| Message ID | 1374079538-19548-7-git-send-email-nm@ti.com |
|---|---|
| State | New |
| Headers | show |
diff --git a/arch/arm/boot/dts/omap5-uevm.dts b/arch/arm/boot/dts/omap5-uevm.dts index c6d560b..1550d6a 100644 --- a/arch/arm/boot/dts/omap5-uevm.dts +++ b/arch/arm/boot/dts/omap5-uevm.dts @@ -372,10 +372,8 @@ ldo4_reg: ldo4 { /* VDDAPHY_DISP: vdda_dsiport/hdmi */ regulator-name = "ldo4"; - regulator-min-microvolt = <2200000>; - regulator-max-microvolt = <2200000>; - regulator-always-on; - regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1800000>; }; ldo5_reg: ldo5 {
commit e00c27ef3b4c23e39d0a77b7c8e5be44c28001c7 (ARM: dts: OMAP5: Add Palmas MFD node and regulator nodes) introduced regulator entries for OMAP5uEVM. However, The regulator information is based on an older temporary pre-production board variant and does not reflect production board 750-2628-XXX boards. LDO4 supplies VDDAPHY_DISP which is vdda_dsiporta/c/vdda_hdmi This can only be supplied at 1.5V or 1.8V and we currently supply 2.2V. To prevent any potential device damage risk, use the specified 1.5V-1.8V supply. Remove 'always-on' and 'boot-on' settings here as it is a 'on need' supply to SoC IP and is not enabled by PMIC by default at boot. Reported-by: Marc Jüttner <m-juettner@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> --- arch/arm/boot/dts/omap5-uevm.dts | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)