@@ -11,6 +11,7 @@
#include <mach/mx28.h>
#include <mach/devices-common.h>
#include <mach/mxsfb.h>
+#include <linux/usb/mxs-usb.h>
extern const struct amba_device mx28_duart_device __initconst;
#define mx28_add_duart() \
@@ -47,6 +48,10 @@ extern const struct mxs_mxs_mmc_data mx28_mxs_mmc_data[] __initconst;
#define mx28_add_mxs_pwm(id) mxs_add_mxs_pwm(MX28_PWM_BASE_ADDR, id)
+extern const struct mxs_usbh_data mx28_mxs_usbh_data[] __initconst;
+#define mx28_add_mxs_usbh(id, pdata) \
+ mxs_add_mxs_usbh(&mx28_mxs_usbh_data[id], pdata)
+
struct platform_device *__init mx28_add_mxsfb(
const struct mxsfb_platform_data *pdata);
@@ -32,3 +32,6 @@ config MXS_HAVE_PLATFORM_MXS_SAIF
config MXS_HAVE_PLATFORM_RTC_STMP3XXX
bool
+
+config MXS_HAVE_PLATFORM_USB
+ bool
@@ -11,3 +11,4 @@ obj-y += platform-gpio-mxs.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXSFB) += platform-mxsfb.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_MXS_SAIF) += platform-mxs-saif.o
obj-$(CONFIG_MXS_HAVE_PLATFORM_RTC_STMP3XXX) += platform-rtc-stmp3xxx.o
+obj-$(CONFIG_MXS_HAVE_PLATFORM_USB) += platform-usb.o
new file mode 100644
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation.
+ */
+
+#include <linux/compiler.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/fsl_devices.h>
+#include <linux/usb/mxs-usb.h>
+
+#include <mach/mx23.h>
+#include <mach/mx28.h>
+#include <mach/devices-common.h>
+
+#define mxs_usbh_data_entry_single(soc, _id, hwid) \
+ { \
+ .id = _id, \
+ .usb_irq = soc ## _INT_USB ## hwid, \
+ .phy_irq = soc ## _INT_USB ## hwid ## _WAKEUP, \
+ .usb_iobase = soc ## _USBCTRL ## hwid ## _BASE_ADDR, \
+ .phy_iobase = soc ## _USBPHY ## hwid ## _BASE_ADDR, \
+ }
+
+#define mxs_usbh_data_entry(soc, _id, hwid) \
+ [_id] = mxs_usbh_data_entry_single(soc, _id, hwid)
+
+#ifdef CONFIG_SOC_IMX23
+const struct mxs_usbh_data mx23_mxs_usbh_data[] __initconst = {
+ mxs_usbh_data_entry(MX23, 0, 0),
+};
+#endif
+
+#ifdef CONFIG_SOC_IMX28
+const struct mxs_usbh_data mx28_mxs_usbh_data[] __initconst = {
+ mxs_usbh_data_entry(MX28, 0, 0),
+ mxs_usbh_data_entry(MX28, 1, 1),
+};
+#endif
+
+void __init mxs_add_mxs_usbh(const struct mxs_usbh_data *data,
+ const struct imx_usb_platform_data *pdata)
+{
+ struct platform_device *pdev;
+ struct resource phy_res[] = {
+ {
+ .start = data->phy_iobase,
+ .end = data->phy_iobase + SZ_256 - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->usb_irq,
+ .end = data->usb_irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ struct resource usb_res[] = {
+ {
+ .start = data->usb_iobase,
+ .end = data->usb_iobase + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = data->usb_irq,
+ .end = data->usb_irq,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .start = data->phy_irq,
+ .end = data->phy_irq,
+ .flags = IORESOURCE_IRQ,
+ },
+ };
+
+ pdev = mxs_add_platform_device_dmamask("mxs-usb-phy", data->id,
+ phy_res, ARRAY_SIZE(phy_res),
+ pdata, sizeof(*pdata),
+ DMA_BIT_MASK(32));
+ if (!pdev)
+ pr_err("Failed to register USB PHY driver!\n");
+
+ pdev = mxs_add_platform_device_dmamask("imx-otg", data->id,
+ usb_res, ARRAY_SIZE(usb_res),
+ pdata, sizeof(*pdata),
+ DMA_BIT_MASK(32));
+ if (!pdev)
+ pr_err("Failed to register USB Host driver!\n");
+}
@@ -10,6 +10,8 @@
#include <linux/platform_device.h>
#include <linux/init.h>
#include <linux/amba/bus.h>
+#include <linux/fsl_devices.h>
+#include <linux/usb/mxs-usb.h>
extern struct device mxs_apbh_bus;
@@ -42,6 +44,17 @@ struct mxs_auart_data {
struct platform_device *__init mxs_add_auart(
const struct mxs_auart_data *data);
+/* usb host */
+struct mxs_usbh_data {
+ int id;
+ resource_size_t usb_irq;
+ resource_size_t phy_irq;
+ resource_size_t usb_iobase;
+ resource_size_t phy_iobase;
+};
+void __init mxs_add_mxs_usbh(const struct mxs_usbh_data *data,
+ const struct imx_usb_platform_data *pdata);
+
/* fec */
#include <linux/fec.h>
struct mxs_fec_data {
Based on code by: Tony Lin <tony.lin@freescale.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Chen Peter-B29397 <B29397@freescale.com> Cc: Detlev Zundel <dzu@denx.de> Cc: Fabio Estevam <festevam@gmail.com> Cc: Li Frank-B20596 <B20596@freescale.com> Cc: Linux USB <linux-usb@vger.kernel.org> Cc: Liu JunJie-B08287 <B08287@freescale.com> Cc: Sascha Hauer <s.hauer@pengutronix.de> Cc: Shawn Guo <shawn.guo@linaro.org> Cc: Shi Make-B15407 <B15407@freescale.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Subodh Nijsure <snijsure@grid-net.com> Cc: Wolfgang Denk <wd@denx.de> --- arch/arm/mach-mxs/devices-mx28.h | 5 ++ arch/arm/mach-mxs/devices/Kconfig | 3 + arch/arm/mach-mxs/devices/Makefile | 1 + arch/arm/mach-mxs/devices/platform-usb.c | 89 +++++++++++++++++++++++ arch/arm/mach-mxs/include/mach/devices-common.h | 13 ++++ 5 files changed, 111 insertions(+) create mode 100644 arch/arm/mach-mxs/devices/platform-usb.c