| [v2,3/6] ARM: mach-imx/mx27_3ds: Add LCD support |
2011-06-22 |
Fabio Estevam |
|
New |
| [v2,3/6] ARM: mxc: change imx-dma default to_version to 1 |
2011-06-22 |
Shawn Guo |
|
New |
| [v2,3/6] ARM: mxs: add usb clocks to clock tree |
2011-07-25 |
Tony Lin |
|
New |
| [v2,3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src |
2011-09-15 |
Shawn Guo |
|
New |
| [v2,3/7] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ() |
2012-02-15 |
Shawn Guo |
|
New |
| [v2,3/7] ARM: mxs: convert m28evk board to device tree |
2012-07-10 |
Shawn Guo |
|
New |
| [v2,3/7] ARM: mxs: convert m28evk board to device tree |
2012-07-10 |
Shawn Guo |
|
New |
| [v2,3/7] arm: sunxi: use the right clock phandles for UARTs |
2013-03-27 |
Emilio López |
|
New |
| [v2,3/7] spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro |
2011-07-09 |
Shawn Guo |
|
New |
| [v2,3/8] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC) |
2013-02-13 |
Philipp Zabel |
|
New |
| [v2,3/8] ARM: OMAP2+: hwmod: reorganize and document the setup process |
2012-02-28 |
Paul Walmsley |
|
New |
| [v2,30/34] ARM: imx: move debug macros to include/debug |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,31/34] ARM: imx: include hardware.h rather than mach/hardware.h |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,32/34] ARM: imx: remove header file mach/irqs.h |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,33/34] ARM: imx: call mxc_device_init() in soc specific function |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,34/34] ARM: imx: enable multi-platform build |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,4/4,RESEND] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5 |
2011-06-17 |
Shawn Guo |
|
New |
| [v2,4/4] ARM: i.MX5x CSPI: Fixed clock name for CSPI |
2012-07-12 |
Alexander Shiyan |
|
New |
| [v2,4/4] ARM: imx6q: support WAIT mode using cpuidle |
2012-12-04 |
Shawn Guo |
|
New |
| [v2,4/4] ARM: imx_v6_v7_defconfig: enable parallel display |
2013-04-09 |
Rogerio Pimentel |
|
New |
| [v2,4/4] ARM: mx53_ard: Add flexcan support |
2011-09-09 |
Rogerio Pimentel |
|
New |
| [v2,4/4] ARM: mxc: remove plat-mxc/gpio driver |
2011-06-02 |
Shawn Guo |
|
New |
| [v2,4/4] ARM: mxs: remove unneeded enet_out clk initialization |
2013-03-18 |
Shawn Guo |
|
New |
| [v2,4/4] ARM: remove empty disable_fiq and arch_ret_to_user macros |
2012-02-09 |
Rob Herring |
|
New |
| [v2,4/4] OMAP: powerdomain: remove omap_chip bitmasks |
2011-09-14 |
Paul Walmsley |
|
New |
| [v2,4/4] i.MX27: visstrim_m10: Add video support. |
2012-02-28 |
Javier Martin |
|
New |
| [v2,4/4] irqchip: gic: Perform the gic_secondary_init() call via CPU notifier |
2013-01-29 |
Catalin Marinas |
|
New |
| [v2,4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5 |
2011-06-14 |
Shawn Guo |
|
New |
| [v2,4/4] mmc: sdhci-esdhc-imx: extend card_detect and write_protect support for mx5 |
2011-06-15 |
Shawn Guo |
|
New |
| [v2,4/5] ARM: ep93xx: fix inverted RTS/DTR signals on uart1 |
2011-06-12 |
Petr Štetiar |
|
New |
| [v2,4/5] ARM: imx5 DT init cpufreq-cpu0 device |
2013-03-27 |
Markus Pargmann |
|
New |
| [v2,4/5] ARM: mxs: do not add dma device by default |
2012-04-20 |
Dong Aisheng |
|
New |
| [v2,4/5] ARM: mxs: do not add dma device by default |
