| [3/3] ARM: AM335x: Fix warning in timer.c |
2012-11-28 |
Hunter, Jon |
|
New |
| [3/3] ARM: AM335x: Fix warning in timer.c |
2012-11-28 |
hvaibhav@ti.com |
|
New |
| [3/3] ARM: OMAP2+: Fix is_gpmc_muxed warning for H4 |
2013-04-18 |
Tony Lindgren |
|
New |
| [3/3] ARM: OMAP2+: hwmod code: convert missing clockdomain warnings to debug messages |
2012-09-18 |
Paul Walmsley |
|
New |
| [3/3] ARM: OMAP: AM35xx: fix UART4 softreset |
2012-05-10 |
Paul Walmsley |
|
New |
| [3/3] ARM: allow to detect conflicting zreladdrs |
2011-08-10 |
Sascha Hauer |
|
New |
| [3/3] ARM: dts: mxs: Add the LCD to the 10049 board |
2013-01-22 |
Maxime Ripard |
|
New |
| [3/3] ARM: dts: mxs: Add the LCD to the 10049 board |
2013-01-25 |
Maxime Ripard |
|
New |
| [3/3] ARM: i.MX5x clocks: Fix GPT clocks |
2012-07-10 |
Alexander Shiyan |
|
New |
| [3/3] ARM: imx: Add imx6q cpuidle driver |
2012-04-16 |
Robert Lee |
|
New |
| [3/3] ARM: imx: create imx_arch_reset_init() for DT boot |
2013-05-13 |
Shawn Guo |
|
New |
| [3/3] ARM: imx: enable RBC to support anatop LPM mode |
2013-03-20 |
Anson Huang |
|
New |
| [3/3] ARM: imx: enable imx6q-cpufreq support |
2013-01-08 |
Shawn Guo |
|
New |
| [3/3] ARM: imx_v6_v7_defconfig: Add DA9052 regulator support |
2012-09-26 |
Fabio Estevam |
|
New |
| [3/3] ARM: imx_v6_v7_defconfig: enable parallel display |
2013-04-03 |
Rogerio Pimentel |
|
New |
| [3/3] ARM: mx28: add auart4 2 pins pinmux to imx28.dtsi |
2013-04-08 |
Eric Benard |
|
New |
| [3/3] ARM: mx28evk: Add SPI NOR flash support |
2012-04-03 |
Fabio Estevam |
|
New |
| [3/3] ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI |
2012-01-20 |
Fabio Estevam |
|
New |
| [3/3] ARM: mx5: add basic device tree support for imx51 babbage |
2011-06-18 |
Shawn Guo |
|
New |
| [3/3] ARM: mxs/tx28: convert to new leds-gpio registration helper |
2011-05-28 |
Uwe Kleine-König |
|
New |
| [3/3] ARM: mxs: always build in device tree support |
2012-05-07 |
Shawn Guo |
|
New |
| [3/3] ARM: mxs: enable multiplatform build |
2013-03-29 |
Shawn Guo |
|
New |
| [3/3] ARM: mxs: move icoll driver into drivers/irqchip |
2013-03-25 |
Shawn Guo |
|
New |
| [3/3] ARM: mxs: ocotp: Fix sparse warning |
2013-02-11 |
Fabio Estevam |
|
New |
| [3/3] ARM: mxs: select GPIO_MXS for i.MX23 and i.MX28 |
2011-05-20 |
Shawn Guo |
|
New |
| [3/3] ARM: mxs_defconfig: Add SPI and LRADC support |
2012-08-27 |
Fabio Estevam |
|
New |
| [3/3] ARM: mxs_defconfig: Build CONFIG_INPUT_EVDEV as built-in |
2013-02-08 |
Fabio Estevam |
|
New |
| [3/3] ARM: mxs_defconfig: Enable CONFIG_RESET_GPIO |
2013-04-03 |
Fabio Estevam |
|
New |
| [3/3] ARM: remove empty disable_fiq and arch_ret_to_user macros |
2012-02-06 |
Rob Herring |
|
New |
| [3/3] ARM: sunxi: unify osc24M_fixed and osc24M |
2013-04-09 |
Emilio López |
|
New |
| [3/3] Visstrim M10: Add support for Coda. |
2012-07-06 |
Javier Martin |
|
New |
| [3/3] Visstrim M10: Add support for Coda. |
2012-07-06 |
Russell King - ARM Linux |
|
New |
| [3/3] Visstrim M10: Add support for SAHARA2 module. |
2013-02-21 |
Javier Martin |
|
New |
| [3/3] arm: add bandgap entry for OMAP4460 devices |
2013-04-17 |
Eduardo Valentin |
