| Message ID | 1402994561-29492-1-git-send-email-nicolas.ferre@atmel.com |
|---|---|
| State | New |
| Headers | show |
On 17/06/2014 10:42, Nicolas Ferre : > Arnd, Olof, Kevin, > > As advised by Olof, here is the interesting updated on PWM drivers for AT91 > resent after 3.16-rc1 release. Delaying the inclusion of this material has > solved all the issues with dependecies that previous pull-request had ([GIT > PULL] at91: drivers for 3.16 #1). > > I remind you what it's about: Alexandre did a great job replacing the existing > calls to the older, non-standard drivers by the use of the newer "pwm-atmel" > which takes advantage of the PWM framework. > In addition of removing three obsolete drivers, it also solves an issue with > non existing Kconfig symbols introduced by (misc: atmel_pwm: only build for > supported platforms) which was trying to avoid a build failure... so, all in > all, a pretty good thing! > The diffstat is pretty nice as well ;-) > > Thanks, best regards, After talking to Arnd on IRC. I'll re-spin this series for 3.17, so you can forget it for now on... Bye, > The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f: > > Linux 3.16-rc1 (2014-06-15 17:45:28 -1000) > > are available in the git repository at: > > git://github.com/at91linux/linux-at91.git tags/at91-fixes > > for you to fetch changes up to be6ef50d11bfeec5cce3cf6b463f9094fad1de14: > > misc: atmel_pwm: remove obsolete driver (2014-06-17 10:24:08 +0200) > > ---------------------------------------------------------------- > Atmel PWM driver update for 3.16 > - move to the new PWM driver which uses PWM framework > - remove 3 obsolete drivers (atmel-pwm-bl.c, leds-atmel-pwm.c and atmel_pwm.c) > > ---------------------------------------------------------------- > Alexandre Belloni (15): > ARM: at91: at91sam9g45: switch to generic PWM framework > ARM: at91: sam9m10g45ek: use generic leds_pwm driver > ARM: at91: at91sam9263: switch to generic PWM framework > ARM: at91: sam9263ek: use generic leds_pwm driver > ARM: at91: at91sam9rl: switch to generic PWM framework > ARM: at91: remove useless at91_pwm_leds() > PWM: atmel: allow building for AVR32 > avr32/at32ap: switch to the generic PWM framework > avr32: MRMT: use generic leds_pwm driver > avr32: merisc: use generic leds_pwm driver > avr32: favr-32: use generic pwm_bl driver > avr32: update defconfig to use the generic PWM framework > backlight: atmel-pwm-bl: remove obsolete driver > leds: atmel-pwm: remove obsolete driver > misc: atmel_pwm: remove obsolete driver > > arch/arm/mach-at91/at91sam9263.c | 1 + > arch/arm/mach-at91/at91sam9263_devices.c | 11 +- > arch/arm/mach-at91/at91sam9g45.c | 1 + > arch/arm/mach-at91/at91sam9g45_devices.c | 11 +- > arch/arm/mach-at91/at91sam9rl.c | 1 + > arch/arm/mach-at91/at91sam9rl_devices.c | 11 +- > arch/arm/mach-at91/board-sam9263ek.c | 55 +++- > arch/arm/mach-at91/board-sam9m10g45ek.c | 42 ++- > arch/arm/mach-at91/board.h | 1 - > arch/arm/mach-at91/leds.c | 37 --- > arch/avr32/boards/atngw100/mrmt.c | 34 ++- > arch/avr32/boards/favr-32/setup.c | 48 ++-- > arch/avr32/boards/merisc/setup.c | 34 ++- > arch/avr32/configs/atngw100_mrmt_defconfig | 5 +- > arch/avr32/configs/atstk1002_defconfig | 5 +- > arch/avr32/configs/atstk1003_defconfig | 5 +- > arch/avr32/configs/atstk1004_defconfig | 5 +- > arch/avr32/configs/atstk1006_defconfig | 5 +- > arch/avr32/configs/favr-32_defconfig | 6 +- > arch/avr32/configs/merisc_defconfig | 5 +- > arch/avr32/mach-at32ap/at32ap700x.c | 7 +- > drivers/leds/Kconfig | 8 - > drivers/leds/Makefile | 1 - > drivers/leds/leds-atmel-pwm.c | 149 ----------- > drivers/misc/Kconfig | 10 - > drivers/misc/Makefile | 1 - > drivers/misc/atmel_pwm.c | 402 ----------------------------- > drivers/pwm/Kconfig | 2 +- > drivers/video/backlight/Kconfig | 11 - > drivers/video/backlight/Makefile | 1 - > drivers/video/backlight/atmel-pwm-bl.c | 223 ---------------- > include/linux/atmel-pwm-bl.h | 43 --- > include/linux/atmel_pwm.h | 70 ----- > 33 files changed, 186 insertions(+), 1065 deletions(-) > delete mode 100644 drivers/leds/leds-atmel-pwm.c > delete mode 100644 drivers/misc/atmel_pwm.c > delete mode 100644 drivers/video/backlight/atmel-pwm-bl.c > delete mode 100644 include/linux/atmel-pwm-bl.h > delete mode 100644 include/linux/atmel_pwm.h >
