| Message ID | 1380559686-2605-1-git-send-email-nicolas.ferre@atmel.com |
|---|---|
| State | New |
| Headers | show |
On Mon, Sep 30, 2013 at 9:48 AM, Nicolas Ferre <nicolas.ferre@atmel.com> wrote: > Arnd, Olof, Kevin, > > Second batch of fixes for AT91. Two little patches but that can be important > for AT91. > One is finishing the conversion to clk_xxx_[un]prepare() routines. That will > allow us to begin the move to common clock framework with help from Boris and > his big patch series. I tried to push it through Thomas and John's git tree but > without success. It sounds to me like this patch should go in together with the CCF patches, since it doesn't address a regression and is just a prerequisite for the conversion? If you can shake an Ack out of John you should be all set for that. :-) > The other one is important for sam9g45 when the second DDR conrtoller is in > use. The DDR / EBI lines are not properly reseted after a shutdown and could > prevent the use of whatever is connected to this EBI. It is not a configuration > that we are using on the Evaluation Kit and this explains why we face this isue > just now... Ok, that sounds like a valid fix. I'll cherry-pick in the DDR fix right away, and if you for some reason need the other one we can add it later, but it sounds like it should just go in with the CCF branch. -Olof
Arnd, Olof, Kevin, Second batch of fixes for AT91. Two little patches but that can be important for AT91. One is finishing the conversion to clk_xxx_[un]prepare() routines. That will allow us to begin the move to common clock framework with help from Boris and his big patch series. I tried to push it through Thomas and John's git tree but without success. The other one is important for sam9g45 when the second DDR conrtoller is in use. The DDR / EBI lines are not properly reseted after a shutdown and could prevent the use of whatever is connected to this EBI. It is not a configuration that we are using on the Evaluation Kit and this explains why we face this isue just now... Thanks, best regards, The following changes since commit 9ceb389dddbcdb87830f01fcf84d94b2da581dae: ARM: at91: remove IRQF_DISABLED (2013-09-19 15:36:35 +0200) are available in the git repository at: git://github.com/at91linux/linux-at91.git tags/at91-fixes for you to fetch changes up to 93f6319386b1bd57c9937c818bf1de0b81f03271: ARM: at91: sam9g45: shutdown ddr1 too when rebooting (2013-09-30 18:24:52 +0200) ---------------------------------------------------------------- 2nd fixes series for 3.12 - one TC clocksource enhancement that is the remaining patch that moves to clk_xxx_[un]prepare() - management of second DDR controller for the sam9g45 shutdown. This routine also applies to most of other sam9s. ---------------------------------------------------------------- Boris BREZILLON (1): ARM: at91/tc/clocksource: replace clk_enable/disable with clk_prepare_enable/disable_unprepare. Jean-Christophe PLAGNIOL-VILLARD (1): ARM: at91: sam9g45: shutdown ddr1 too when rebooting arch/arm/mach-at91/at91sam9g45_reset.S | 8 ++++++++ drivers/clocksource/tcb_clksrc.c | 10 +++++----- 2 files changed, 13 insertions(+), 5 deletions(-)