|
New |
| [3/3] arm: mxs: disable clock-gates when setting saif-clocks |
2011-08-21 |
Dong Aisheng |
|
New |
| [3/3] arm: sunxi: Add useful information about sunxi clocks |
2013-01-22 |
Emilio López |
|
New |
| [3/3] dmaengine: at_hdmac: add slave config operation |
2011-06-28 |
Nicolas Ferre |
|
New |
| [3/3] efika: Fix board id detection |
2011-06-27 |
Arnaud Patard (Rtp) |
|
New |
| [3/3] i.MX SDMA: Fix burstsize settings |
2012-01-20 |
Philippe Rétornaz |
|
New |
| [3/3] i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16. |
2012-03-26 |
Javier Martin |
|
New |
| [3/3] imx: efika: Enable pata. |
2011-07-26 |
Arnaud Patard (Rtp) |
|
New |
| [3/3] imx: efika: Enable pata. |
2011-07-22 |
Arnaud Patard (Rtp) |
|
New |
| [3/3] imx: efika: Enable pata. |
2011-07-24 |
Arnaud Patard (Rtp) |
|
New |
| [3/3] imx: efika: Enable pata. |
2011-07-16 |
Arnaud Patard (Rtp) |
|
New |
| [3/3] mc13xxx: implicitly enable leds and buttons |
2011-07-09 |
Philippe Rétornaz |
|
New |
| [3/3] mmc: esdhc i.MX: Support 8bit mode |
2012-09-24 |
Sascha Hauer |
|
New |
| [3/3] mxc: iomuxv1: Do not use gpio_request when setting the pin as GPIO |
2011-06-21 |
Fabio Estevam |
|
New |
| [3/3] omap: remoteproc: add support for a boot register |
2012-04-13 |
Gutierrez, Juan |
|
New |
| [3/3] pwm-core: fix registration of several pwm |
2012-04-29 |
Eric Benard |
|
New |
| [3/3] pwm: fix pwmchip_add return code test |
2012-04-29 |
Eric Benard |
|
New |
| [3/4,V2] ARM: mxs: Update DENX M28 machine and dts file |
2012-08-24 |
Marek Vasut |
|
New |
| [3/4,v2] crypto: Atmel TDES driver: add support for latest release of the IP (0x700) |
2013-02-20 |
Nicolas Royer |
|
New |
| [3/4] ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER |
2011-09-20 |
Sascha Hauer |
|
New |
| [3/4] ARM i.MX boards: use CONFIG_MULTI_IRQ_HANDLER |
2011-09-26 |
Sascha Hauer |
|
New |
| [3/4] ARM i.MX pcm037: register a dummy regulator for the smsc911x device |
2012-03-03 |
Sascha Hauer |
|
New |
| [3/4] ARM i.MX5: update defconfig |
2011-08-24 |
Sascha Hauer |
|
New |
| [3/4] ARM i.MX: remove now unnecessary argument from mxc_timer_init |
2012-05-16 |
Sascha Hauer |
|
New |
| [3/4] ARM: OMAP2+: hwmod: add flag to prevent hwmod code from touching IP block during init |
2012-10-31 |
Paul Walmsley |
|
New |
| [3/4] ARM: bugfix i.MX cpufreq clock id |
2013-02-25 |
Markus Pargmann |
|
New |
| [3/4] ARM: clk-imx27: Remove unneeded '#ifdef CONFIG_OF' |
2012-06-15 |
Fabio Estevam |
|
New |
| [3/4] ARM: clk-imx31: Add dummy clock |
2012-11-22 |
Fabio Estevam |
|
New |
| [3/4] ARM: create a common IOMEM definition |
2012-03-11 |
Rob Herring |
|
New |
| [3/4] ARM: imx6q: Set enet tx reference clk from anatop to support 1588 |
2012-10-31 |
Frank Li |
|
New |
| [3/4] ARM: mx51: Fix the address space length for SSI |
2011-06-27 |
Fabio Estevam |
|
New |
| [3/4] ARM: mx53: Add resources for flexcan |
2011-09-06 |
Rogerio Pimentel |
|
New |
| [3/4] ARM: mxc: migrate mach-imx gpio driver to gpio-mxc |
2011-05-30 |
Shawn Guo |
|
New |
| [3/4] ARM: mxs: remove the .map_io declaration |
2013-05-13 |
Maxime Ripard |
|
New |
| [3/4] ASoC: add imx-mc13783 sound support |