2012-05-04 |
Dong Aisheng |
|
New |
| [v2,4/5] Cortex-M3: Add base support for Cortex-M3 |
2012-03-05 |
Uwe Kleine-König |
|
New |
| [v2,4/6] ARM: mach-imx/mx27_3ds: Add touchscreen support |
2011-06-22 |
Fabio Estevam |
|
New |
| [v2,4/6] ARM: mxc: imx-dma on imx25 has no other TO version but TO1 |
2011-06-22 |
Shawn Guo |
|
New |
| [v2,4/6] ARM: mxs: make ehci-mxc more flexible to be used on different platforms |
2011-07-25 |
Tony Lin |
|
New |
| [v2,4/6] arm/imx6q: add smp and cpu hotplug support |
2011-09-15 |
Shawn Guo |
|
New |
| [v2,4/7] ARM: imx: eliminate macro IOMUX_TO_IRQ() |
2012-02-15 |
Shawn Guo |
|
New |
| [v2,4/7] ARM: mxs: convert apx4devkit board to device tree |
2012-07-10 |
Shawn Guo |
|
New |
| [v2,4/7] pinctrl: sunxi: add clock support |
2013-03-27 |
Emilio López |
|
New |
| [v2,4/7] spi/imx: merge type SPI_IMX_VER_0_7 into SPI_IMX_VER_0_4 |
2011-07-09 |
Shawn Guo |
|
New |
| [v2,4/8] ARM: OMAP2+: hwmod: revise hardreset behavior |
2012-02-28 |
Paul Walmsley |
|
New |
| [v2,4/8] ARM: mxs: request clock for timer |
2012-04-28 |
Shawn Guo |
|
New |
| [v2,4/8] arm/mxc: remove gpio_to_irq() from mach/gpio.h |
2011-08-13 |
Shawn Guo |
|
New |
| [v2,4/9] iram_alloc: store the virt and phys mem address in gen_pool chunks |
2012-08-31 |
Philipp Zabel |
|
New |
| [v2,5/5] ARM: ep93xx: ts72xx: fix board model detection |
2011-06-12 |
Petr Štetiar |
|
New |
| [v2,5/5] ARM: imx: Remove cpufreq driver |
2013-03-27 |
Markus Pargmann |
|
New |
| [v2,5/5] ARM: mx28evk: add mxs-dma dt support |
2012-05-04 |
Dong Aisheng |
|
New |
| [v2,5/5] ARM: mx5: add basic device tree support for imx51 babbage |
2011-06-24 |
Shawn Guo |
|
New |
| [v2,5/5] Cortex-M3: Add support for exception handling |
2012-03-05 |
Uwe Kleine-König |
|
New |
| [v2,5/5] arm/imx: use Kconfig choice for low-level debug UART selection |
2011-08-23 |
Will Deacon |
|
New |
| [v2,5/5] spi/ep93xx: add DMA support |
2011-06-08 |
Grant Likely |
|
New |
| [v2,5/6] ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq function |
2011-06-22 |
Fabio Estevam |
|
New |
| [v2,5/6] ARM: mxc: all three imx51 TOs use TO1 version of sdma script |
2011-06-14 |
Shawn Guo |
|
New |
| [v2,5/6] ARM: mxc: clean up imx-dma device registration |
2011-06-22 |
Shawn Guo |
|
New |
| [v2,5/6] ARM: mxs: add usb phy operations |
2011-07-25 |
Tony Lin |
|
New |
| [v2,5/6] arm/imx6q: add device tree machine support |
2011-09-15 |
Shawn Guo |
|
New |
| [v2,5/7] ARM: imx6q: convert to use syscon to access anatop registers |
2012-08-27 |
Dong Aisheng |
|
New |
| [v2,5/7] ARM: imx: eliminate macro IRQ_GPIOx() |
2012-02-15 |
Shawn Guo |
|
New |
| [v2,5/7] ARM: imx: remove incorrect BSYM usage |
2012-01-12 |
Rob Herring |
|
New |
| [v2,5/7] ARM: mxs: convert tx28 board to device tree |
2012-07-10 |
Shawn Guo |
|
New |
| [v2,5/7] arm: sunxi: Add clock to pinctrl node |
2013-03-27 |
Emilio López |
|
New |
| [v2,5/7] spi/imx: use soc name in spi device type naming scheme |
2011-07-09 |
Shawn Guo |
|
New |
| [v2,5/8] ARM: OMAP2+: hwmod: ensure that SYSCONFIG bits are reprogrammed after a reset |
2012-02-28 |
Paul Walmsley |
|
New |
| [v2,5/8] ARM: mxs: change the lookup name for fec phy clock |
2012-04-28 |
Shawn Guo |
|
New |
| [v2,5/8] gpio/mxc: move irq_to_gpio() into gpio-mxc driver |
