From patchwork Thu May 5 21:59:43 2011 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?b?UmFmYcWCIE1pxYJlY2tp?= X-Patchwork-Id: 94319 Return-Path: X-Original-To: incoming-imx@patchwork.ozlabs.org Delivered-To: patchwork-incoming-imx@bilbo.ozlabs.org Received: from bombadil.infradead.org (bombadil.infradead.org [18.85.46.34]) (using TLSv1 with cipher DHE-RSA-AES256-SHA (256/256 bits)) (Client did not present a certificate) by ozlabs.org (Postfix) with ESMTPS id B0513B6F35 for ; Fri, 6 May 2011 07:22:41 +1000 (EST) Received: from canuck.infradead.org ([2001:4978:20e::1]) by bombadil.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1QI60K-0000S4-4a; Thu, 05 May 2011 21:22:36 +0000 Received: from localhost ([127.0.0.1] helo=canuck.infradead.org) by canuck.infradead.org with esmtp (Exim 4.72 #1 (Red Hat Linux)) id 1QI60I-0001qp-0x; Thu, 05 May 2011 21:22:34 +0000 Received: from mail-ey0-f177.google.com ([209.85.215.177]) by canuck.infradead.org with esmtps (Exim 4.72 #1 (Red Hat Linux)) id 1QI5zt-0001ps-IC; Thu, 05 May 2011 21:22:19 +0000 Received: by eyh6 with SMTP id 6so889623eyh.36 for ; Thu, 05 May 2011 14:22:07 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=gamma; h=domainkey-signature:from:to:cc:subject:date:message-id:x-mailer :mime-version:content-type:content-transfer-encoding; bh=L4R1pXJcuJkeSju4ZTf685/tDSwYTzBu8ttk2WMYUxc=; b=XbkXFfBCrElyPRbVBfdh5WDkN9jFzod0PYbnLaMx1dCxcYfxYA6QvstTtuZMN5kEUZ X8rQgvdp6sA+d4HgrqjmroP5TPT/7pgPrB6sIgnwv62vOC7oliFuosj+o6n1+03Gk4Fs xU9h97EvQ2IEDMIGmzVa3SHqW8IauRAeJgvxg= DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:subject:date:message-id:x-mailer:mime-version :content-type:content-transfer-encoding; b=YVOCGLHyYN8WukZSQOZOf6BX6x3GNwbk7XMEViPkWR19VvinbQ0VpNA9A7Uz/foF+D aiuPn3gZGIq0U9EkhSupoCdxog1/XlEbInIw21cbVsP5E3+XvGDeLVc0F+sT8Dt2jtAq MCkcsa0Z+Yv1xMaRZm4CN+nW5iBCwXaQwmBUw= Received: by 10.14.51.144 with SMTP id b16mr1480936eec.126.1304630525787; Thu, 05 May 2011 14:22:05 -0700 (PDT) Received: from localhost.localdomain (c14-108.icpnet.pl [62.21.14.108]) by mx.google.com with ESMTPS id 46sm783996ees.25.2011.05.05.14.22.02 (version=TLSv1/SSLv3 cipher=OTHER); Thu, 05 May 2011 14:22:03 -0700 (PDT) From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= To: linux-wireless@vger.kernel.org, "John W. Linville" Subject: [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver Date: Thu, 5 May 2011 23:59:43 +0200 Message-Id: <1304632783-8781-1-git-send-email-zajec5@gmail.com> X-Mailer: git-send-email 1.7.3.4 MIME-Version: 1.0 X-CRM114-Version: 20090807-BlameThorstenAndJenny ( TRE 0.7.6 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20110505_172210_696546_B0AD3A2D X-CRM114-Status: GOOD ( 30.27 ) X-Spam-Score: 1.4 (+) X-Spam-Report: SpamAssassin version 3.3.1 on canuck.infradead.org summary: Content analysis details: (1.4 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.7 RCVD_IN_DNSWL_LOW RBL: Sender listed at http://www.dnswl.org/, low trust [209.85.215.177 listed in list.dnswl.org] 0.0 FREEMAIL_FROM Sender email is freemail (zajec5[at]gmail.com) 2.2 FREEMAIL_ENVFROM_END_DIGIT Envelope-from freemail username ends in digit (zajec5[at]gmail.com) -0.1 DKIM_VALID_AU Message has a valid DKIM or DK signature from author's domain 0.1 DKIM_SIGNED Message has a DKIM or DK signature, not necessarily valid -0.1 DKIM_VALID Message has at least one valid DKIM or DK signature 0.0 RFC_ABUSE_POST Both abuse and postmaster missing on sender domain Cc: George Kashperko , Russell King , Arnd Bergmann , Greg KH , =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= , "linux-kernel@vger.kernel.org" , b43-dev@lists.infradead.org, =?UTF-8?q?Michael=20B=C3=BCsch?= , Arend van Spriel , linuxdriverproject , Andy Botting , linux-arm-kernel@lists.infradead.org, Larry Finger X-BeenThere: linux-arm-kernel@lists.infradead.org X-Mailman-Version: 2.1.12 Precedence: list List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Sender: linux-arm-kernel-bounces@lists.infradead.org Errors-To: linux-arm-kernel-bounces+incoming-imx=patchwork.ozlabs.org@lists.infradead.org List-Id: linux-imx-kernel.lists.patchwork.ozlabs.org Cc: Greg KH Cc: Michael Büsch Cc: Larry Finger Cc: George Kashperko Cc: Arend van Spriel Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King Cc: Arnd Bergmann Cc: Andy Botting Cc: linuxdriverproject Cc: linux-kernel@vger.kernel.org Signed-off-by: Rafał Miłecki --- V2: Rename to axi Use DEFINE_PCI_DEVICE_TABLE in bridge Make use of pr_fmt and pr_* Store core class Rename bridge to not b43 specific Replace magic 0x1000 with BCMAI_CORE_SIZE Remove some old "ssb" names and defines Move BCMAI_ADDR_BASE def Add drvdata field V3: Fix reloading (kfree issue) Add 14e4:0x4331 Fix non-initialized struct issue Drop useless inline functions wrappers for pci core drv Proper pr_* usage V3.1: Include forgotten changes (pr_* and include related) Explain why we dare to implement empty release function V4: Add ABI documentation Move struct device to wrapper and alloc it dynamically checkpatch.pl pointed fixes V5: Rename to bcma, AXI was really bad name Use EXPORT_SYMBOL_GPL Set pci driver fields in one place Drop unlikely Use BCMA_CORE_SIZE for calc in awrite32 Add README Fix compilation (delay.h) --- Documentation/ABI/testing/sysfs-bus-bcma | 31 ++ drivers/Kconfig | 2 + drivers/Makefile | 1 + drivers/bcma/Kconfig | 33 +++ drivers/bcma/Makefile | 7 + drivers/bcma/README | 18 ++ drivers/bcma/TODO | 3 + drivers/bcma/bcma_private.h | 31 ++ drivers/bcma/core.c | 51 ++++ drivers/bcma/driver_chipcommon.c | 87 ++++++ drivers/bcma/driver_chipcommon_pmu.c | 134 +++++++++ drivers/bcma/driver_pci.c | 163 +++++++++++ drivers/bcma/host_pci.c | 196 +++++++++++++ drivers/bcma/main.c | 271 ++++++++++++++++++ drivers/bcma/scan.c | 392 +++++++++++++++++++++++++++ drivers/bcma/scan.h | 56 ++++ include/linux/bcma/bcma.h | 232 ++++++++++++++++ include/linux/bcma/bcma_driver_chipcommon.h | 297 ++++++++++++++++++++ include/linux/bcma/bcma_driver_pci.h | 89 ++++++ include/linux/bcma/bcma_regs.h | 34 +++ include/linux/mod_devicetable.h | 17 ++ scripts/mod/file2alias.c | 22 ++ 22 files changed, 2167 insertions(+), 0 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-bus-bcma create mode 100644 drivers/bcma/Kconfig create mode 100644 drivers/bcma/Makefile create mode 100644 drivers/bcma/README create mode 100644 drivers/bcma/TODO create mode 100644 drivers/bcma/bcma_private.h create mode 100644 drivers/bcma/core.c create mode 100644 drivers/bcma/driver_chipcommon.c create mode 100644 drivers/bcma/driver_chipcommon_pmu.c create mode 100644 drivers/bcma/driver_pci.c create mode 100644 drivers/bcma/host_pci.c create mode 100644 drivers/bcma/main.c create mode 100644 drivers/bcma/scan.c create mode 100644 drivers/bcma/scan.h create mode 100644 include/linux/bcma/bcma.h create mode 100644 include/linux/bcma/bcma_driver_chipcommon.h create mode 100644 include/linux/bcma/bcma_driver_pci.h create mode 100644 include/linux/bcma/bcma_regs.h diff --git a/Documentation/ABI/testing/sysfs-bus-bcma b/Documentation/ABI/testing/sysfs-bus-bcma new file mode 100644 index 0000000..ad3cd69 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-bcma @@ -0,0 +1,31 @@ +What: /sys/bus/bcma/devices/.../class +Date: May 2011 +KernelVersion: 2.6.40 +Contact: Rafał Miłecki +Description: + Each AXI core is identified by few fields, including class it + belongs to. See include/linux/bcma/bcma.h for possible values. + +What: /sys/bus/bcma/devices/.../manuf +Date: May 2011 +KernelVersion: 2.6.40 +Contact: Rafał Miłecki +Description: + Each AXI core has it's manufacturer id. See + include/linux/bcma/bcma.h for possible values. + +What: /sys/bus/bcma/devices/.../rev +Date: May 2011 +KernelVersion: 2.6.40 +Contact: Rafał Miłecki +Description: + AXI cores of the same type can still slightly differ depending + on their revision. Use it for detailed programming. + +What: /sys/bus/bcma/devices/.../id +Date: May 2011 +KernelVersion: 2.6.40 +Contact: Rafał Miłecki +Description: + There are a few types of AXI cores, they can be identified by + id field. diff --git a/drivers/Kconfig b/drivers/Kconfig index 177c7d1..aca7067 100644 --- a/drivers/Kconfig +++ b/drivers/Kconfig @@ -68,6 +68,8 @@ source "drivers/watchdog/Kconfig" source "drivers/ssb/Kconfig" +source "drivers/bcma/Kconfig" + source "drivers/mfd/Kconfig" source "drivers/regulator/Kconfig" diff --git a/drivers/Makefile b/drivers/Makefile index 3f135b6..a29527f 100644 --- a/drivers/Makefile +++ b/drivers/Makefile @@ -110,6 +110,7 @@ obj-$(CONFIG_HID) += hid/ obj-$(CONFIG_PPC_PS3) += ps3/ obj-$(CONFIG_OF) += of/ obj-$(CONFIG_SSB) += ssb/ +obj-$(CONFIG_BCMA) += bcma/ obj-$(CONFIG_VHOST_NET) += vhost/ obj-$(CONFIG_VLYNQ) += vlynq/ obj-$(CONFIG_STAGING) += staging/ diff --git a/drivers/bcma/Kconfig b/drivers/bcma/Kconfig new file mode 100644 index 0000000..353781b --- /dev/null +++ b/drivers/bcma/Kconfig @@ -0,0 +1,33 @@ +config BCMA_POSSIBLE + bool + depends on HAS_IOMEM && HAS_DMA + default y + +menu "Broadcom specific AMBA" + depends on BCMA_POSSIBLE + +config BCMA + tristate "BCMA support" + depends on BCMA_POSSIBLE + help + Bus driver for Broadcom specific Advanced Microcontroller Bus + Architecture. + +config BCMA_HOST_PCI_POSSIBLE + bool + depends on BCMA && PCI = y + default y + +config BCMA_HOST_PCI + bool "Support for BCMA on PCI-host bus" + depends on