diff mbox

[3/3] ARM: mxs/tx28: convert to new leds-gpio registration helper

Message ID 1306609503-31746-3-git-send-email-u.kleine-koenig@pengutronix.de
State New
Headers show

Commit Message

Uwe Kleine-König May 28, 2011, 7:05 p.m. UTC 
This allows to move the led definition to .init.rodata.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Cc: Shawn Guo <shawn.guo@linaro.org>
---
 arch/arm/mach-mxs/Kconfig     |    1 +
 arch/arm/mach-mxs/mach-tx28.c |    5 ++---
 2 files changed, 3 insertions(+), 3 deletions(-)

Comments

Shawn Guo May 31, 2011, 6:09 a.m. UTC | #1 
On Sat, May 28, 2011 at 09:05:03PM +0200, Uwe Kleine-König wrote:
> This allows to move the led definition to .init.rodata.
> 
> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> Cc: Shawn Guo <shawn.guo@linaro.org>

Acked-by: Shawn Guo <shawn.guo@linaro.org>
diff mbox

Patch

diff --git a/arch/arm/mach-mxs/Kconfig b/arch/arm/mach-mxs/Kconfig
index f114960..162b0b0 100644
--- a/arch/arm/mach-mxs/Kconfig
+++ b/arch/arm/mach-mxs/Kconfig
@@ -55,6 +55,7 @@  config MACH_MX28EVK
 config MODULE_TX28
 	bool
 	select SOC_IMX28
+	select LEDS_GPIO_REGISTER
 	select MXS_HAVE_AMBA_DUART
 	select MXS_HAVE_PLATFORM_AUART
 	select MXS_HAVE_PLATFORM_FEC
diff --git a/arch/arm/mach-mxs/mach-tx28.c b/arch/arm/mach-mxs/mach-tx28.c
index b65e371..fff6b17 100644
--- a/arch/arm/mach-mxs/mach-tx28.c
+++ b/arch/arm/mach-mxs/mach-tx28.c
@@ -117,7 +117,7 @@  static const iomux_cfg_t tx28_stk5v3_pads[] __initconst = {
 		(MXS_PAD_12MA | MXS_PAD_3V3 | MXS_PAD_NOPULL),
 };
 
-static struct gpio_led tx28_stk5v3_leds[] = {
+static const struct gpio_led tx28_stk5v3_leds[] __initconst = {
 	{
 		.name = "GPIO-LED",
 		.default_trigger = "heartbeat",
@@ -159,8 +159,7 @@  static void __init tx28_stk5v3_init(void)
 	/* spi via ssp will be added when available */
 	spi_register_board_info(tx28_spi_board_info,
 			ARRAY_SIZE(tx28_spi_board_info));
-	mxs_add_platform_device("leds-gpio", 0, NULL, 0,
-			&tx28_stk5v3_led_data, sizeof(tx28_stk5v3_led_data));
+	gpio_led_register_device(0, &tx28_stk5v3_led_data);
 	mx28_add_mxs_i2c(0);
 	i2c_register_board_info(0, tx28_stk5v3_i2c_boardinfo,
 			ARRAY_SIZE(tx28_stk5v3_i2c_boardinfo));