Arnd, Olof, Kevin, As advised by Olof, here is the interesting updated on PWM drivers for AT91 resent after 3.16-rc1 release. Delaying the inclusion of this material has solved all the issues with dependecies that previous pull-request had ([GIT PULL] at91: drivers for 3.16 #1). I remind you what it's about: Alexandre did a great job replacing the existing calls to the older, non-standard drivers by the use of the newer "pwm-atmel" which takes advantage of the PWM framework. In addition of removing three obsolete drivers, it also solves an issue with non existing Kconfig symbols introduced by (misc: atmel_pwm: only build for supported platforms) which was trying to avoid a build failure... so, all in all, a pretty good thing! The diffstat is pretty nice as well ;-) Thanks, best regards, The following changes since commit 7171511eaec5bf23fb06078f59784a3a0626b38f: Linux 3.16-rc1 (2014-06-15 17:45:28 -1000) are available in the git repository at: git://github.com/at91linux/linux-at91.git tags/at91-fixes for you to fetch changes up to be6ef50d11bfeec5cce3cf6b463f9094fad1de14: misc: atmel_pwm: remove obsolete driver (2014-06-17 10:24:08 +0200) ---------------------------------------------------------------- Atmel PWM driver update for 3.16 - move to the new PWM driver which uses PWM framework - remove 3 obsolete drivers (atmel-pwm-bl.c, leds-atmel-pwm.c and atmel_pwm.c) ---------------------------------------------------------------- Alexandre Belloni (15): ARM: at91: at91sam9g45: switch to generic PWM framework ARM: at91: sam9m10g45ek: use generic leds_pwm driver ARM: at91: at91sam9263: switch to generic PWM framework ARM: at91: sam9263ek: use generic leds_pwm driver ARM: at91: at91sam9rl: switch to generic PWM framework ARM: at91: remove useless at91_pwm_leds() PWM: atmel: allow building for AVR32 avr32/at32ap: switch to the generic PWM framework avr32: MRMT: use generic leds_pwm driver avr32: merisc: use generic leds_pwm driver avr32: favr-32: use generic pwm_bl driver avr32: update defconfig to use the generic PWM framework backlight: atmel-pwm-bl: remove obsolete driver leds: atmel-pwm: remove obsolete driver misc: atmel_pwm: remove obsolete driver arch/arm/mach-at91/at91sam9263.c | 1 + arch/arm/mach-at91/at91sam9263_devices.c | 11 +- arch/arm/mach-at91/at91sam9g45.c | 1 + arch/arm/mach-at91/at91sam9g45_devices.c | 11 +- arch/arm/mach-at91/at91sam9rl.c | 1 + arch/arm/mach-at91/at91sam9rl_devices.c | 11 +- arch/arm/mach-at91/board-sam9263ek.c | 55 +++- arch/arm/mach-at91/board-sam9m10g45ek.c | 42 ++- arch/arm/mach-at91/board.h | 1 - arch/arm/mach-at91/leds.c | 37 --- arch/avr32/boards/atngw100/mrmt.c | 34 ++- arch/avr32/boards/favr-32/setup.c | 48 ++-- arch/avr32/boards/merisc/setup.c | 34 ++- arch/avr32/configs/atngw100_mrmt_defconfig | 5 +- arch/avr32/configs/atstk1002_defconfig | 5 +- arch/avr32/configs/atstk1003_defconfig | 5 +- arch/avr32/configs/atstk1004_defconfig | 5 +- arch/avr32/configs/atstk1006_defconfig | 5 +- arch/avr32/configs/favr-32_defconfig | 6 +- arch/avr32/configs/merisc_defconfig | 5 +- arch/avr32/mach-at32ap/at32ap700x.c | 7 +- drivers/leds/Kconfig | 8 - drivers/leds/Makefile | 1 - drivers/leds/leds-atmel-pwm.c | 149 ----------- drivers/misc/Kconfig | 10 - drivers/misc/Makefile | 1 - drivers/misc/atmel_pwm.c | 402 ----------------------------- drivers/pwm/Kconfig | 2 +- drivers/video/backlight/Kconfig | 11 - drivers/video/backlight/Makefile | 1 - drivers/video/backlight/atmel-pwm-bl.c | 223 ---------------- include/linux/atmel-pwm-bl.h | 43 --- include/linux/atmel_pwm.h | 70 ----- 33 files changed, 186 insertions(+), 1065 deletions(-) delete mode 100644 drivers/leds/leds-atmel-pwm.c delete mode 100644 drivers/misc/atmel_pwm.c delete mode 100644 drivers/video/backlight/atmel-pwm-bl.c delete mode 100644 include/linux/atmel-pwm-bl.h delete mode 100644 include/linux/atmel_pwm.h