BCMA_HOST_PCI_POSSIBLE + +config BCMA_DEBUG + bool "BCMA debugging" + depends on BCMA + help + This turns on additional debugging messages. + + If unsure, say N + +endmenu diff --git a/drivers/bcma/Makefile b/drivers/bcma/Makefile new file mode 100644 index 0000000..0d56245 --- /dev/null +++ b/drivers/bcma/Makefile @@ -0,0 +1,7 @@ +bcma-y += main.o scan.o core.o +bcma-y += driver_chipcommon.o driver_chipcommon_pmu.o +bcma-y += driver_pci.o +bcma-$(CONFIG_BCMA_HOST_PCI) += host_pci.o +obj-$(CONFIG_BCMA) += bcma.o + +ccflags-$(CONFIG_BCMA_DEBUG) := -DDEBUG diff --git a/drivers/bcma/README b/drivers/bcma/README new file mode 100644 index 0000000..b52cd2b --- /dev/null +++ b/drivers/bcma/README @@ -0,0 +1,18 @@ +Broadcom introduced new bus as replacement for older SSB. It is based on AMBA, +however from programming point of view there is nothing AMBA specific we use. + +Standard AMBA drivers are platform specific, have hardcoded addresses and use +AMBA standard fields like CID and PID. + +In case of Broadcom's cards every device consists of: +1) Broadcom specific AMBA device. It is put on AMBA bus, but can not be treated + as standard AMBA device. Reading it's CID or PID can cause machine lockup. +2) AMBA standard devices called ports or wrappers. They have CIDs (AMBA_CID) + and PIDs (0x103BB369), but we do not use that info for anything. One of that + devices is used for managing Broadcom specific core. + +Addresses of AMBA devices are not hardcoded in driver and have to be read from +EPROM. + +In this situation we decided to introduce separated bus with devices identified +by Broadcom specific fields, read from EPROM. diff --git a/drivers/bcma/TODO b/drivers/bcma/TODO new file mode 100644 index 0000000..45eadc9 --- /dev/null +++ b/drivers/bcma/TODO @@ -0,0 +1,3 @@ +- Interrupts +- Defines for PCI core driver +- Convert bcma_bus->cores into linked list diff --git a/drivers/bcma/bcma_private.h b/drivers/bcma/bcma_private.h new file mode 100644 index 0000000..2a55f3e --- /dev/null +++ b/drivers/bcma/bcma_private.h @@ -0,0 +1,31 @@ +#ifndef LINUX_BCMA_PRIVATE_H_ +#define LINUX_BCMA_PRIVATE_H_ + +#ifndef pr_fmt +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#endif + +#include +#include + +#define BCMA_ADDR_BASE 0x18000000 +#define BCMA_WRAP_BASE 0x18100000 + +#define BCMA_CORE_SIZE 0x1000 + +struct bcma_bus; + +/* main.c */ +extern int bcma_bus_register(struct bcma_bus *bus); +extern void bcma_bus_unregister(struct bcma_bus *bus); + +/* scan.c */ +int bcma_bus_scan(struct bcma_bus *bus); + +#ifdef CONFIG_BCMA_HOST_PCI +/* host_pci.c */ +extern int __init bcma_host_pci_init(void); +extern void __exit bcma_host_pci_exit(void); +#endif /* CONFIG_BCMA_HOST_PCI */ + +#endif diff --git a/drivers/bcma/core.c b/drivers/bcma/core.c new file mode 100644 index 0000000..ced379f --- /dev/null +++ b/drivers/bcma/core.c @@ -0,0 +1,51 @@ +/* + * Broadcom specific AMBA + * Core ops + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include + +bool bcma_core_is_enabled(struct bcma_device *core) +{ + if ((bcma_aread32(core, BCMA_IOCTL) & (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC)) + != BCMA_IOCTL_CLK) + return false; + if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) + return false; + return true; +} +EXPORT_SYMBOL_GPL(bcma_core_is_enabled); + +static void bcma_core_disable(struct bcma_device *core, u32 flags) +{ + if (bcma_aread32(core, BCMA_RESET_CTL) & BCMA_RESET_CTL_RESET) + return; + + bcma_awrite32(core, BCMA_IOCTL, flags); + bcma_aread32(core, BCMA_IOCTL); + udelay(10); + + bcma_awrite32(core, BCMA_RESET_CTL, BCMA_RESET_CTL_RESET); + udelay(1); +} + +int bcma_core_enable(struct bcma_device *core, u32 flags) +{ + bcma_core_disable(core, flags); + + bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | BCMA_IOCTL_FGC | flags)); + bcma_aread32(core, BCMA_IOCTL); + + bcma_awrite32(core, BCMA_RESET_CTL, 0); + udelay(1); + + bcma_awrite32(core, BCMA_IOCTL, (BCMA_IOCTL_CLK | flags)); + bcma_aread32(core, BCMA_IOCTL); + udelay(1); + + return 0; +} +EXPORT_SYMBOL_GPL(bcma_core_enable); diff --git a/drivers/bcma/driver_chipcommon.c b/drivers/bcma/driver_chipcommon.c new file mode 100644 index 0000000..caf5960 --- /dev/null +++ b/drivers/bcma/driver_chipcommon.c @@ -0,0 +1,87 @@ +/* + * Broadcom specific AMBA + * ChipCommon core driver + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include + +static inline u32 bcma_cc_write32_masked(struct bcma_drv_cc *cc, u16 offset, + u32 mask, u32 value) +{ + value &= mask; + value |= bcma_cc_read32(cc, offset) & ~mask; + bcma_cc_write32(cc, offset, value); + + return value; +} + +void bcma_core_chipcommon_init(struct bcma_drv_cc *cc) +{ + if (cc->core->id.rev >= 11) + cc->status = bcma_cc_read32(cc, BCMA_CC_CHIPSTAT); + cc->capabilities = bcma_cc_read32(cc, BCMA_CC_CAP); + if (cc->core->id.rev >= 35) + cc->capabilities_ext = bcma_cc_read32(cc, BCMA_CC_CAP_EXT); + + bcma_cc_write32(cc, 0x58, 0); + bcma_cc_write32(cc, 0x5C, 0); + + if (cc->capabilities & BCMA_CC_CAP_PMU) + bcma_pmu_init(cc); + if (cc->capabilities & BCMA_CC_CAP_PCTL) + pr_err("Power control not implemented!\n"); +} + +/* Set chip watchdog reset timer to fire in 'ticks' backplane cycles */ +void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, u32 ticks) +{ + /* instant NMI */ + bcma_cc_write32(cc, BCMA_CC_WATCHDOG, ticks); +} + +void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + bcma_cc_write32_masked(cc, BCMA_CC_IRQMASK, mask, value); +} + +u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask) +{ + return bcma_cc_read32(cc, BCMA_CC_IRQSTAT) & mask; +} + +u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask) +{ + return bcma_cc_read32(cc, BCMA_CC_GPIOIN) & mask; +} + +u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUT, mask, value); +} + +u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOOUTEN, mask, value); +} + +u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOCTL, mask, value); +} +EXPORT_SYMBOL_GPL(bcma_chipco_gpio_control); + +u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOIRQ, mask, value); +} + +u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value) +{ + return bcma_cc_write32_masked(cc, BCMA_CC_GPIOPOL, mask, value); +} diff --git a/drivers/bcma/driver_chipcommon_pmu.c b/drivers/bcma/driver_chipcommon_pmu.c new file mode 100644 index 0000000..f44177a --- /dev/null +++ b/drivers/bcma/driver_chipcommon_pmu.c @@ -0,0 +1,134 @@ +/* + * Broadcom specific AMBA + * ChipCommon Power Management Unit driver + * + * Copyright 2009, Michael Buesch + * Copyright 2007, Broadcom Corporation + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include + +static void bcma_chipco_chipctl_maskset(struct bcma_drv_cc *cc, + u32 offset, u32 mask, u32 set) +{ + u32 value; + + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_ADDR, offset); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_ADDR); + value = bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); + value &= mask; + value |= set; + bcma_cc_write32(cc, BCMA_CC_CHIPCTL_DATA, value); + bcma_cc_read32(cc, BCMA_CC_CHIPCTL_DATA); +} + +static void bcma_pmu_pll_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4313: + case 0x4331: + case 43224: + case 43225: + break; + default: + pr_err("PLL init unknown for device 0x%04X\n", + bus->chipinfo.id); + } +} + +static void bcma_pmu_resources_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + u32 min_msk = 0, max_msk = 0; + + switch (bus->chipinfo.id) { + case 0x4313: + min_msk = 0x200D; + max_msk = 0xFFFF; + break; + case 43224: + break; + default: + pr_err("PMU resource config unknown for device 0x%04X\n", + bus->chipinfo.id); + } + + /* Set the resource masks. */ + if (min_msk) + bcma_cc_write32(cc, BCMA_CC_PMU_MINRES_MSK, min_msk); + if (max_msk) + bcma_cc_write32(cc, BCMA_CC_PMU_MAXRES_MSK, max_msk); +} + +void bcma_pmu_swreg_init(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4313: + case 0x4331: + case 43224: + break; + default: + pr_err("PMU switch/regulators init unknown for device " + "0x%04X\n", bus->chipinfo.id); + } +} + +void bcma_pmu_workarounds(struct bcma_drv_cc *cc) +{ + struct bcma_bus *bus = cc->core->bus; + + switch (bus->chipinfo.id) { + case 0x4313: + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0x7); + break; + case 0x4331: + pr_err("Enabling Ext PA lines not implemented\n"); + break; + case 43224: + if (bus->chipinfo.rev == 0) { + pr_err("Workarounds for 43224 rev 0 not fully " + "implemented\n"); + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); + } else { + bcma_chipco_chipctl_maskset(cc, 0, ~0, 0xF0); + } + break; + default: + pr_err("Workarounds unknown for device 0x%04X\n", + bus->chipinfo.id); + } +} + +void bcma_pmu_init(struct bcma_drv_cc *cc) +{ + u32 pmucap; + + pmucap = bcma_cc_read32(cc, BCMA_CC_PMU_CAP); + cc->pmu.rev = (pmucap & BCMA_CC_PMU_CAP_REVISION); + + pr_debug("Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, + pmucap); + + if (cc->pmu.rev == 1) + bcma_cc_mask32(cc, BCMA_CC_PMU_CTL, + ~BCMA_CC_PMU_CTL_NOILPONW); + else + bcma_cc_set32(cc, BCMA_CC_PMU_CTL, + BCMA_CC_PMU_CTL_NOILPONW); + + if (cc->core->id.id == 0x4329 && cc->core->id.rev == 2) + pr_err("Fix for 4329b0 bad LPOM state not implemented!