| [1/3] dmaengine: at_hdmac: replace spin_lock* with irqsave variants |
2011-06-28 |
Nicolas Ferre |
|
New |
| [GIT,PULL] I2C: OMAP: major cleanup for v3.2 (was for v3.1) |
2011-08-23 |
Kevin Hilman |
|
New |
| [2/3] dmaengine: at_hdmac: improve power management routines |
2011-06-28 |
Nicolas Ferre |
|
New |
| [RFC] implement a generic PWM framework - once again |
2011-06-28 |
Sascha Hauer |
|
New |
| MXC PWM: should active during DOZE/WAIT/DBG mode |
2011-11-30 |
Jason Chen |
|
New |
| [00/15] Big pxa2[57]x_udc cleanup |
2011-07-05 |
Dmitry Eremin-Solenikov |
|
New |
| [3/3] dmaengine: at_hdmac: add slave config operation |
2011-06-28 |
Nicolas Ferre |
|
New |
| [v2] ARM: CSR: Adding CSR SiRFprimaII board support |
2011-06-28 |
Barry Song |
|
New |
| [1/4] ARM: mx53: Add support for missing UARTs |
2011-06-27 |
Fabio Estevam |
|
New |
| [2/4] ARM: mx53: Add SSI suport |
2011-06-27 |
Fabio Estevam |
|
New |
| [GIT,PULL] non-critical omap fixes for v3.1 merge window |
2011-07-05 |
Tony Lindgren |
|
New |
| ARM: mxs/tx28: according to the TX28's datasheet D4-D7 are not used for MMC0 |
2011-07-05 |
Uwe Kleine-König |
|
New |
| ARM: pxa168/gplugd: add the correct SSP device |
2011-11-14 |
Eric Miao |
|
New |
| [3/3] ARM i.MX: Update defconfig |
2011-11-14 |
Shawn Guo |
|
New |
| [v4,1/3] ARM: CSR: Adding CSR SiRFprimaII board support |
2011-07-07 |
Barry Song |
|
New |
| [GIT,PULL,v3,0/3] TrimSlice updates for 3.1 |
2011-07-07 |
Mike Rapoport |
|
New |
| [5/5] mmc: mxcmmc: explicitly includes mach/hardware.h |
2011-10-17 |
Shawn Guo |
|
New |
| [GIT,PULL] Samsung devel-3 for v3.2 |
2011-10-17 |
Kukjin Kim |
|
New |
| [GIT,PULL] Samsung cleanup-3 for v3.2 |
2011-10-17 |
Kukjin Kim |
|
New |
| [v2,5/5] ARM: mx5: add basic device tree support for imx51 babbage |
2011-06-24 |
Shawn Guo |
|
New |
| [v6,2/2] arm/mx5: add device tree support for imx51 babbage |
2011-10-17 |
Shawn Guo |
|
New |
| [v2,2/5] serial/imx: get rid of the use of cpu_is_mx1() |
2011-06-24 |
Shawn Guo |
|
New |
| [v6,1/2] arm/mx5: add device tree support for imx53 boards |
2011-10-17 |
Shawn Guo |
|
New |
| [0/8] ARM: at91: make dma/ecc/pit/smc/rtt register base soc independant |
2011-10-16 |
Jean-Christophe PLAGNIOL-VILLARD |
|
New |
| [AT91,PULL,for,3.2] boards merge + gpio rework |
2011-10-16 |
Jean-Christophe PLAGNIOL-VILLARD |
|
New |
| [GIT,PULL] misc. OMAP PM updates for v3.1 |
2011-06-24 |
Kevin Hilman |
|
New |
| [0/12] ARM: at91: make aic/ccfg/dbgu/dma/ecc/gpio/pit/rtt/smc/watchdog register base soc.h independant |
2011-11-13 |
Jean-Christophe PLAGNIOL-VILLARD |
|
New |
| [1/2] ARM:mx53: Add I2C3 support |
2011-06-22 |
Andre Silva |
|
New |
| [2/2] ARM:mach-mx5/mx53_ard: Add I2C2 and I2C3 support |
2011-06-22 |
Andre Silva |
|
New |
| [v2,6/6] dmaengine: imx-sdma: pass sdma firmware name via platform data |
2011-06-22 |
Shawn Guo |
|
New |
| [v2,3/6] ARM: mxc: change imx-dma default to_version to 1 |
2011-06-22 |
Shawn Guo |
|
New |
| [GIT,PULL] i.MX cleanup patches |
2011-10-19 |
Sascha Hauer |
|
New |
| [GIT,PULL] ARM: OMAP: new miscellaneous clock/hwmod data for 3.2 |