2012-05-15 |
Philippe Rétornaz |
|
New |
| [3/4] CS89x0 : add CS89x0 platform device to the iMX31ADS board |
2012-01-03 |
Jaccon Bastiaansen |
|
New |
| [3/4] MXS: Implement DMA support into mxs-i2c |
2012-05-01 |
Marek Vasut |
|
New |
| [3/4] arm/imx: fix AUTO_ZRELADDR selection |
2011-11-10 |
Shawn Guo |
|
New |
| [3/4] efikamx: remove Genesi Efika MX platform files from the tree |
2012-08-01 |
Matt Sealey |
|
New |
| [3/4] imx27-dt: configure i2c1 gpio on armadeus apf27 |
2012-11-25 |
trem |
|
New |
| [3/4] mfd: ab8500: add devicetree support for charger |
2012-11-22 |
Rajanikanth H.V |
|
New |
| [3/4] mfd: ab8500: add devicetree support for charger |
2012-10-31 |
Rajanikanth H.V |
|
New |
| [3/4] mfd: ab8500: add devicetree support for charger |
2012-10-01 |
Rajanikanth H.V |
|
New |
| [3/4] mfd: ab8500: add devicetree support for charger |
2012-10-25 |
Rajanikanth H.V |
|
New |
| [3/4] mmc: mmci: Ensure return value of regulator_enable() is checked |
2013-05-02 |
Lee Jones |
|
New |
| [3/4] mx31moboard: Add ssi configuration |
2012-03-09 |
Philippe Rétornaz |
|
New |
| [3/5] ARM i.MX53: make tve_ext_sel propagate rate change to PLL |
2013-04-08 |
Philipp Zabel |
|
New |
| [3/5] ARM: OMAP2+: powerdomain/PRM: move the low-level powerdomain functions into PRM |
2012-10-15 |
Paul Walmsley |
|
New |
| [3/5] ARM: force branch instructions to use long distance encoding |
2012-02-16 |
Uwe Kleine-König |
|
New |
| [3/5] ARM: imx: add audio codec clk lookup for imx53-qsb |
2012-05-11 |
Shawn Guo |
|
New |
| [3/5] ARM: imx: add initial support for imx6sl |
2013-05-03 |
Shawn Guo |
|
New |
| [3/5] ARM: mx31lilly: Fix smsc911x driver probe |
2012-04-02 |
Fabio Estevam |
|
New |
| [3/5] ARM: mx53: Fix the logic for BYPASS_MAX_LPM_HS |
2011-08-26 |
Fabio Estevam |
|
New |
| [3/5] ASoC: atmel-ssc: dmaengine usage switch depending on cpu |
2011-06-29 |
Nicolas Ferre |
|
New |
| [3/5] arm/imx: remove mx27_setup_weimcs() from mx27.h |
2011-10-17 |
Shawn Guo |
|
New |
| [3/5] crypto: Atmel AES driver: add support for latest release of the IP (0x130) |
2012-11-06 |
Nicolas Royer |
|
New |
| [3/5] crypto: add Atmel DES/TDES driver |
2012-07-01 |
Eric Benard |
|
New |
| [3/5] iram_alloc: store the virt and phys mem address in gen_pool chunks |
2012-08-24 |
Philipp Zabel |
|
New |
| [3/6] ARM: OMAP: omap_device: register to the per-device PM QoS framework |
2012-04-18 |
Jean Pihet |
|
New |
| [3/6] ARM: i.MX53: consistently use MX53_UART_PAD_CTRL for uart txd/rxd/rts/cts |
2011-07-12 |
Troy Kisky |
|
New |
| [3/6] ARM: imx: add initial imx6dl support |
2013-04-02 |
Shawn Guo |
|
New |
| [3/6] ARM: imx: build pm-imx5 code only when PM is enabled |
2012-08-22 |
Arnd Bergmann |
|
New |
| [3/6] ARM: mach-imx/mx27_3ds: Add LCD support |
2011-06-20 |
Fabio Estevam |
|
New |
| [3/6] ARM: mx27: Print silicon revision on boot |
2011-08-23 |
Jason Liu |
|
New |
| [3/6] ARM: mxc: change imx-dma default to_version to 1 |
2011-06-13 |
Shawn Guo |
|
New |
| [3/6] ARM: mxs: get timrot base address from device tree |
2013-03-25 |
Shawn Guo |
|
New |
| [3/6] ARM: mxs: remove board files |
2012-08-06 |
Shawn Guo |
|
New |