\n"); + + bcma_pmu_pll_init(cc); + bcma_pmu_resources_init(cc); + bcma_pmu_swreg_init(cc); + bcma_pmu_workarounds(cc); +} diff --git a/drivers/bcma/driver_pci.c b/drivers/bcma/driver_pci.c new file mode 100644 index 0000000..b98b835 --- /dev/null +++ b/drivers/bcma/driver_pci.c @@ -0,0 +1,163 @@ +/* + * Broadcom specific AMBA + * PCI Core + * + * Copyright 2005, Broadcom Corporation + * Copyright 2006, 2007, Michael Buesch + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include + +/************************************************** + * R/W ops. + **************************************************/ + +static u32 bcma_pcie_read(struct bcma_drv_pci *pc, u32 address) +{ + pcicore_write32(pc, 0x130, address); + pcicore_read32(pc, 0x130); + return pcicore_read32(pc, 0x134); +} + +#if 0 +static void bcma_pcie_write(struct bcma_drv_pci *pc, u32 address, u32 data) +{ + pcicore_write32(pc, 0x130, address); + pcicore_read32(pc, 0x130); + pcicore_write32(pc, 0x134, data); +} +#endif + +static void bcma_pcie_mdio_set_phy(struct bcma_drv_pci *pc, u8 phy) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + u32 v; + int i; + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 28); /* Write Transaction */ + v |= (1 << 17); /* Turnaround */ + v |= (0x1F << 18); + v |= (phy << 4); + pcicore_write32(pc, mdio_data, v); + + udelay(10); + for (i = 0; i < 200; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) + break; + msleep(1); + } +} + +static u16 bcma_pcie_mdio_read(struct bcma_drv_pci *pc, u8 device, u8 address) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + int max_retries = 10; + u16 ret = 0; + u32 v; + int i; + + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); + } + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 29); /* Read Transaction */ + v |= (1 << 17); /* Turnaround */ + if (pc->core->id.rev < 10) + v |= (u32)device << 22; + v |= (u32)address << 18; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < 200; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) { + udelay(10); + ret = pcicore_read32(pc, mdio_data); + break; + } + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); + return ret; +} + +static void bcma_pcie_mdio_write(struct bcma_drv_pci *pc, u8 device, + u8 address, u16 data) +{ + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + int max_retries = 10; + u32 v; + int i; + + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + + if (pc->core->id.rev >= 10) { + max_retries = 200; + bcma_pcie_mdio_set_phy(pc, device); + } + + v = (1 << 30); /* Start of Transaction */ + v |= (1 << 28); /* Write Transaction */ + v |= (1 << 17); /* Turnaround */ + if (pc->core->id.rev < 10) + v |= (u32)device << 22; + v |= (u32)address << 18; + v |= data; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); + for (i = 0; i < max_retries; i++) { + v = pcicore_read32(pc, mdio_control); + if (v & 0x100 /* Trans complete */) + break; + msleep(1); + } + pcicore_write32(pc, mdio_control, 0); +} + +/************************************************** + * Workarounds. + **************************************************/ + +static u8 bcma_pcicore_polarity_workaround(struct bcma_drv_pci *pc) +{ + return (bcma_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; +} + +static void bcma_pcicore_serdes_workaround(struct bcma_drv_pci *pc) +{ + const u8 serdes_pll_device = 0x1D; + const u8 serdes_rx_device = 0x1F; + u16 tmp; + + bcma_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, + bcma_pcicore_polarity_workaround(pc)); + tmp = bcma_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); + if (tmp & 0x4000) + bcma_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); +} + +/************************************************** + * Init. + **************************************************/ + +void bcma_core_pci_init(struct bcma_drv_pci *pc) +{ + bcma_pcicore_serdes_workaround(pc); +} diff --git a/drivers/bcma/host_pci.c b/drivers/bcma/host_pci.c new file mode 100644 index 0000000..99dd36e --- /dev/null +++ b/drivers/bcma/host_pci.c @@ -0,0 +1,196 @@ +/* + * Broadcom specific AMBA + * PCI Host + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include +#include + +static void bcma_host_pci_switch_core(struct bcma_device *core) +{ + pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN, + core->addr); + pci_write_config_dword(core->bus->host_pci, BCMA_PCI_BAR0_WIN2, + core->wrap); + core->bus->mapped_core = core; + pr_debug("Switched to core: 0x%X\n", core->id.id); +} + +static u8 bcma_host_pci_read8(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread8(core->bus->mmio + offset); +} + +static u16 bcma_host_pci_read16(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread16(core->bus->mmio + offset); +} + +static u32 bcma_host_pci_read32(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread32(core->bus->mmio + offset); +} + +static void bcma_host_pci_write8(struct bcma_device *core, u16 offset, + u8 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite8(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write16(struct bcma_device *core, u16 offset, + u16 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite16(value, core->bus->mmio + offset); +} + +static void bcma_host_pci_write32(struct bcma_device *core, u16 offset, + u32 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite32(value, core->bus->mmio + offset); +} + +static u32 bcma_host_pci_aread32(struct bcma_device *core, u16 offset) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + return ioread32(core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); +} + +static void bcma_host_pci_awrite32(struct bcma_device *core, u16 offset, + u32 value) +{ + if (core->bus->mapped_core != core) + bcma_host_pci_switch_core(core); + iowrite32(value, core->bus->mmio + (1 * BCMA_CORE_SIZE) + offset); +} + +const struct bcma_host_ops bcma_host_pci_ops = { + .read8 = bcma_host_pci_read8, + .read16 = bcma_host_pci_read16, + .read32 = bcma_host_pci_read32, + .write8 = bcma_host_pci_write8, + .write16 = bcma_host_pci_write16, + .write32 = bcma_host_pci_write32, + .aread32 = bcma_host_pci_aread32, + .awrite32 = bcma_host_pci_awrite32, +}; + +static int bcma_host_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct bcma_bus *bus; + int err = -ENOMEM; + const char *name; + u32 val; + + /* Alloc */ + bus = kzalloc(sizeof(*bus), GFP_KERNEL); + if (!bus) + goto out; + + /* Basic PCI configuration */ + err = pci_enable_device(dev); + if (err) + goto err_kfree_bus; + + name = dev_name(&dev->dev); + if (dev->driver && dev->driver->name) + name = dev->driver->name; + err = pci_request_regions(dev, name); + if (err) + goto err_pci_disable; + pci_set_master(dev); + + /* Disable the RETRY_TIMEOUT register (0x41) to keep + * PCI Tx retries from interfering with C3 CPU state */ + pci_read_config_dword(dev, 0x40, &val); + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(dev, 0x40, val & 0xffff00ff); + + /* SSB needed additional powering up, do we have any AMBA PCI cards? */ + if (!pci_is_pcie(dev)) + pr_err("PCI card detected, report problems.\n"); + + /* Map MMIO */ + err = -ENOMEM; + bus->mmio = pci_iomap(dev, 0, ~0UL); + if (!bus->mmio) + goto err_pci_release_regions; + + /* Host specific */ + bus->host_pci = dev; + bus->hosttype = BCMA_HOSTTYPE_PCI; + bus->ops = &bcma_host_pci_ops; + + /* Register */ + err = bcma_bus_register(bus); + if (err) + goto err_pci_unmap_mmio; + + pci_set_drvdata(dev, bus); + +out: + return err; + +err_pci_unmap_mmio: + pci_iounmap(dev, bus->mmio); +err_pci_release_regions: + pci_release_regions(dev); +err_pci_disable: + pci_disable_device(dev); +err_kfree_bus: + kfree(bus); + return err; +} + +static void bcma_host_pci_remove(struct pci_dev *dev) +{ + struct bcma_bus *bus = pci_get_drvdata(dev); + + bcma_bus_unregister(bus); + pci_iounmap(dev, bus->mmio); + pci_release_regions(dev); + pci_disable_device(dev); + kfree(bus); + pci_set_drvdata(dev, NULL); +} + +static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = { + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) }, + { 0, }, +}; +MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl); + +static struct pci_driver bcma_pci_bridge_driver = { + .name = "bcma-pci-bridge", + .id_table = bcma_pci_bridge_tbl, + .probe = bcma_host_pci_probe, + .remove = bcma_host_pci_remove, +}; + +int __init bcma_host_pci_init(void) +{ + return pci_register_driver(&bcma_pci_bridge_driver); +} + +void __exit bcma_host_pci_exit(void) +{ + pci_unregister_driver(&bcma_pci_bridge_driver); +} diff --git a/drivers/bcma/main.c b/drivers/bcma/main.c new file mode 100644 index 0000000..a46c0fd --- /dev/null +++ b/drivers/bcma/main.c @@ -0,0 +1,271 @@ +/* + * Broadcom specific AMBA + * Bus subsystem + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "bcma_private.h" +#include + +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); +MODULE_LICENSE("GPL"); + +static int bcma_bus_match(struct device *dev, struct device_driver *drv); +static int bcma_device_probe(struct device *dev); +static int bcma_device_remove(struct device *dev); + +static ssize_t manuf_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct __bcma_dev_wrapper *wrapper = container_of(dev, + struct __bcma_dev_wrapper, dev); + return sprintf(buf, "0x%03X\n", wrapper->core->id.manuf); +} +static ssize_t id_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct __bcma_dev_wrapper *wrapper = container_of(dev, + struct __bcma_dev_wrapper, dev); + return sprintf(buf, "0x%03X\n", wrapper->core->id.id); +} +static ssize_t