2011-10-10 |
Paul Walmsley |
|
New |
| [v2,5/6] ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq function |
2011-06-22 |
Fabio Estevam |
|
New |
| [v2,2/6] ARM: mach-imx/mx27_3ds: Fix regulator support |
2011-06-22 |
Fabio Estevam |
|
New |
| [GIT,PULL] ARM: SoC: one more bug fix for 3.6 |
2012-09-27 |
Olof Johansson |
|
New |
| [GIT,PULL] irqchip init infrastructure and GIC/VIC move |
2013-01-12 |
Rob Herring |
|
New |
| [3/3] mxc: iomuxv1: Do not use gpio_request when setting the pin as GPIO |
2011-06-21 |
Fabio Estevam |
|
New |
| [2/3] ARM: mach-imx/scb9328: Make the UART gpio setup simpler |
2011-06-21 |
Fabio Estevam |
|
New |
| arm: prevent inlining in arxescsi.c causing build failures |
2012-01-22 |
Paul Gortmaker |
|
New |
| [34/52] ARM: mach-pxa: convert boot_params to atag_offset |
2011-07-06 |
Nicolas Pitre |
|
New |
| [12/52] ARM: mach-imx: convert boot_params to atag_offset |
2011-07-06 |
Nicolas Pitre |
|
New |
| [resent,v2,2/2] ARM: mxs: add GPMI-NAND support for imx23/imx28 |
2012-01-19 |
Huang Shijie |
|
New |
| mc13xxx: add I2C support |
2012-01-19 |
Shawn Guo |
|
New |
| i.MX consolidation patches |
2011-06-22 |
Sascha Hauer |
|
New |
| [GIT,PULL] imx: fix add_irq_domain |
2011-12-06 |
Shawn Guo |
|
New |
| [v2,2/3] ARM: use clockevents_config_and_register() where possible |
2013-01-12 |
Shawn Guo |
|
New |
| disable the correct parent clock in clk_gate_disable() |
2011-08-02 |
Lothar Waßmann |
|
New |
| [v3,1/2] arm/mx5: add device tree support for imx53 boards |
2011-08-02 |
Shawn Guo |
|
New |
| [2/6] ARM: mach-imx/mx27_3ds: Fix regulator support |
2011-06-20 |
Fabio Estevam |
|
New |
| [5/6] ARM: mach-imx/mx27_3ds: Use the standard gpio_to_irq function |
2011-06-20 |
Fabio Estevam |
|
New |
| [v5,1/3] ARM: CSR: Adding CSR SiRFprimaII board support |
2011-07-08 |
Barry Song |
|
New |
| [GIT,PULL] DaVinci features for v3.1 |
2011-07-08 |
Sekhar Nori |
|
New |
| [GIT,PULL] DaVinci cleanups for v3.1 |
2011-07-08 |
Sekhar Nori |
|
New |
| [2/6] spi/imx: use soc name in spi device type naming scheme |
2011-07-08 |
Shawn Guo |
|
New |
| [v6,2/4] ARM: mxs: add new a pad control |
2011-07-08 |
Huang Shijie |
|
New |
| [v6,1/4] ARM: mxs: add GPMI-NAND support for imx23/imx28 |
2011-07-08 |
Huang Shijie |
|
New |
| [GIT,PULL] msm gpio move to drivers/gpio |
2011-08-01 |
David Brown |
|
New |
| [4/5] ASoC: atmel_ssc_dai/atmel-pcm: adapt to dmaengine usage |
2011-06-29 |
Nicolas Ferre |
|
New |
| [2/5] ASoC: atmel-ssc: add phybase in device structure |
2011-06-29 |
Nicolas Ferre |
|
New |
| [1/2] ARM: mx25: Fix typo on CAN1_RX pad setting |
2011-07-08 |
Fabio Estevam |
|
New |
| [1/5] ASoC: wm8731: rework power management |
2011-06-29 |
Nicolas Ferre |
|
New |
| [GIT,PULL] Samsung devel for v3.3 |
2012-01-03 |
Kukjin Kim |
|
New |
| [GIT,PULL] Samsung cleanup for v3.3 |
2012-01-03 |
Kukjin Kim |
|
New |
| [5/8] ARM: mx5: dynamically allocate high speed i2c (imx-i2c actually) |
2011-08-01 |
Uwe Kleine-König |
|
New |
| [4/8] ARM: mx5: dynamically allocate fsl-usb2-udc devices |