2011-08-13 |
Shawn Guo |
|
New |
| [v2,5/9] ARM: mxc: convert audmux-v2 to a platform driver |
2012-02-02 |
Richard Zhao |
|
New |
| [v2,6/6] ARM: mach-imx/mx27_3ds: Do not annotate the chip select as internal |
2011-06-22 |
Fabio Estevam |
|
New |
| [v2,6/6] ARM: make mach/gpio.h headers optional |
2012-09-06 |
Rob Herring |
|
New |
| [v2,6/6] ARM: mxs: add usb host function to default config |
2011-07-25 |
Tony Lin |
|
New |
| [v2,6/6] arm/imx6q: add suspend/resume support |
2011-09-15 |
Shawn Guo |
|
New |
| [v2,6/6] arm/imx6q: add suspend/resume support |
2011-09-16 |
Shawn Guo |
|
New |
| [v2,6/6] dmaengine: imx-sdma: pass sdma firmware name via platform data |
2011-06-22 |
Shawn Guo |
|
New |
| [v2,6/7] ARM: mxs: convert stmp378x_devb board to device tree |
2012-07-10 |
Shawn Guo |
|
New |
| [v2,6/7] ARM: mxs: convert stmp378x_devb board to device tree |
2012-07-10 |
Shawn Guo |
|
New |
| [v2,6/7] clk: sunxi: drop CLK_IGNORE_UNUSED |
2013-03-27 |
Emilio López |
|
New |
| [v2,6/7] gpio/mxc: adopt irq_domain for gpio interrupt support |
2012-02-15 |
Shawn Guo |
|
New |
| [v2,6/7] spi/imx: copy gpio number passed by platform data into driver private data |
2011-07-09 |
Shawn Guo |
|
New |
| [v2,6/8] ARM i.MX5: Add System Reset Controller (SRC) support for i.MX51 and i.MX53 |
2013-02-13 |
Philipp Zabel |
|
New |
| [v2,6/8] ARM: OMAP2+: hwmod: provide a function to return the address space of the MPU RT |
2012-02-28 |
Paul Walmsley |
|
New |
| [v2,6/8] ARM: mxs: switch to common clk framework |
2012-04-28 |
Shawn Guo |
|
New |
| [v2,6/8] arm/mxc: move IMX_GPIO_NR into mach/hardware.h |
2011-08-13 |
Shawn Guo |
|
New |
| [v2,6/9] ARM: mx31ads: add audmux device |
2012-02-02 |
Richard Zhao |
|
New |
| [v2,7/7] ARM: imx: remove macro MXC_GPIO_IRQ_START |
2012-02-15 |
Shawn Guo |
|
New |
| [v2,7/7] ARM: mxc: remove esdhc.h and use the public one |
2011-05-05 |
Shawn Guo |
|
New |
| [v2,7/7] ARM: mxs: add dtb-y target into Makefile.boot |
2012-07-10 |
Shawn Guo |
|
New |
| [v2,7/7] clk: sunxi: drop an unnecesary kmalloc |
2013-03-27 |
Emilio López |
|
New |
| [v2,7/8] ARM: OMAP2+: hwmod: add omap_hwmod_get_resource_byname() |
2012-02-28 |
Paul Walmsley |
|
New |
| [v2,7/8] ARM: mxs: remove old clock support |
2012-04-28 |
Shawn Guo |
|
New |
| [v2,7/8] gpio/mxs: move irq_to_gpio() into gpio-mxs driver |
2011-08-13 |
Shawn Guo |
|
New |
| [v2,7/9] ARM: mxc: move audmux-v2 to sound/soc/imx |
2012-02-02 |
Richard Zhao |
|
New |
| [v2,8/8] ARM: mxs: remove now unused timer_clk argument from mxs_timer_init |
2012-04-28 |
Shawn Guo |
|
New |
| [v2,8/8] arm/mxs: move MXS_GPIO_NR into mach/mxs.h |
2011-08-13 |
Shawn Guo |
|
New |
| [v2,9/9] ARM i.MX: remove IRAM_ALLOC facility |
2012-08-31 |
Philipp Zabel |
|
New |
| [v2,9/9] ARM: imx6q-sabrelite: add audmux support |
2012-02-02 |
Richard Zhao |
|
New |
| [v2,for_v3.5] media: mx2_camera: Fix mbus format handling |
2012-06-01 |
Javier Martin |
|
New |
| [v2,resend,1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE |
2011-10-17 |
Matt Burtch |
|
New |
| [v2.1,0/9] SH pinctrl DT support |
2013-02-13 |
Simon Horman |
|
New |
| [v2] ARM : i.MX27 : split code for allocation of ressources of camera and eMMA |
2012-09-05 |
Gaëtan Carlier |
|
New |