rev_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct __bcma_dev_wrapper *wrapper = container_of(dev, + struct __bcma_dev_wrapper, dev); + return sprintf(buf, "0x%02X\n", wrapper->core->id.rev); +} +static ssize_t class_show(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct __bcma_dev_wrapper *wrapper = container_of(dev, + struct __bcma_dev_wrapper, dev); + return sprintf(buf, "0x%X\n", wrapper->core->id.class); +} +static struct device_attribute bcma_device_attrs[] = { + __ATTR_RO(manuf), + __ATTR_RO(id), + __ATTR_RO(rev), + __ATTR_RO(class), + __ATTR_NULL, +}; + +static struct bus_type bcma_bus_type = { + .name = "bcma", + .match = bcma_bus_match, + .probe = bcma_device_probe, + .remove = bcma_device_remove, + .dev_attrs = bcma_device_attrs, +}; + +static struct bcma_device *bcma_find_core(struct bcma_bus *bus, u16 coreid) +{ + u8 i; + for (i = 0; i < bus->nr_cores; i++) { + if (bus->cores[i].id.id == coreid) + return &bus->cores[i]; + } + return NULL; +} + +static void bcma_release_core_dev(struct device *dev) +{ + struct __bcma_dev_wrapper *wrapper = container_of(dev, + struct __bcma_dev_wrapper, dev); + kfree(wrapper); +} + +static int bcma_register_cores(struct bcma_bus *bus) +{ + struct bcma_device *core; + struct __bcma_dev_wrapper *wrapper; + int i, err, dev_id = 0; + + for (i = 0; i < bus->nr_cores; i++) { + core = &(bus->cores[i]); + + /* We support that cores ourself */ + switch (core->id.id) { + case BCMA_CORE_CHIPCOMMON: + case BCMA_CORE_PCI: + case BCMA_CORE_PCIE: + continue; + } + + wrapper = kzalloc(sizeof(*wrapper), GFP_KERNEL); + if (!wrapper) { + pr_err("Could not allocate wrapper for core 0x%03X\n", + core->id.id); + continue; + } + + wrapper->core = core; + wrapper->dev.release = bcma_release_core_dev; + wrapper->dev.bus = &bcma_bus_type; + dev_set_name(&wrapper->dev, "bcma%d:%d", 0/*bus->num*/, dev_id); + + switch (bus->hosttype) { + case BCMA_HOSTTYPE_PCI: + wrapper->dev.parent = &bus->host_pci->dev; + break; + case BCMA_HOSTTYPE_NONE: + case BCMA_HOSTTYPE_SDIO: + break; + } + + err = device_register(&wrapper->dev); + if (err) { + pr_err("Could not register dev for core 0x%03X\n", + core->id.id); + kfree(wrapper); + continue; + } + core->dev = &wrapper->dev; + dev_id++; + } + + return 0; +} + +static void bcma_unregister_cores(struct bcma_bus *bus) +{ + struct bcma_device *core; + int i; + + for (i = 0; i < bus->nr_cores; i++) { + core = &(bus->cores[i]); + if (core->dev) + device_unregister(core->dev); + } +} + +int bcma_bus_register(struct bcma_bus *bus) +{ + int err; + struct bcma_device *core; + + /* Scan for devices (cores) */ + err = bcma_bus_scan(bus); + if (err) { + pr_err("Failed to scan: %d\n", err); + return -1; + } + + /* Init CC core */ + core = bcma_find_core(bus, BCMA_CORE_CHIPCOMMON); + if (core) { + bus->drv_cc.core = core; + bcma_core_chipcommon_init(&bus->drv_cc); + } + + /* Init PCIE core */ + core = bcma_find_core(bus, BCMA_CORE_PCIE); + if (core) { + bus->drv_pci.core = core; + bcma_core_pci_init(&bus->drv_pci); + } + + /* Register found cores */ + bcma_register_cores(bus); + + pr_info("Bus registered\n"); + + return 0; +} +EXPORT_SYMBOL_GPL(bcma_bus_register); + +void bcma_bus_unregister(struct bcma_bus *bus) +{ + bcma_unregister_cores(bus); +} +EXPORT_SYMBOL_GPL(bcma_bus_unregister); + +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner) +{ + drv->drv.name = drv->name; + drv->drv.bus = &bcma_bus_type; + drv->drv.owner = owner; + + return driver_register(&drv->drv); +} +EXPORT_SYMBOL_GPL(__bcma_driver_register); + +void bcma_driver_unregister(struct bcma_driver *drv) +{ + driver_unregister(&drv->drv); +} +EXPORT_SYMBOL_GPL(bcma_driver_unregister); + +static int bcma_bus_match(struct device *dev, struct device_driver *drv) +{ + struct __bcma_dev_wrapper *wrapper = container_of(dev, + struct __bcma_dev_wrapper, dev); + struct bcma_device *core = wrapper->core; + struct bcma_driver *adrv = container_of(drv, struct bcma_driver, drv); + const struct bcma_device_id *cid = &core->id; + const struct bcma_device_id *did; + + for (did = adrv->id_table; did->manuf || did->id || did->rev; did++) { + if ((did->manuf == cid->manuf || did->manuf == BCMA_ANY_MANUF) && + (did->id == cid->id || did->id == BCMA_ANY_ID) && + (did->rev == cid->rev || did->rev == BCMA_ANY_REV) && + (did->class == cid->class || did->class == BCMA_ANY_CLASS)) + return 1; + } + return 0; +} + +static int bcma_device_probe(struct device *dev) +{ + struct __bcma_dev_wrapper *wrapper = container_of(dev, + struct __bcma_dev_wrapper, dev); + struct bcma_device *core = wrapper->core; + struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver, + drv); + int err = 0; + + if (adrv->probe) + err = adrv->probe(core); + + return err; +} + +static int bcma_device_remove(struct device *dev) +{ + struct __bcma_dev_wrapper *wrapper = container_of(dev, + struct __bcma_dev_wrapper, dev); + struct bcma_device *core = wrapper->core; + struct bcma_driver *adrv = container_of(dev->driver, struct bcma_driver, + drv); + + if (adrv->remove) + adrv->remove(core); + + return 0; +} + +static int __init bcma_modinit(void) +{ + int err; + + err = bus_register(&bcma_bus_type); + if (err) + return err; + +#ifdef CONFIG_BCMA_HOST_PCI + err = bcma_host_pci_init(); + if (err) { + pr_err("PCI host initialization failed\n"); + err = 0; + } +#endif + + return err; +} +fs_initcall(bcma_modinit); + +static void __exit bcma_modexit(void) +{ +#ifdef CONFIG_BCMA_HOST_PCI + bcma_host_pci_exit(); +#endif + bus_unregister(&bcma_bus_type); +} +module_exit(bcma_modexit) diff --git a/drivers/bcma/scan.c b/drivers/bcma/scan.c new file mode 100644 index 0000000..ddf3d26 --- /dev/null +++ b/drivers/bcma/scan.c @@ -0,0 +1,392 @@ +/* + * Broadcom specific AMBA + * Bus scanning + * + * Licensed under the GNU/GPL. See COPYING for details. + */ + +#include "scan.h" +#include "bcma_private.h" + +#include +#include +#include +#include +#include +#include + +const char *bcma_device_name(u16 coreid) +{ + switch (coreid) { + case BCMA_CORE_OOB_ROUTER: + return "OOB Router"; + case BCMA_CORE_INVALID: + return "Invalid"; + case BCMA_CORE_CHIPCOMMON: + return "ChipCommon"; + case BCMA_CORE_ILINE20: + return "ILine 20"; + case BCMA_CORE_SRAM: + return "SRAM"; + case BCMA_CORE_SDRAM: + return "SDRAM"; + case BCMA_CORE_PCI: + return "PCI"; + case BCMA_CORE_MIPS: + return "MIPS"; + case BCMA_CORE_ETHERNET: + return "Fast Ethernet"; + case BCMA_CORE_V90: + return "V90"; + case BCMA_CORE_USB11_HOSTDEV: + return "USB 1.1 Hostdev"; + case BCMA_CORE_ADSL: + return "ADSL"; + case BCMA_CORE_ILINE100: + return "ILine 100"; + case BCMA_CORE_IPSEC: + return "IPSEC"; + case BCMA_CORE_UTOPIA: + return "UTOPIA"; + case BCMA_CORE_PCMCIA: + return "PCMCIA"; + case BCMA_CORE_INTERNAL_MEM: + return "Internal Memory"; + case BCMA_CORE_MEMC_SDRAM: + return "MEMC SDRAM"; + case BCMA_CORE_OFDM: + return "OFDM"; + case BCMA_CORE_EXTIF: + return "EXTIF"; + case BCMA_CORE_80211: + return "IEEE 802.11"; + case BCMA_CORE_PHY_A: + return "PHY A"; + case BCMA_CORE_PHY_B: + return "PHY B"; + case BCMA_CORE_PHY_G: + return "PHY G"; + case BCMA_CORE_MIPS_3302: + return "MIPS 3302"; + case BCMA_CORE_USB11_HOST: + return "USB 1.1 Host"; + case BCMA_CORE_USB11_DEV: + return "USB 1.1 Device"; + case BCMA_CORE_USB20_HOST: + return "USB 2.0 Host"; + case BCMA_CORE_USB20_DEV: + return "USB 2.0 Device"; + case BCMA_CORE_SDIO_HOST: + return "SDIO Host"; + case BCMA_CORE_ROBOSWITCH: + return "Roboswitch"; + case BCMA_CORE_PARA_ATA: + return "PATA"; + case BCMA_CORE_SATA_XORDMA: + return "SATA XOR-DMA"; + case BCMA_CORE_ETHERNET_GBIT: + return "GBit Ethernet"; + case BCMA_CORE_PCIE: + return "PCIe"; + case BCMA_CORE_PHY_N: + return "PHY N"; + case BCMA_CORE_SRAM_CTL: + return "SRAM Controller"; + case BCMA_CORE_MINI_MACPHY: + return "Mini MACPHY"; + case BCMA_CORE_ARM_1176: + return "ARM 1176"; + case BCMA_CORE_ARM_7TDMI: + return "ARM 7TDMI"; + case BCMA_CORE_PHY_LP: + return "PHY LP"; + case BCMA_CORE_PMU: + return "PMU"; + case BCMA_CORE_PHY_SSN: + return "PHY SSN"; + case BCMA_CORE_SDIO_DEV: + return "SDIO Device"; + case BCMA_CORE_ARM_CM3: + return "ARM CM3"; + case BCMA_CORE_PHY_HT: + return "PHY HT"; + case BCMA_CORE_MIPS_74K: + return "MIPS 74K"; + case BCMA_CORE_MAC_GBIT: + return "GBit MAC"; + case BCMA_CORE_DDR12_MEM_CTL: + return "DDR1/DDR2 Memory Controller"; + case BCMA_CORE_PCIE_RC: + return "PCIe Root Complex"; + case BCMA_CORE_OCP_OCP_BRIDGE: + return "OCP to OCP Bridge"; + case BCMA_CORE_SHARED_COMMON: + return "Common Shared"; + case BCMA_CORE_OCP_AHB_BRIDGE: + return "OCP to AHB Bridge"; + case BCMA_CORE_SPI_HOST: + return "SPI Host"; + case BCMA_CORE_I2S: + return "I2S"; + case BCMA_CORE_SDR_DDR1_MEM_CTL: + return "SDR/DDR1 Memory Controller"; + case BCMA_CORE_SHIM: + return "SHIM"; + case BCMA_CORE_DEFAULT: + return "Default"; + } + return "UNKNOWN"; +} + +static u32 bcma_scan_read32(struct bcma_bus *bus, u8 current_coreidx, + u16 offset) +{ + return readl(bus->mmio + offset); +} + +static void bcma_scan_switch_core(struct bcma_bus *bus, u32 addr) +{ + if (bus->hosttype == BCMA_HOSTTYPE_PCI) + pci_write_config_dword(bus->host_pci, BCMA_PCI_BAR0_WIN, + addr); +} + +static u32 bcma_erom_get_ent(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = readl(*eromptr); + (*eromptr)++; + return ent; +} + +static void bcma_erom_push_ent(u32 **eromptr) +{ + (*eromptr)--; +} + +static s32 bcma_erom_get_ci(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + if (!