2011-08-01 |
Uwe Kleine-König |
|
New |
| [3/8] ARM: mx5: dynamically allocate mxc-ehci devices |
2011-08-01 |
Uwe Kleine-König |
|
New |
| Status of arm-soc.git for 3.2 |
2012-01-03 |
Arnd Bergmann |
|
New |
| [1/8] ARM: mx5: fix remaining unconsistent names for irqs |
2011-08-01 |
Uwe Kleine-König |
|
New |
| [3/4] CS89x0 : add CS89x0 platform device to the iMX31ADS board |
2012-01-03 |
Jaccon Bastiaansen |
|
New |
| [0/8] ARM: getting rid of mx5/devices.c and mxc_register_device |
2011-08-01 |
Uwe Kleine-König |
|
New |
| ARM: mx28: Clear CLKGATE bit prior to changing DIV field |
2012-01-19 |
Fabio Estevam |
|
New |
| [git,pull] trivial gpio build failure fixups |
2011-10-29 |
Grant Likely |
|
New |
| [git,pull] trivial gpio build failure fixups |
2011-10-29 |
Grant Likely |
|
New |
| [GIT,PULL] U300 and Ux500 patches for the arm-soc tree |
2011-06-23 |
Linus Walleij |
|
New |
| [GIT,PULL] arm-soc fixes for 3.1 |
2011-09-12 |
Arnd Bergmann |
|
New |
| [v2] ARM: mach-imx/mx31_3ds: Fix IOMUX for SPI1 signals |
2011-06-20 |
Fabio Estevam |
|
New |
| ARM: imx: Define functions for registering PATA |
2011-08-24 |
Fabio Estevam |
|
New |
| [V2,3/4] arm/imx6q: register arm_clk as cpu to clkdev |
2011-12-16 |
Mark Langsdorf |
|
New |
| [V2] MMC: PM: add suspend/resume in atmel-mci |
2011-06-30 |
Nicolas Ferre |
|
New |
| ep93xx-eth: convert to phylib |
2011-06-15 |
Mika Westerberg |
|
New |
| [GIT,PULL] pxa: fixing patches for v3.0-rc6 |
2011-07-05 |
Eric Miao |
|
New |
| [v2,1/3] mmc: sdhci-esdhc-imx: get rid of the uses of cpu_is_mx() |
2011-07-05 |
Shawn Guo |
|
New |
| [v2,2/3] gpio/mxc: get rid of the uses of cpu_is_mx() |
2011-07-05 |
Shawn Guo |
|
New |
| [v3] implement a generic PWM framework |
2011-06-30 |
Sascha Hauer |
|
New |
| [GIT,PULL] pxa: patches for v3.1 |
2011-07-05 |
Eric Miao |
|
New |
| [v2,1/3] gpio/mxc: get gpio range/base from gpio core |
2011-07-05 |
Shawn Guo |
|
New |
| [v2,1/2] serial/imx: get rid of the uses of cpu_is_mx1() |
2011-07-05 |
Shawn Guo |
|
New |
| [GIT,PULL] omap clean-up for v3.1 merge window |
2011-06-30 |
Tony Lindgren |
|
New |
| [1/2] ARM: mach-imx/mx31ads: Fix section mismatches |
2011-06-14 |
Fabio Estevam |
|
New |
| [2/2] ARM: mach-imx/mx31lilly: Fix section mismatches |
2011-06-14 |
Fabio Estevam |
|
New |
| [v4,1/3] ARM: i.MX5/mm: Consolidate arch/arm/mach-mx5/mm-*.c |
2011-09-09 |
Jason Liu |
|
New |
| [GIT,PULL] ux500 <mach/id.h> removal |
2013-01-29 |
Linus Walleij |
|
New |
| [v2,4/4] irqchip: gic: Perform the gic_secondary_init() call via CPU notifier |
2013-01-29 |
Catalin Marinas |
|
New |
| [1/2] ARM:mach-mx5/mx53_ard: Add ESDHC support |
2011-06-13 |
Andre Silva |
|
New |
| [2/2] ARM:mach-mx5/mx53_ard: Add Watchdog timer support |
2011-06-13 |
Andre Silva |
|
New |
| [GIT,PULL] Samsung fixes-4 for v3.8 |
2013-01-29 |
Kukjin Kim |
|
New |
| [no subject] |
2011-06-13 |
Andre Silva |
|
New |
| ARM: mx53: Add SDMA support for MX53 |
2011-06-13 |
Fabio Estevam |
|
New |
| arm: mx23: add machine_is_stmp_378x() |
2011-10-10 |
Wolfram Sang |
|
New |
