diff mbox

[v4] ARM: signal: fix armv7-m build issue in sigreturn_codes.S

Message ID 1384932072-8103-2-git-send-email-victor.kamensky@linaro.org
State New
Headers show

Commit Message

Victor Kamensky Nov. 20, 2013, 7:21 a.m. UTC 
After "ARM: signal: sigreturn_codes should be endian neutral to
work in BE8" commit, thumb only platforms, like armv7m, fails to
compile sigreturn_codes.S. The reason is that for such arch
values '.arm' directive and arm opcodes are not allowed.

Fix conditionally enables arm opcodes only if no CONFIG_CPU_THUMBONLY
defined and it uses .org instructions to keep sigreturn_codes
layout.

Suggested-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
 arch/arm/kernel/sigreturn_codes.S | 40 ++++++++++++++++++++++++++++++---------
 1 file changed, 31 insertions(+), 9 deletions(-)

Comments

Dave Martin Nov. 20, 2013, 11:21 a.m. UTC | #1 
On Tue, Nov 19, 2013 at 11:21:12PM -0800, Victor Kamensky wrote:
> After "ARM: signal: sigreturn_codes should be endian neutral to
> work in BE8" commit, thumb only platforms, like armv7m, fails to
> compile sigreturn_codes.S. The reason is that for such arch
> values '.arm' directive and arm opcodes are not allowed.
> 
> Fix conditionally enables arm opcodes only if no CONFIG_CPU_THUMBONLY
> defined and it uses .org instructions to keep sigreturn_codes
> layout.
> 
> Suggested-by: Dave Martin <Dave.Martin@arm.com>
> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>

I believe this looks correct now:

Reviewed-by: Dave Martin <Dave.Martin@arm.com>

Cheers
---Dave

> ---
>  arch/arm/kernel/sigreturn_codes.S | 40 ++++++++++++++++++++++++++++++---------
>  1 file changed, 31 insertions(+), 9 deletions(-)
> 
> diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S
> index 3c5d0f2..b84d0cb 100644
> --- a/arch/arm/kernel/sigreturn_codes.S
> +++ b/arch/arm/kernel/sigreturn_codes.S
> @@ -30,6 +30,27 @@
>   * snippets.
>   */
>  
> +/*
> + * In CPU_THUMBONLY case kernel arm opcodes are not allowed.
> + * Note in this case codes skips those instructions but it uses .org
> + * directive to keep correct layout of sigreturn_codes array.
> + */
> +#ifndef CONFIG_CPU_THUMBONLY
> +#define ARM_OK(code...)	code
> +#else
> +#define ARM_OK(code...)
> +#endif
> +
> +	.macro arm_slot n
> +	.org	sigreturn_codes + 12 * (\n)
> +ARM_OK(	.arm	)
> +	.endm
> +
> +	.macro thumb_slot n
> +	.org	sigreturn_codes + 12 * (\n) + 8
> +	.thumb
> +	.endm
> +
>  #if __LINUX_ARM_ARCH__ <= 4
>  	/*
>  	 * Note we manually set minimally required arch that supports
> @@ -45,26 +66,27 @@
>  	.global sigreturn_codes
>  	.type	sigreturn_codes, #object
>  
> -	.arm
> +	.align
>  
>  sigreturn_codes:
>  
>  	/* ARM sigreturn syscall code snippet */
> -	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
> -	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
> +	arm_slot 0
> +ARM_OK(	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)	)
> +ARM_OK(	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)	)
>  
>  	/* Thumb sigreturn syscall code snippet */
> -	.thumb
> +	thumb_slot 0
>  	movs	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
>  	swi	#0
>  
>  	/* ARM sigreturn_rt syscall code snippet */
> -	.arm
> -	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
> -	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
> +	arm_slot 1
> +ARM_OK(	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)	)
> +ARM_OK(	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)	)
>  
>  	/* Thumb sigreturn_rt syscall code snippet */
> -	.thumb
> +	thumb_slot 1
>  	movs	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
>  	swi	#0
>  
> @@ -74,7 +96,7 @@ sigreturn_codes:
>  	 * it is thumb case or not, so we need additional
>  	 * word after real last entry.
>  	 */
> -	.arm
> +	arm_slot 2
>  	.space	4
>  
>  	.size	sigreturn_codes, . - sigreturn_codes
> -- 
> 1.8.1.4
> 
> 
> _______________________________________________
> linaro-kernel mailing list
> linaro-kernel@lists.linaro.org
> http://lists.linaro.org/mailman/listinfo/linaro-kernel
Victor Kamensky Nov. 21, 2013, 6:24 a.m. UTC | #2 
On 20 November 2013 03:21, Dave Martin <Dave.Martin@arm.com> wrote:
> On Tue, Nov 19, 2013 at 11:21:12PM -0800, Victor Kamensky wrote:
>> After "ARM: signal: sigreturn_codes should be endian neutral to
>> work in BE8" commit, thumb only platforms, like armv7m, fails to
>> compile sigreturn_codes.S. The reason is that for such arch
>> values '.arm' directive and arm opcodes are not allowed.
>>
>> Fix conditionally enables arm opcodes only if no CONFIG_CPU_THUMBONLY
>> defined and it uses .org instructions to keep sigreturn_codes
>> layout.
>>
>> Suggested-by: Dave Martin <Dave.Martin@arm.com>
>> Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
>> Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
>
> I believe this looks correct now:
>
> Reviewed-by: Dave Martin <Dave.Martin@arm.com>

It is posted to Russell's patch system now.

Dave, thank you very much for help and guidance.
Uwe, thank you for reporting, testing.