(ent & SCAN_ER_VALID)) + return -1; + if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_CI) + return -2; + return ent; +} + +static bool bcma_erom_is_end(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + bcma_erom_push_ent(eromptr); + return (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)); +} + +static bool bcma_erom_is_bridge(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + bcma_erom_push_ent(eromptr); + return (((ent & SCAN_ER_VALID)) && + ((ent & SCAN_ER_TAGX) == SCAN_ER_TAG_ADDR) && + ((ent & SCAN_ADDR_TYPE) == SCAN_ADDR_TYPE_BRIDGE)); +} + +static void bcma_erom_skip_component(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent; + while (1) { + ent = bcma_erom_get_ent(bus, eromptr); + if ((ent & SCAN_ER_VALID) && + ((ent & SCAN_ER_TAG) == SCAN_ER_TAG_CI)) + break; + if (ent == (SCAN_ER_TAG_END | SCAN_ER_VALID)) + break; + } + bcma_erom_push_ent(eromptr); +} + +static s32 bcma_erom_get_mst_port(struct bcma_bus *bus, u32 **eromptr) +{ + u32 ent = bcma_erom_get_ent(bus, eromptr); + if (!(ent & SCAN_ER_VALID)) + return -1; + if ((ent & SCAN_ER_TAG) != SCAN_ER_TAG_MP) + return -2; + return ent; +} + +static s32 bcma_erom_get_addr_desc(struct bcma_bus *bus, u32 **eromptr, + u32 type, u8 port) +{ + u32 addrl, addrh, sizel, sizeh = 0; + u32 size; + + u32 ent = bcma_erom_get_ent(bus, eromptr); + if ((!(ent & SCAN_ER_VALID)) || + ((ent & SCAN_ER_TAGX) != SCAN_ER_TAG_ADDR) || + ((ent & SCAN_ADDR_TYPE) != type) || + (((ent & SCAN_ADDR_PORT) >> SCAN_ADDR_PORT_SHIFT) != port)) { + bcma_erom_push_ent(eromptr); + return -1; + } + + addrl = ent & SCAN_ADDR_ADDR; + if (ent & SCAN_ADDR_AG32) + addrh = bcma_erom_get_ent(bus, eromptr); + else + addrh = 0; + + if ((ent & SCAN_ADDR_SZ) == SCAN_ADDR_SZ_SZD) { + size = bcma_erom_get_ent(bus, eromptr); + sizel = size & SCAN_SIZE_SZ; + if (size & SCAN_SIZE_SG32) + sizeh = bcma_erom_get_ent(bus, eromptr); + } else + sizel = SCAN_ADDR_SZ_BASE << + ((ent & SCAN_ADDR_SZ) >> SCAN_ADDR_SZ_SHIFT); + + return addrl; +} + +int bcma_bus_scan(struct bcma_bus *bus) +{ + u32 erombase; + u32 __iomem *eromptr, *eromend; + + s32 cia, cib; + u8 ports[2], wrappers[2]; + + s32 tmp; + u8 i, j; + + bus->nr_cores = 0; + + bcma_scan_switch_core(bus, BCMA_ADDR_BASE); + + tmp = bcma_scan_read32(bus, 0, BCMA_CC_ID); + bus->chipinfo.id = (tmp & BCMA_CC_ID_ID) >> BCMA_CC_ID_ID_SHIFT; + bus->chipinfo.rev = (tmp & BCMA_CC_ID_REV) >> BCMA_CC_ID_REV_SHIFT; + bus->chipinfo.pkg = (tmp & BCMA_CC_ID_PKG) >> BCMA_CC_ID_PKG_SHIFT; + + erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM); + eromptr = bus->mmio; + eromend = eromptr + BCMA_CORE_SIZE / sizeof(u32); + + bcma_scan_switch_core(bus, erombase); + + while (eromptr < eromend) { + struct bcma_device core = { }; + core.bus = bus; + + /* get CIs */ + cia = bcma_erom_get_ci(bus, &eromptr); + if (cia < 0) { + bcma_erom_push_ent(&eromptr); + if (bcma_erom_is_end(bus, &eromptr)) + break; + return -1; + } + cib = bcma_erom_get_ci(bus, &eromptr); + if (cib < 0) + return -2; + + /* parse CIs */ + core.id.class = (cia & SCAN_CIA_CLASS) >> SCAN_CIA_CLASS_SHIFT; + core.id.id = (cia & SCAN_CIA_ID) >> SCAN_CIA_ID_SHIFT; + core.id.manuf = (cia & SCAN_CIA_MANUF) >> SCAN_CIA_MANUF_SHIFT; + ports[0] = (cib & SCAN_CIB_NMP) >> SCAN_CIB_NMP_SHIFT; + ports[1] = (cib & SCAN_CIB_NSP) >> SCAN_CIB_NSP_SHIFT; + wrappers[0] = (cib & SCAN_CIB_NMW) >> SCAN_CIB_NMW_SHIFT; + wrappers[1] = (cib & SCAN_CIB_NSW) >> SCAN_CIB_NSW_SHIFT; + core.id.rev = (cib & SCAN_CIB_REV) >> SCAN_CIB_REV_SHIFT; + + if (((core.id.manuf == BCMA_MANUF_ARM) && + (core.id.id == 0xFFF)) || + (ports[1] == 0)) { + bcma_erom_skip_component(bus, &eromptr); + continue; + } + + /* check if component is a core at all */ + if (wrappers[0] + wrappers[1] == 0) { + /* we could save addrl of the router + if (cid == BCMA_CORE_OOB_ROUTER) + */ + bcma_erom_skip_component(bus, &eromptr); + continue; + } + + if (bcma_erom_is_bridge(bus, &eromptr)) { + bcma_erom_skip_component(bus, &eromptr); + continue; + } + + /* get & parse master ports */ + for (i = 0; i < ports[0]; i++) { + u32 mst_port_d = bcma_erom_get_mst_port(bus, &eromptr); + if (mst_port_d < 0) + return -3; + } + + /* get & parse slave ports */ + for (i = 0; i < ports[1]; i++) { + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, &eromptr, + SCAN_ADDR_TYPE_SLAVE, i); + if (tmp < 0) { + /* no more entries for port _i_ */ + /* pr_debug("erom: slave port %d " + * "has %d descriptors\n", i, j); */ + break; + } else { + if (i == 0 && j == 0) + core.addr = tmp; + } + } + } + + /* get & parse master wrappers */ + for (i = 0; i < wrappers[0]; i++) { + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, &eromptr, + SCAN_ADDR_TYPE_MWRAP, i); + if (tmp < 0) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * "has %d descriptors\n", i, j); */ + break; + } else { + if (i == 0 && j == 0) + core.wrap = tmp; + } + } + } + + /* get & parse slave wrappers */ + for (i = 0; i < wrappers[1]; i++) { + u8 hack = (ports[1] == 1) ? 0 : 1; + for (j = 0; ; j++) { + tmp = bcma_erom_get_addr_desc(bus, &eromptr, + SCAN_ADDR_TYPE_SWRAP, i + hack); + if (tmp < 0) { + /* no more entries for port _i_ */ + /* pr_debug("erom: master wrapper %d " + * has %d descriptors\n", i, j); */ + break; + } else { + if (wrappers[0] == 0 && !i && !j) + core.wrap = tmp; + } + } + } + + pr_info("Core %d found: %s " + "(manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n", + bus->nr_cores, bcma_device_name(core.id.id), + core.id.manuf, core.id.id, core.id.rev, + core.id.class); + + core.core_index = bus->nr_cores; + bus->cores[bus->nr_cores++] = core; + } + + return 0; +} diff --git a/drivers/bcma/scan.h b/drivers/bcma/scan.h new file mode 100644 index 0000000..113e6a6 --- /dev/null +++ b/drivers/bcma/scan.h @@ -0,0 +1,56 @@ +#ifndef BCMA_SCAN_H_ +#define BCMA_SCAN_H_ + +#define BCMA_ADDR_BASE 0x18000000 +#define BCMA_WRAP_BASE 0x18100000 + +#define SCAN_ER_VALID 0x00000001 +#define SCAN_ER_TAGX 0x00000006 /* we have to ignore 0x8 bit when checking tag for SCAN_ER_TAG_ADDR */ +#define SCAN_ER_TAG 0x0000000E +#define SCAN_ER_TAG_CI 0x00000000 +#define SCAN_ER_TAG_MP 0x00000002 +#define SCAN_ER_TAG_ADDR 0x00000004 +#define SCAN_ER_TAG_END 0x0000000E +#define SCAN_ER_BAD 0xFFFFFFFF + +#define SCAN_CIA_CLASS 0x000000F0 +#define SCAN_CIA_CLASS_SHIFT 4 +#define SCAN_CIA_ID 0x000FFF00 +#define SCAN_CIA_ID_SHIFT 8 +#define SCAN_CIA_MANUF 0xFFF00000 +#define SCAN_CIA_MANUF_SHIFT 20 + +#define SCAN_CIB_NMP 0x000001F0 +#define SCAN_CIB_NMP_SHIFT 4 +#define SCAN_CIB_NSP 0x00003E00 +#define SCAN_CIB_NSP_SHIFT 9 +#define SCAN_CIB_NMW 0x0007C000 +#define SCAN_CIB_NMW_SHIFT 14 +#define SCAN_CIB_NSW 0x00F80000 +#define SCAN_CIB_NSW_SHIFT 17 +#define SCAN_CIB_REV 0xFF000000 +#define SCAN_CIB_REV_SHIFT 24 + +#define SCAN_ADDR_AG32 0x00000008 +#define SCAN_ADDR_SZ 0x00000030 +#define SCAN_ADDR_SZ_SHIFT 4 +#define SCAN_ADDR_SZ_4K 0x00000000 +#define SCAN_ADDR_SZ_8K 0x00000010 +#define SCAN_ADDR_SZ_16K 0x00000020 +#define SCAN_ADDR_SZ_SZD 0x00000030 +#define SCAN_ADDR_TYPE 0x000000C0 +#define SCAN_ADDR_TYPE_SLAVE 0x00000000 +#define SCAN_ADDR_TYPE_BRIDGE 0x00000040 +#define SCAN_ADDR_TYPE_SWRAP 0x00000080 +#define SCAN_ADDR_TYPE_MWRAP 0x000000C0 +#define SCAN_ADDR_PORT 0x00000F00 +#define SCAN_ADDR_PORT_SHIFT 8 +#define SCAN_ADDR_ADDR 0xFFFFF000 + +#define SCAN_ADDR_SZ_BASE 0x00001000 /* 4KB */ + +#define SCAN_SIZE_SZ_ALIGN 0x00000FFF +#define SCAN_SIZE_SZ 0xFFFFF000 +#define SCAN_SIZE_SG32 0x00000008 + +#endif /* BCMA_SCAN_H_ */ diff --git a/include/linux/bcma/bcma.h b/include/linux/bcma/bcma.h new file mode 100644 index 0000000..0df6633 --- /dev/null +++ b/include/linux/bcma/bcma.h @@ -0,0 +1,232 @@ +#ifndef LINUX_BCMA_H_ +#define LINUX_BCMA_H_ + +#include +#include + +#include +#include + +#include "bcma_regs.h" + +struct bcma_device; +struct bcma_bus; + +enum bcma_hosttype { + BCMA_HOSTTYPE_NONE, + BCMA_HOSTTYPE_PCI, + BCMA_HOSTTYPE_SDIO, +}; + +struct bcma_chipinfo { + u16 id; + u8 rev; + u8 pkg; +}; + +struct bcma_host_ops { + u8 (*read8)(struct bcma_device *core, u16 offset); + u16 (*read16)(struct bcma_device *core, u16 offset); + u32 (*read32)(struct bcma_device *core, u16 offset); + void (*write8)(struct bcma_device *core, u16 offset, u8 value); + void (*write16)(struct bcma_device *core, u16 offset, u16 value); + void (*write32)(struct bcma_device *core, u16 offset, u32 value); + /* Agent ops */ + u32 (*aread32)(struct bcma_device *core, u16 offset); + void (*awrite32)(struct bcma_device *core, u16 offset, u32 value); +}; + +/* Core manufacturers */ +#define BCMA_MANUF_ARM 0x43B +#define BCMA_MANUF_MIPS 0x4A7 +#define BCMA_MANUF_BCM 0x4BF + +/* Core class values. */ +#define BCMA_CL_SIM 0x0 +#define BCMA_CL_EROM 0x1 +#define BCMA_CL_CORESIGHT 0x9 +#define BCMA_CL_VERIF 0xB +#define BCMA_CL_OPTIMO 0xD +#define BCMA_CL_GEN 0xE +#define BCMA_CL_PRIMECELL 0xF + +/* Core-ID values. */ +#define BCMA_CORE_OOB_ROUTER 0x367 /* Out of band */ +#define BCMA_CORE_INVALID 0x700 +#define BCMA_CORE_CHIPCOMMON 0x800 +#define BCMA_CORE_ILINE20 0x801 +#define BCMA_CORE_SRAM 0x802 +#define BCMA_CORE_SDRAM 0x803 +#define BCMA_CORE_PCI 0x804 +#define BCMA_CORE_MIPS 0x805 +#define BCMA_CORE_ETHERNET 0x806 +#define BCMA_CORE_V90 0x807 +#define BCMA_CORE_USB11_HOSTDEV 0x808 +#define BCMA_CORE_ADSL 0x809 +#define BCMA_CORE_ILINE100 0x80A +#define BCMA_CORE_IPSEC 0x80B +#define BCMA_CORE_UTOPIA 0x80C +#define BCMA_CORE_PCMCIA 0x80D +#define BCMA_CORE_INTERNAL_MEM 0x80E +#define BCMA_CORE_MEMC_SDRAM 0x80F +#define BCMA_CORE_OFDM 0x810 +#define BCMA_CORE_EXTIF 0x811 +#define BCMA_CORE_80211 0x812 +#define BCMA_CORE_PHY_A 0x813 +#define BCMA_CORE_PHY_B 0x814 +#define BCMA_CORE_PHY_G 0x815 +#define BCMA_CORE_MIPS_3302 0x816 +#define BCMA_CORE_USB11_HOST 0x817 +#define BCMA_CORE_USB11_DEV 0x818 +#define BCMA_CORE_USB20_HOST 0x819 +#define BCMA_CORE_USB20_DEV 0x81A +#define BCMA_CORE_SDIO_HOST 0x81B +#define BCMA_CORE_ROBOSWITCH 0x81C +#define BCMA_CORE_PARA_ATA 0x81D +#define BCMA_CORE_SATA_XORDMA 0x81E +#define BCMA_CORE_ETHERNET_GBIT 0x81F +#define BCMA_CORE_PCIE 0x820 +#define BCMA_CORE_PHY_N 0x821 +#define BCMA_CORE_SRAM_CTL 0x822 +#define BCMA_CORE_MINI_MACPHY 0x823 +#define BCMA_CORE_ARM_1176 0x824 +#define BCMA_CORE_ARM_7TDMI 0x825 +#define BCMA_CORE_PHY_LP 0x826 +#define BCMA_CORE_PMU 0x827 +#define BCMA_CORE_PHY_SSN 0x828 +#define BCMA_CORE_SDIO_DEV 0x829 +#define BCMA_CORE_ARM_CM3 0x82A +#define BCMA_CORE_PHY_HT 0x82B +#define BCMA_CORE_MIPS_74K 0x82C +#define BCMA_CORE_MAC_GBIT 0x82D +#define BCMA_CORE_DDR12_MEM_CTL 0x82E +#define BCMA_CORE_PCIE_RC 0x82F /* PCIe Root Complex */ +#define BCMA_CORE_OCP_OCP_BRIDGE 0x830 +#define BCMA_CORE_SHARED_COMMON 0x831 +#define BCMA_CORE_OCP_AHB_BRIDGE 0x832 +#define BCMA_CORE_SPI_HOST 0x833 +#define BCMA_CORE_I2S 0x834 +#define BCMA_CORE_SDR_DDR1_MEM_CTL 0x835 /* SDR/DDR1 memory controller core */ +#define BCMA_CORE_SHIM 0x837 /* SHIM component in ubus/6362 */ +#define BCMA_CORE_DEFAULT 0xFFF + +#define BCMA_MAX_NR_CORES 16 + +/* 1) It is not allowed to put struct device statically in bcma_device + * 2) We can not just use pointer to struct device because we use container_of + * 3) We do not have pointer to struct bcma_device in struct device + * Solution: use such a dummy wrapper + */ +struct __bcma_dev_wrapper { + struct device dev; + struct bcma_device *core; +}; + +struct bcma_device { + struct bcma_bus *bus; + struct bcma_device_id id; + + struct device *dev; + + u8 core_index; + + u32 addr; + u32 wrap; + + void *drvdata; +}; + +static inline void *bcma_get_drvdata(struct bcma_device *core) +{ + return core->drvdata; +} +static inline void bcma_set_drvdata(struct bcma_device *core, void *drvdata) +{ + core->drvdata = drvdata; +} + +struct bcma_driver { + const char *name; + const struct bcma_device_id *id_table; + + int (*probe)(struct bcma_device *dev); + void (*remove)(struct bcma_device *dev); + int (*suspend)(struct bcma_device *dev, pm_message_t state); + int (*resume)(struct bcma_device *dev); + void (*shutdown)(struct bcma_device *dev); + + struct device_driver drv; +}; +extern +int __bcma_driver_register(struct bcma_driver *drv, struct module *owner); +static inline int bcma_driver_register(struct bcma_driver *drv) +{ + return __bcma_driver_register(drv, THIS_MODULE); +} +extern void bcma_driver_unregister(struct bcma_driver *drv); + +struct bcma_bus { + /* The MMIO area. */ + void __iomem *mmio; + + const struct bcma_host_ops *ops; + + enum bcma_hosttype hosttype; + union { + /* Pointer to the PCI bus (only for BCMA_HOSTTYPE_PCI) */ + struct pci_dev *host_pci; + /* Pointer to the SDIO device (only for BCMA_HOSTTYPE_SDIO) */ + struct sdio_func *host_sdio; + }; + + struct bcma_chipinfo chipinfo; + + struct bcma_device *mapped_core; + struct bcma_device cores[BCMA_MAX_NR_CORES]; + u8 nr_cores; + + struct bcma_drv_cc drv_cc; + struct bcma_drv_pci drv_pci; +}; + +extern inline u32 bcma_read8(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read8(core, offset); +} +extern inline u32 bcma_read16(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read16(core, offset); +} +extern inline u32 bcma_read32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->read32(core, offset); +} +extern inline +void bcma_write8(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write8(core, offset, value); +} +extern inline +void bcma_write16(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write16(core, offset, value); +} +extern inline +void bcma_write32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->write32(core, offset, value); +} +extern inline u32 bcma_aread32(struct bcma_device *core, u16 offset) +{ + return core->bus->ops->aread32(core, offset); +} +extern inline +void bcma_awrite32(struct bcma_device *core, u16 offset, u32 value) +{ + core->bus->ops->awrite32(core, offset, value); +} + +extern bool bcma_core_is_enabled(struct bcma_device *core); +extern int bcma_core_enable(struct bcma_device *core, u32 flags); + +#endif /* LINUX_BCMA_H_ */ diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h new file mode 100644 index 0000000..4f8fd6a --- /dev/null +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -0,0 +1,297 @@ +#ifndef LINUX_BCMA_DRIVER_CC_H_ +#define LINUX_BCMA_DRIVER_CC_H_ + +/** ChipCommon core registers. **/ +#define BCMA_CC_ID 0x0000 +#define BCMA_CC_ID_ID 0x0000FFFF +#define BCMA_CC_ID_ID_SHIFT 0 +#define BCMA_CC_ID_REV 0x000F0000 +#define BCMA_CC_ID_REV_SHIFT 16 +#define BCMA_CC_ID_PKG 0x00F00000 +#define BCMA_CC_ID_PKG_SHIFT 20 +#define BCMA_CC_ID_NRCORES 0x0F000000 +#define BCMA_CC_ID_NRCORES_SHIFT 24 +#define BCMA_CC_ID_TYPE 0xF0000000 +#define BCMA_CC_ID_TYPE_SHIFT 28 +#define BCMA_CC_CAP 0x0004 /* Capabilities */ +#define BCMA_CC_CAP_NRUART 0x00000003 /* # of UARTs */ +#define BCMA_CC_CAP_MIPSEB 0x00000004 /* MIPS in BigEndian Mode */ +#define BCMA_CC_CAP_UARTCLK 0x00000018 /* UART clock select */ +#define BCMA_CC_CAP_UARTCLK_INT 0x00000008 /* UARTs are driven by internal divided clock */ +#define BCMA_CC_CAP_UARTGPIO 0x00000020 /* UARTs on GPIO 15-12 */ +#define BCMA_CC_CAP_EXTBUS 0x000000C0 /* External buses present */ +#define BCMA_CC_CAP_FLASHT 0x00000700 /* Flash Type */ +#define BCMA_CC_FLASHT_NONE 0x00000000 /* No flash */ +#define BCMA_CC_FLASHT_STSER 0x00000100 /* ST serial flash */ +#define BCMA_CC_FLASHT_ATSER 0x00000200 /* Atmel serial flash */ +#define BCMA_CC_FLASHT_PARA 0x00000700 /* Parallel flash */ +#define BCMA_CC_CAP_PLLT 0x00038000 /* PLL Type */ +#define BCMA_PLLTYPE_NONE 0x00000000 +#define BCMA_PLLTYPE_1 0x00010000 /* 48Mhz base, 3 dividers */ +#define BCMA_PLLTYPE_2 0x00020000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_3 0x00030000 /* 25Mhz, 2 dividers */ +#define BCMA_PLLTYPE_4 0x00008000 /* 48Mhz, 4 dividers */ +#define BCMA_PLLTYPE_5 0x00018000 /* 25Mhz, 4 dividers */ +#define BCMA_PLLTYPE_6 0x00028000 /* 100/200 or 120/240 only */ +#define BCMA_PLLTYPE_7 0x00038000 /* 25Mhz, 4 dividers */ +#define BCMA_CC_CAP_PCTL 0x00040000 /* Power Control */ +#define BCMA_CC_CAP_OTPS 0x00380000 /* OTP size */ +#define BCMA_CC_CAP_OTPS_SHIFT 19 +#define BCMA_CC_CAP_OTPS_BASE 5 +#define BCMA_CC_CAP_JTAGM 0x00400000 /* JTAG master present */ +#define BCMA_CC_CAP_BROM 0x00800000 /* Internal boot ROM active */ +#define BCMA_CC_CAP_64BIT 0x08000000 /* 64-bit Backplane */ +#define BCMA_CC_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ +#define BCMA_CC_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ +#define BCMA_CC_CAP_SPROM 0x40000000 /* SPROM present */ +#define BCMA_CC_CORECTL 0x0008 +#define BCMA_CC_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ +#define BCMA_CC_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +#define BCMA_CC_CORECTL_UARTCLKEN 0x00000008 /* UART clock enable (rev >= 21) */ +#define BCMA_CC_BIST 0x000C +#define BCMA_CC_OTPS 0x0010 /* OTP status */ +#define BCMA_CC_OTPS_PROGFAIL 0x80000000 +#define BCMA_CC_OTPS_PROTECT 0x00000007 +#define BCMA_CC_OTPS_HW_PROTECT 0x00000001 +#define BCMA_CC_OTPS_SW_PROTECT 0x00000002 +#define BCMA_CC_OTPS_CID_PROTECT 0x00000004 +#define BCMA_CC_OTPC 0x0014 /* OTP control */ +#define BCMA_CC_OTPC_RECWAIT 0xFF000000 +#define BCMA_CC_OTPC_PROGWAIT 0x00FFFF00 +#define BCMA_CC_OTPC_PRW_SHIFT 8 +#define BCMA_CC_OTPC_MAXFAIL 0x00000038 +#define BCMA_CC_OTPC_VSEL 0x00000006 +#define BCMA_CC_OTPC_SELVL 0x00000001 +#define BCMA_CC_OTPP 0x0018 /* OTP prog */ +#define BCMA_CC_OTPP_COL 0x000000FF +#define BCMA_CC_OTPP_ROW 0x0000FF00 +#define BCMA_CC_OTPP_ROW_SHIFT 8 +#define BCMA_CC_OTPP_READERR 0x10000000 +#define BCMA_CC_OTPP_VALUE 0x20000000 +#define BCMA_CC_OTPP_READ 0x40000000 +#define BCMA_CC_OTPP_START 0x80000000 +#define BCMA_CC_OTPP_BUSY 0x80000000 +#define BCMA_CC_IRQSTAT 0x0020 +#define BCMA_CC_IRQMASK 0x0024 +#define BCMA_CC_IRQ_GPIO 0x00000001 /* gpio intr */ +#define BCMA_CC_IRQ_EXT 0x00000002 /* ro: ext intr pin (corerev >= 3) */ +#define BCMA_CC_IRQ_WDRESET 0x80000000 /* watchdog reset occurred */ +#define BCMA_CC_CHIPCTL 0x0028 /* Rev >= 11 only */ +#define BCMA_CC_CHIPSTAT 0x002C /* Rev >= 11 only */ +#define BCMA_CC_JCMD 0x0030 /* Rev >= 10 only */ +#define BCMA_CC_JCMD_START 0x80000000 +#define BCMA_CC_JCMD_BUSY 0x80000000 +#define BCMA_CC_JCMD_PAUSE 0x40000000 +#define BCMA_CC_JCMD0_ACC_MASK 0x0000F000 +#define BCMA_CC_JCMD0_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD0_ACC_DR 0x00001000 +#define BCMA_CC_JCMD0_ACC_IR 0x00002000 +#define BCMA_CC_JCMD0_ACC_RESET 0x00003000 +#define BCMA_CC_JCMD0_ACC_IRPDR 0x00004000 +#define BCMA_CC_JCMD0_ACC_PDR 0x00005000 +#define BCMA_CC_JCMD0_IRW_MASK 0x00000F00 +#define BCMA_CC_JCMD_ACC_MASK 0x000F0000 /* Changes for corerev 11 */ +#define