Thanks,
Victor

> Cheers
> ---Dave
>
>> ---
>>  arch/arm/kernel/sigreturn_codes.S | 40 ++++++++++++++++++++++++++++++---------
>>  1 file changed, 31 insertions(+), 9 deletions(-)
>>
>> diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S
>> index 3c5d0f2..b84d0cb 100644
>> --- a/arch/arm/kernel/sigreturn_codes.S
>> +++ b/arch/arm/kernel/sigreturn_codes.S
>> @@ -30,6 +30,27 @@
>>   * snippets.
>>   */
>>
>> +/*
>> + * In CPU_THUMBONLY case kernel arm opcodes are not allowed.
>> + * Note in this case codes skips those instructions but it uses .org
>> + * directive to keep correct layout of sigreturn_codes array.
>> + */
>> +#ifndef CONFIG_CPU_THUMBONLY
>> +#define ARM_OK(code...)      code
>> +#else
>> +#define ARM_OK(code...)
>> +#endif
>> +
>> +     .macro arm_slot n
>> +     .org    sigreturn_codes + 12 * (\n)
>> +ARM_OK(      .arm    )
>> +     .endm
>> +
>> +     .macro thumb_slot n
>> +     .org    sigreturn_codes + 12 * (\n) + 8
>> +     .thumb
>> +     .endm
>> +
>>  #if __LINUX_ARM_ARCH__ <= 4
>>       /*
>>        * Note we manually set minimally required arch that supports
>> @@ -45,26 +66,27 @@
>>       .global sigreturn_codes
>>       .type   sigreturn_codes, #object
>>
>> -     .arm
>> +     .align
>>
>>  sigreturn_codes:
>>
>>       /* ARM sigreturn syscall code snippet */
>> -     mov     r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
>> -     swi     #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
>> +     arm_slot 0
>> +ARM_OK(      mov     r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)       )
>> +ARM_OK(      swi     #(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)      )
>>
>>       /* Thumb sigreturn syscall code snippet */
>> -     .thumb
>> +     thumb_slot 0
>>       movs    r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
>>       swi     #0
>>
>>       /* ARM sigreturn_rt syscall code snippet */
>> -     .arm
>> -     mov     r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
>> -     swi     #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
>> +     arm_slot 1
>> +ARM_OK(      mov     r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)    )
>> +ARM_OK(      swi     #(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)   )
>>
>>       /* Thumb sigreturn_rt syscall code snippet */
>> -     .thumb
>> +     thumb_slot 1
>>       movs    r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
>>       swi     #0
>>
>> @@ -74,7 +96,7 @@ sigreturn_codes:
>>        * it is thumb case or not, so we need additional
>>        * word after real last entry.
>>        */
>> -     .arm
>> +     arm_slot 2
>>       .space  4
>>
>>       .size   sigreturn_codes, . - sigreturn_codes
>> --
>> 1.8.1.4
>>
>>
>> _______________________________________________
>> linaro-kernel mailing list
>> linaro-kernel@lists.linaro.org
>> http://lists.linaro.org/mailman/listinfo/linaro-kernel
diff mbox

Patch

diff --git a/arch/arm/kernel/sigreturn_codes.S b/arch/arm/kernel/sigreturn_codes.S
index 3c5d0f2..b84d0cb 100644
--- a/arch/arm/kernel/sigreturn_codes.S
+++ b/arch/arm/kernel/sigreturn_codes.S
@@ -30,6 +30,27 @@ 
  * snippets.
  */
 
+/*
+ * In CPU_THUMBONLY case kernel arm opcodes are not allowed.
+ * Note in this case codes skips those instructions but it uses .org
+ * directive to keep correct layout of sigreturn_codes array.
+ */
+#ifndef CONFIG_CPU_THUMBONLY
+#define ARM_OK(code...)	code
+#else
+#define ARM_OK(code...)
+#endif
+
+	.macro arm_slot n
+	.org	sigreturn_codes + 12 * (\n)
+ARM_OK(	.arm	)
+	.endm
+
+	.macro thumb_slot n
+	.org	sigreturn_codes + 12 * (\n) + 8
+	.thumb
+	.endm
+
 #if __LINUX_ARM_ARCH__ <= 4
 	/*
 	 * Note we manually set minimally required arch that supports
@@ -45,26 +66,27 @@ 
 	.global sigreturn_codes
 	.type	sigreturn_codes, #object
 
-	.arm
+	.align
 
 sigreturn_codes:
 
 	/* ARM sigreturn syscall code snippet */
-	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
-	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+	arm_slot 0
+ARM_OK(	mov	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)	)
+ARM_OK(	swi	#(__NR_sigreturn)|(__NR_OABI_SYSCALL_BASE)	)
 
 	/* Thumb sigreturn syscall code snippet */
-	.thumb
+	thumb_slot 0
 	movs	r7, #(__NR_sigreturn - __NR_SYSCALL_BASE)
 	swi	#0
 
 	/* ARM sigreturn_rt syscall code snippet */
-	.arm
-	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
-	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)
+	arm_slot 1
+ARM_OK(	mov	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)	)
+ARM_OK(	swi	#(__NR_rt_sigreturn)|(__NR_OABI_SYSCALL_BASE)	)
 
 	/* Thumb sigreturn_rt syscall code snippet */
-	.thumb
+	thumb_slot 1
 	movs	r7, #(__NR_rt_sigreturn - __NR_SYSCALL_BASE)
 	swi	#0
 
@@ -74,7 +96,7 @@  sigreturn_codes:
 	 * it is thumb case or not, so we need additional
 	 * word after real last entry.
 	 */
-	.arm
+	arm_slot 2
 	.space	4
 
 	.size	sigreturn_codes, . - sigreturn_codes