BCMA_CC_JCMD_ACC_IRDR 0x00000000 +#define BCMA_CC_JCMD_ACC_DR 0x00010000 +#define BCMA_CC_JCMD_ACC_IR 0x00020000 +#define BCMA_CC_JCMD_ACC_RESET 0x00030000 +#define BCMA_CC_JCMD_ACC_IRPDR 0x00040000 +#define BCMA_CC_JCMD_ACC_PDR 0x00050000 +#define BCMA_CC_JCMD_IRW_MASK 0x00001F00 +#define BCMA_CC_JCMD_IRW_SHIFT 8 +#define BCMA_CC_JCMD_DRW_MASK 0x0000003F +#define BCMA_CC_JIR 0x0034 /* Rev >= 10 only */ +#define BCMA_CC_JDR 0x0038 /* Rev >= 10 only */ +#define BCMA_CC_JCTL 0x003C /* Rev >= 10 only */ +#define BCMA_CC_JCTL_FORCE_CLK 4 /* Force clock */ +#define BCMA_CC_JCTL_EXT_EN 2 /* Enable external targets */ +#define BCMA_CC_JCTL_EN 1 /* Enable Jtag master */ +#define BCMA_CC_FLASHCTL 0x0040 +#define BCMA_CC_FLASHCTL_START 0x80000000 +#define BCMA_CC_FLASHCTL_BUSY BCMA_CC_FLASHCTL_START +#define BCMA_CC_FLASHADDR 0x0044 +#define BCMA_CC_FLASHDATA 0x0048 +#define BCMA_CC_BCAST_ADDR 0x0050 +#define BCMA_CC_BCAST_DATA 0x0054 +#define BCMA_CC_GPIOIN 0x0060 +#define BCMA_CC_GPIOOUT 0x0064 +#define BCMA_CC_GPIOOUTEN 0x0068 +#define BCMA_CC_GPIOCTL 0x006C +#define BCMA_CC_GPIOPOL 0x0070 +#define BCMA_CC_GPIOIRQ 0x0074 +#define BCMA_CC_WATCHDOG 0x0080 +#define BCMA_CC_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ +#define BCMA_CC_GPIOTIMER_ONTIME_SHIFT 16 +#define BCMA_CC_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ +#define BCMA_CC_CLOCK_N 0x0090 +#define BCMA_CC_CLOCK_SB 0x0094 +#define BCMA_CC_CLOCK_PCI 0x0098 +#define BCMA_CC_CLOCK_M2 0x009C +#define BCMA_CC_CLOCK_MIPS 0x00A0 +#define BCMA_CC_CLKDIV 0x00A4 /* Rev >= 3 only */ +#define BCMA_CC_CLKDIV_SFLASH 0x0F000000 +#define BCMA_CC_CLKDIV_SFLASH_SHIFT 24 +#define BCMA_CC_CLKDIV_OTP 0x000F0000 +#define BCMA_CC_CLKDIV_OTP_SHIFT 16 +#define BCMA_CC_CLKDIV_JTAG 0x00000F00 +#define BCMA_CC_CLKDIV_JTAG_SHIFT 8 +#define BCMA_CC_CLKDIV_UART 0x000000FF +#define BCMA_CC_CAP_EXT 0x00AC /* Capabilities */ +#define BCMA_CC_PLLONDELAY 0x00B0 /* Rev >= 4 only */ +#define BCMA_CC_FREFSELDELAY 0x00B4 /* Rev >= 4 only */ +#define BCMA_CC_SLOWCLKCTL 0x00B8 /* 6 <= Rev <= 9 only */ +#define BCMA_CC_SLOWCLKCTL_SRC 0x00000007 /* slow clock source mask */ +#define BCMA_CC_SLOWCLKCTL_SRC_LPO 0x00000000 /* source of slow clock is LPO */ +#define BCMA_CC_SLOWCLKCTL_SRC_XTAL 0x00000001 /* source of slow clock is crystal */ +#define BCMA_CC_SLOECLKCTL_SRC_PCI 0x00000002 /* source of slow clock is PCI */ +#define BCMA_CC_SLOWCLKCTL_LPOFREQ 0x00000200 /* LPOFreqSel, 1: 160Khz, 0: 32KHz */ +#define BCMA_CC_SLOWCLKCTL_LPOPD 0x00000400 /* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */ +#define BCMA_CC_SLOWCLKCTL_FSLOW 0x00000800 /* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */ +#define BCMA_CC_SLOWCLKCTL_IPLL 0x00001000 /* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */ +#define BCMA_CC_SLOWCLKCTL_ENXTAL 0x00002000 /* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */ +#define BCMA_CC_SLOWCLKCTL_XTALPU 0x00004000 /* XtalPU (RO), 1/0: crystal running/disabled */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV 0xFFFF0000 /* ClockDivider (SlowClk = 1/(4+divisor)) */ +#define BCMA_CC_SLOWCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_SYSCLKCTL 0x00C0 /* Rev >= 3 only */ +#define BCMA_CC_SYSCLKCTL_IDLPEN 0x00000001 /* ILPen: Enable Idle Low Power */ +#define BCMA_CC_SYSCLKCTL_ALPEN 0x00000002 /* ALPen: Enable Active Low Power */ +#define BCMA_CC_SYSCLKCTL_PLLEN 0x00000004 /* ForcePLLOn */ +#define BCMA_CC_SYSCLKCTL_FORCEALP 0x00000008 /* Force ALP (or HT if ALPen is not set */ +#define BCMA_CC_SYSCLKCTL_FORCEHT 0x00000010 /* Force HT */ +#define BCMA_CC_SYSCLKCTL_CLKDIV 0xFFFF0000 /* ClkDiv (ILP = 1/(4+divisor)) */ +#define BCMA_CC_SYSCLKCTL_CLKDIV_SHIFT 16 +#define BCMA_CC_CLKSTSTR 0x00C4 /* Rev >= 3 only */ +#define BCMA_CC_EROM 0x00FC +#define BCMA_CC_PCMCIA_CFG 0x0100 +#define BCMA_CC_PCMCIA_MEMWAIT 0x0104 +#define BCMA_CC_PCMCIA_ATTRWAIT 0x0108 +#define BCMA_CC_PCMCIA_IOWAIT 0x010C +#define BCMA_CC_IDE_CFG 0x0110 +#define BCMA_CC_IDE_MEMWAIT 0x0114 +#define BCMA_CC_IDE_ATTRWAIT 0x0118 +#define BCMA_CC_IDE_IOWAIT 0x011C +#define BCMA_CC_PROG_CFG 0x0120 +#define BCMA_CC_PROG_WAITCNT 0x0124 +#define BCMA_CC_FLASH_CFG 0x0128 +#define BCMA_CC_FLASH_WAITCNT 0x012C +#define BCMA_CC_CLKCTLST 0x01E0 /* Clock control and status (rev >= 20) */ +#define BCMA_CC_CLKCTLST_FORCEALP 0x00000001 /* Force ALP request */ +#define BCMA_CC_CLKCTLST_FORCEHT 0x00000002 /* Force HT request */ +#define BCMA_CC_CLKCTLST_FORCEILP 0x00000004 /* Force ILP request */ +#define BCMA_CC_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ +#define BCMA_CC_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ +#define BCMA_CC_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +#define BCMA_CC_CLKCTLST_HAVEHT 0x00010000 /* HT available */ +#define BCMA_CC_CLKCTLST_HAVEALP 0x00020000 /* APL available */ +#define BCMA_CC_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ +#define BCMA_CC_UART0_DATA 0x0300 +#define BCMA_CC_UART0_IMR 0x0304 +#define BCMA_CC_UART0_FCR 0x0308 +#define BCMA_CC_UART0_LCR 0x030C +#define BCMA_CC_UART0_MCR 0x0310 +#define BCMA_CC_UART0_LSR 0x0314 +#define BCMA_CC_UART0_MSR 0x0318 +#define BCMA_CC_UART0_SCRATCH 0x031C +#define BCMA_CC_UART1_DATA 0x0400 +#define BCMA_CC_UART1_IMR 0x0404 +#define BCMA_CC_UART1_FCR 0x0408 +#define BCMA_CC_UART1_LCR 0x040C +#define BCMA_CC_UART1_MCR 0x0410 +#define BCMA_CC_UART1_LSR 0x0414 +#define BCMA_CC_UART1_MSR 0x0418 +#define BCMA_CC_UART1_SCRATCH 0x041C +/* PMU registers (rev >= 20) */ +#define BCMA_CC_PMU_CTL 0x0600 /* PMU control */ +#define BCMA_CC_PMU_CTL_ILP_DIV 0xFFFF0000 /* ILP div mask */ +#define BCMA_CC_PMU_CTL_ILP_DIV_SHIFT 16 +#define BCMA_CC_PMU_CTL_NOILPONW 0x00000200 /* No ILP on wait */ +#define BCMA_CC_PMU_CTL_HTREQEN 0x00000100 /* HT req enable */ +#define BCMA_CC_PMU_CTL_ALPREQEN 0x00000080 /* ALP req enable */ +#define BCMA_CC_PMU_CTL_XTALFREQ 0x0000007C /* Crystal freq */ +#define BCMA_CC_PMU_CTL_XTALFREQ_SHIFT 2 +#define BCMA_CC_PMU_CTL_ILPDIVEN 0x00000002 /* ILP div enable */ +#define BCMA_CC_PMU_CTL_LPOSEL 0x00000001 /* LPO sel */ +#define BCMA_CC_PMU_CAP 0x0604 /* PMU capabilities */ +#define BCMA_CC_PMU_CAP_REVISION 0x000000FF /* Revision mask */ +#define BCMA_CC_PMU_STAT 0x0608 /* PMU status */ +#define BCMA_CC_PMU_STAT_INTPEND 0x00000040 /* Interrupt pending */ +#define BCMA_CC_PMU_STAT_SBCLKST 0x00000030 /* Backplane clock status? */ +#define BCMA_CC_PMU_STAT_HAVEALP 0x00000008 /* ALP available */ +#define BCMA_CC_PMU_STAT_HAVEHT 0x00000004 /* HT available */ +#define BCMA_CC_PMU_STAT_RESINIT 0x00000003 /* Res init */ +#define BCMA_CC_PMU_RES_STAT 0x060C /* PMU res status */ +#define BCMA_CC_PMU_RES_PEND 0x0610 /* PMU res pending */ +#define BCMA_CC_PMU_TIMER 0x0614 /* PMU timer */ +#define BCMA_CC_PMU_MINRES_MSK 0x0618 /* PMU min res mask */ +#define BCMA_CC_PMU_MAXRES_MSK 0x061C /* PMU max res mask */ +#define BCMA_CC_PMU_RES_TABSEL 0x0620 /* PMU res table sel */ +#define BCMA_CC_PMU_RES_DEPMSK 0x0624 /* PMU res dep mask */ +#define BCMA_CC_PMU_RES_UPDNTM 0x0628 /* PMU res updown timer */ +#define BCMA_CC_PMU_RES_TIMER 0x062C /* PMU res timer */ +#define BCMA_CC_PMU_CLKSTRETCH 0x0630 /* PMU clockstretch */ +#define BCMA_CC_PMU_WATCHDOG 0x0634 /* PMU watchdog */ +#define BCMA_CC_PMU_RES_REQTS 0x0640 /* PMU res req timer sel */ +#define BCMA_CC_PMU_RES_REQT 0x0644 /* PMU res req timer */ +#define BCMA_CC_PMU_RES_REQM 0x0648 /* PMU res req mask */ +#define BCMA_CC_CHIPCTL_ADDR 0x0650 +#define BCMA_CC_CHIPCTL_DATA 0x0654 +#define BCMA_CC_REGCTL_ADDR 0x0658 +#define BCMA_CC_REGCTL_DATA 0x065C +#define BCMA_CC_PLLCTL_ADDR 0x0660 +#define BCMA_CC_PLLCTL_DATA 0x0664 + +/* Data for the PMU, if available. + * Check availability with ((struct bcma_chipcommon)->capabilities & BCMA_CC_CAP_PMU) + */ +struct bcma_chipcommon_pmu { + u8 rev; /* PMU revision */ + u32 crystalfreq; /* The active crystal frequency (in kHz) */ +}; + +struct bcma_drv_cc { + struct bcma_device *core; + u32 status; + u32 capabilities; + u32 capabilities_ext; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct bcma_chipcommon_pmu pmu; +}; + +/* Register access */ +#define bcma_cc_read32(cc, offset) \ + bcma_read32((cc)->core, offset) +#define bcma_cc_write32(cc, offset, val) \ + bcma_write32((cc)->core, offset, val) + +#define bcma_cc_mask32(cc, offset, mask) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) & (mask)) +#define bcma_cc_set32(cc, offset, set) \ + bcma_cc_write32(cc, offset, bcma_cc_read32(cc, offset) | (set)) +#define bcma_cc_maskset32(cc, offset, mask, set) \ + bcma_cc_write32(cc, offset, (bcma_cc_read32(cc, offset) & (mask)) | (set)) + +extern void bcma_core_chipcommon_init(struct bcma_drv_cc *cc); + +extern void bcma_chipco_suspend(struct bcma_drv_cc *cc); +extern void bcma_chipco_resume(struct bcma_drv_cc *cc); + +extern void bcma_chipco_watchdog_timer_set(struct bcma_drv_cc *cc, + u32 ticks); + +void bcma_chipco_irq_mask(struct bcma_drv_cc *cc, u32 mask, u32 value); + +u32 bcma_chipco_irq_status(struct bcma_drv_cc *cc, u32 mask); + +/* Chipcommon GPIO pin access. */ +u32 bcma_chipco_gpio_in(struct bcma_drv_cc *cc, u32 mask); +u32 bcma_chipco_gpio_out(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_outen(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_control(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_intmask(struct bcma_drv_cc *cc, u32 mask, u32 value); +u32 bcma_chipco_gpio_polarity(struct bcma_drv_cc *cc, u32 mask, u32 value); + +/* PMU support */ +extern void bcma_pmu_init(struct bcma_drv_cc *cc); + +#endif /* LINUX_BCMA_DRIVER_CC_H_ */ diff --git a/include/linux/bcma/bcma_driver_pci.h b/include/linux/bcma/bcma_driver_pci.h new file mode 100644 index 0000000..b7e191c --- /dev/null +++ b/include/linux/bcma/bcma_driver_pci.h @@ -0,0 +1,89 @@ +#ifndef LINUX_BCMA_DRIVER_PCI_H_ +#define LINUX_BCMA_DRIVER_PCI_H_ + +#include + +struct pci_dev; + +/** PCI core registers. **/ +#define BCMA_CORE_PCI_CTL 0x0000 /* PCI Control */ +#define BCMA_CORE_PCI_CTL_RST_OE 0x00000001 /* PCI_RESET Output Enable */ +#define BCMA_CORE_PCI_CTL_RST 0x00000002 /* PCI_RESET driven out to pin */ +#define BCMA_CORE_PCI_CTL_CLK_OE 0x00000004 /* Clock gate Output Enable */ +#define BCMA_CORE_PCI_CTL_CLK 0x00000008 /* Gate for clock driven out to pin */ +#define BCMA_CORE_PCI_ARBCTL 0x0010 /* PCI Arbiter Control */ +#define BCMA_CORE_PCI_ARBCTL_INTERN 0x00000001 /* Use internal arbiter */ +#define BCMA_CORE_PCI_ARBCTL_EXTERN 0x00000002 /* Use external arbiter */ +#define BCMA_CORE_PCI_ARBCTL_PARKID 0x00000006 /* Mask, selects which agent is parked on an idle bus */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_LAST 0x00000000 /* Last requestor */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_4710 0x00000002 /* 4710 */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT0 0x00000004 /* External requestor 0 */ +#define BCMA_CORE_PCI_ARBCTL_PARKID_EXT1 0x00000006 /* External requestor 1 */ +#define BCMA_CORE_PCI_ISTAT 0x0020 /* Interrupt status */ +#define BCMA_CORE_PCI_ISTAT_INTA 0x00000001 /* PCI INTA# */ +#define BCMA_CORE_PCI_ISTAT_INTB 0x00000002 /* PCI INTB# */ +#define BCMA_CORE_PCI_ISTAT_SERR 0x00000004 /* PCI SERR# (write to clear) */ +#define BCMA_CORE_PCI_ISTAT_PERR 0x00000008 /* PCI PERR# (write to clear) */ +#define BCMA_CORE_PCI_ISTAT_PME 0x00000010 /* PCI PME# */ +#define BCMA_CORE_PCI_IMASK 0x0024 /* Interrupt mask */ +#define BCMA_CORE_PCI_IMASK_INTA 0x00000001 /* PCI INTA# */ +#define BCMA_CORE_PCI_IMASK_INTB 0x00000002 /* PCI INTB# */ +#define BCMA_CORE_PCI_IMASK_SERR 0x00000004 /* PCI SERR# */ +#define BCMA_CORE_PCI_IMASK_PERR 0x00000008 /* PCI PERR# */ +#define BCMA_CORE_PCI_IMASK_PME 0x00000010 /* PCI PME# */ +#define BCMA_CORE_PCI_MBOX 0x0028 /* Backplane to PCI Mailbox */ +#define BCMA_CORE_PCI_MBOX_F0_0 0x00000100 /* PCI function 0, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F0_1 0x00000200 /* PCI function 0, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F1_0 0x00000400 /* PCI function 1, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F1_1 0x00000800 /* PCI function 1, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F2_0 0x00001000 /* PCI function 2, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F2_1 0x00002000 /* PCI function 2, INT 1 */ +#define BCMA_CORE_PCI_MBOX_F3_0 0x00004000 /* PCI function 3, INT 0 */ +#define BCMA_CORE_PCI_MBOX_F3_1 0x00008000 /* PCI function 3, INT 1 */ +#define BCMA_CORE_PCI_BCAST_ADDR 0x0050 /* Backplane Broadcast Address */ +#define BCMA_CORE_PCI_BCAST_ADDR_MASK 0x000000FF +#define BCMA_CORE_PCI_BCAST_DATA 0x0054 /* Backplane Broadcast Data */ +#define BCMA_CORE_PCI_GPIO_IN 0x0060 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_OUT 0x0064 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_ENABLE 0x0068 /* rev >= 2 only */ +#define BCMA_CORE_PCI_GPIO_CTL 0x006C /* rev >= 2 only */ +#define BCMA_CORE_PCI_SBTOPCI0 0x0100 /* Backplane to PCI translation 0 (sbtopci0) */ +#define BCMA_CORE_PCI_SBTOPCI0_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI1 0x0104 /* Backplane to PCI translation 1 (sbtopci1) */ +#define BCMA_CORE_PCI_SBTOPCI1_MASK 0xFC000000 +#define BCMA_CORE_PCI_SBTOPCI2 0x0108 /* Backplane to PCI translation 2 (sbtopci2) */ +#define BCMA_CORE_PCI_SBTOPCI2_MASK 0xC0000000 +#define BCMA_CORE_PCI_PCICFG0 0x0400 /* PCI config space 0 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG1 0x0500 /* PCI config space 1 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG2 0x0600 /* PCI config space 2 (rev >= 8) */ +#define BCMA_CORE_PCI_PCICFG3 0x0700 /* PCI config space 3 (rev >= 8) */ +#define BCMA_CORE_PCI_SPROM(wordoffset) (0x0800 + ((wordoffset) * 2)) /* SPROM shadow area (72 bytes) */ + +/* SBtoPCIx */ +#define BCMA_CORE_PCI_SBTOPCI_MEM 0x00000000 +#define BCMA_CORE_PCI_SBTOPCI_IO 0x00000001 +#define BCMA_CORE_PCI_SBTOPCI_CFG0 0x00000002 +#define BCMA_CORE_PCI_SBTOPCI_CFG1 0x00000003 +#define BCMA_CORE_PCI_SBTOPCI_PREF 0x00000004 /* Prefetch enable */ +#define BCMA_CORE_PCI_SBTOPCI_BURST 0x00000008 /* Burst enable */ +#define BCMA_CORE_PCI_SBTOPCI_MRM 0x00000020 /* Memory Read Multiple */ +#define BCMA_CORE_PCI_SBTOPCI_RC 0x00000030 /* Read Command mask (rev >= 11) */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READ 0x00000000 /* Memory read */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READL 0x00000010 /* Memory read line */ +#define BCMA_CORE_PCI_SBTOPCI_RC_READM 0x00000020 /* Memory read multiple */ + +/* PCIcore specific boardflags */ +#define BCMA_CORE_PCI_BFL_NOPCI 0x00000400 /* Board leaves PCI floating */ + +struct bcma_drv_pci { + struct bcma_device *core; + u8 setup_done:1; +}; + +/* Register access */ +#define pcicore_read32(pc, offset) bcma_read32((pc)->core, offset) +#define pcicore_write32(pc, offset, val) bcma_write32((pc)->core, offset, val) + +extern void bcma_core_pci_init(struct bcma_drv_pci *pc); + +#endif /* LINUX_BCMA_DRIVER_PCI_H_ */ diff --git a/include/linux/bcma/bcma_regs.h b/include/linux/bcma/bcma_regs.h new file mode 100644 index 0000000..f82d88a --- /dev/null +++ b/include/linux/bcma/bcma_regs.h @@ -0,0 +1,34 @@ +#ifndef LINUX_BCMA_REGS_H_ +#define LINUX_BCMA_REGS_H_ + +/* Agent registers (common for every core) */ +#define BCMA_IOCTL 0x0408 +#define BCMA_IOCTL_CLK 0x0001 +#define BCMA_IOCTL_FGC 0x0002 +#define BCMA_IOCTL_CORE_BITS 0x3FFC +#define BCMA_IOCTL_PME_EN 0x4000 +#define BCMA_IOCTL_BIST_EN 0x8000 +#define BCMA_RESET_CTL 0x0800 +#define BCMA_RESET_CTL_RESET 0x0001 + +/* BCMA PCI config space registers. */ +#define BCMA_PCI_PMCSR 0x44 +#define BCMA_PCI_PE 0x100 +#define BCMA_PCI_BAR0_WIN 0x80 /* Backplane address space 0 */ +#define BCMA_PCI_BAR1_WIN 0x84 /* Backplane address space 1 */ +#define BCMA_PCI_SPROMCTL 0x88 /* SPROM control */ +#define BCMA_PCI_SPROMCTL_WE 0x10 /* SPROM write enable */ +#define BCMA_PCI_BAR1_CONTROL 0x8c /* Address space 1 burst control */ +#define BCMA_PCI_IRQS 0x90 /* PCI interrupts */ +#define BCMA_PCI_IRQMASK 0x94 /* PCI IRQ control and mask (pcirev >= 6 only) */ +#define BCMA_PCI_BACKPLANE_IRQS 0x98 /* Backplane Interrupts */ +#define BCMA_PCI_BAR0_WIN2 0xAC +#define BCMA_PCI_GPIO_IN 0xB0 /* GPIO Input (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_OUT 0xB4 /* GPIO Output (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_OUT_ENABLE 0xB8 /* GPIO Output Enable/Disable (pcirev >= 3 only) */ +#define BCMA_PCI_GPIO_SCS 0x10 /* PCI config space bit 4 for 4306c0 slow clock source */ +#define BCMA_PCI_GPIO_HWRAD 0x20 /* PCI config space GPIO 13 for hw radio disable */ +#define BCMA_PCI_GPIO_XTAL 0x40 /* PCI config space GPIO 14 for Xtal powerup */ +#define BCMA_PCI_GPIO_PLL 0x80 /* PCI config space GPIO 15 for PLL powerdown */ + +#endif /* LINUX_BCMA_REGS_H_ */ diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 48c007d..ae28e93 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -382,6 +382,23 @@ struct ssb_device_id { #define SSB_ANY_ID 0xFFFF #define SSB_ANY_REV 0xFF +/* Broadcom's specific AMBA core, see drivers/bcma/ */ +struct bcma_device_id { + __u16 manuf; + __u16 id; + __u8 rev; + __u8 class; +}; +#define BCMA_CORE(_manuf, _id, _rev, _class) \ + { .manuf = _manuf, .id = _id, .rev = _rev, .class = _class, } +#define BCMA_CORETABLE_END \ + { 0, }, + +#define BCMA_ANY_MANUF 0xFFFF +#define BCMA_ANY_ID 0xFFFF +#define BCMA_ANY_REV 0xFF +#define BCMA_ANY_CLASS 0xFF + struct virtio_device_id { __u32 device; __u32 vendor; diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index 88f3f07..e26e2fb 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -702,6 +702,24 @@ static int do_ssb_entry(const char *filename, return 1; } +/* Looks like: bcma:mNidNrevNclN. */ +static int do_bcma_entry(const char *filename, + struct bcma_device_id *id, char *alias) +{ + id->manuf = TO_NATIVE(id->manuf); + id->id = TO_NATIVE(id->id); + id->rev = TO_NATIVE(id->rev); + id->class = TO_NATIVE(id->class); + + strcpy(alias, "bcma:"); + ADD(alias, "m", id->manuf != BCMA_ANY_MANUF, id->manuf); + ADD(alias, "id", id->id != BCMA_ANY_ID, id->id); + ADD(alias, "rev", id->rev != BCMA_ANY_REV, id->rev); + ADD(alias, "cl", id->class != BCMA_ANY_CLASS, id->class); + add_wildcard(alias); + return 1; +} + /* Looks like: virtio:dNvN */ static int do_virtio_entry(const char *filename, struct virtio_device_id *id, char *alias) @@ -968,6 +986,10 @@ void handle_moddevtable(struct module *mod, struct elf_info *info, do_table(symval, sym->st_size, sizeof(struct ssb_device_id), "ssb", do_ssb_entry, mod); + else if (sym_is(symname, "__mod_bcma_device_table")) + do_table(symval, sym->st_size, + sizeof(struct bcma_device_id), "bcma", + do_bcma_entry, mod); else if (sym_is(symname, "__mod_virtio_device_table")) do_table(symval, sym->st_size, sizeof(struct virtio_device_id), "virtio",