| [v2,2/2] ARM: imx_v4_v5_defconfig: Add VPU support |
2012-11-14 |
Fabio Estevam |
|
New |
| [v2,2/2] ARM: imx_v4_v5_defconfig: Add VPU support |
2012-11-14 |
Fabio Estevam |
|
New |
| [v2,2/2] ARM: imx_v6_v7_defconfig: Add SPI NOR support |
2012-04-27 |
Fabio Estevam |
|
New |
| [v2,2/2] ARM: mach-mxs: Remove board entries in dt_board_compat |
2012-08-15 |
Fabio Estevam |
|
New |
| [v2,2/2] ARM: mx27: Print silicon revision on boot |
2011-08-22 |
Fabio Estevam |
|
New |
| [v2,2/2] ARM: mx3: Let mx31 and mx35 enter in LPM mode in WFI |
2012-02-02 |
Fabio Estevam |
|
New |
| [v2,2/2] ARM: mx5/eukrea_mbimx51-baseboard: Fix build issue due to removed irq |
2011-06-04 |
Fabio Estevam |
|
New |
| [v2,2/2] ARM: mxs: Add initial support for Bluegiga APX4 Development Kit |
2012-01-06 |
Shawn Guo |
|
New |
| [v2,2/2] ARM: mxs: use gpio-mxs driver by adding platform device |
2011-05-28 |
Shawn Guo |
|
New |
| [v2,2/2] ARM:i.MX: fix build error in clock-mx51-mx53.c |
2011-11-03 |
Jason Liu |
|
New |
| [v2,2/2] MEM2MEM: Add support for eMMa-PrP mem2mem operations. |
2011-11-23 |
Javier Martin |
|
New |
| [v2,2/2] arm: imx: add missing select IMX_HAVE_PLATFORM for MACH_MX35_3DS in Kconfig |
2012-04-24 |
Marc Kleine-Budde |
|
New |
| [v2,2/2] arm: mxs: enable flexcan on imx28 |
2012-07-02 |
Marc Kleine-Budde |
|
New |
| [v2,2/2] clk: composite: allow fixed rates & fixed dividers |
2013-04-11 |
Mike Turquette |
|
New |
| [v2,2/3] ARM: i.MX51: clean up iomux-mx51.h |
2011-08-11 |
Troy Kisky |
|
New |
| [v2,2/3] ARM: imx6q: add clock for apbh-dma |
2012-06-07 |
Huang Shijie |
|
New |
| [v2,2/3] ARM: imx: Add cpuidle for mach-mx5 |
2011-09-16 |
Robert Lee |
|
New |
| [v2,2/3] ARM: imx: Add imx5 cpuidle driver |
2012-05-02 |
Robert Lee |
|
New |
| [v2,2/3] ARM: iwmmxt: Port problematic iwmmxt support code to v7/Thumb-2 |
2011-09-08 |
Eric Miao |
|
New |
| [v2,2/3] ARM: mx28: add gpmi-nand dt support |
2012-04-25 |
Huang Shijie |
|
New |
| [v2,2/3] ARM: mx28evk: set a initial clock rate for saif |
2011-09-07 |
Dong Aisheng |
|
New |
| [v2,2/3] ARM: mx5/mx51_babbage: Use gpio_request_one when possible |
2011-04-29 |
Fabio Estevam |
|
New |
| [v2,2/3] ARM: use clockevents_config_and_register() where possible |
2013-01-12 |
Shawn Guo |
|
New |
| [v2,2/3] arm/mx5: add device tree support for imx53 boards |
2011-07-30 |
Shawn Guo |
|
New |
| [v2,2/3] arm: sunxi: Add clock definitions for the new clock driver |
2013-02-25 |
Emilio López |
|
New |
| [v2,2/3] crypto: sahara: Add driver for SAHARA2 accelerator. |
2013-02-28 |
Arnaud Patard (Rtp) |
|
New |
| [v2,2/3] gpio/mxc: get rid of the uses of cpu_is_mx() |
2011-07-05 |
Shawn Guo |
|
New |
| [v2,2/3] i.MX27: visstrim_m10: Remove use of MX2_CAMERA_SWAP16. |
2012-03-26 |
Javier Martin |
|
New |
| [v2,2/4] ARM: i.MX5x clocks: Fix parent for PWM clocks |
2012-07-12 |
Alexander Shiyan |
|
New |
| [v2,2/4] ARM: imx6q: replace clk_register_clkdev with clock DT lookup |
2012-08-22 |
Shawn Guo |
|
New |
| [v2,2/4] ARM: imx: mask gpc interrupts initially |
2012-12-04 |
Shawn Guo |
|
New |
| [v2,2/4] ARM: mx53: Add clock for flexcan |
2011-09-09 |
Rogerio Pimentel |
|
New |
| [v2,2/4] ARM: mxc: migrate mach-mx5 gpio driver to gpio-mxc |
2011-06-02 |
Shawn Guo |
|
New |
| [v2,2/4] OMAP: clockdomain code/data: remove omap_chip bitmask from struct clockdomain |
2011-09-14 |
Paul Walmsley |
|
New |
| [v2,2/4] i.MX27: visstrim_m10: Register I2C devices after I2C busses have been added. |
2012-02-28 |
Javier Martin |
|
New |
| [v2,2/4] mtd: atmel_nand: add Nand Flash Controller (NFC) support |
2013-05-17 |
Wu, Josh |
|
New |
| [v2,2/5] ARM: ep93xx: add model detection for ts-7300 and ts-7400 boards |
2011-06-12 |
Petr Štetiar |
|
New |
| [v2,2/5] ARM: gic: remove direct use of gic_raise_softirq |
2012-10-31 |
Rob Herring |
|
New |
| [v2,2/5] ARM: imx27, imx5: Add kconfig selects for cpufreq-cpu0 |
2013-03-27 |
Markus Pargmann |
|
New |
| [v2,2/5] ASoC: TI AESS: add autogating-enable function, callable from architecture code |
2013-01-09 |
Sebastien Guiriec |
|
New |
| [v2,2/5] clk: zynq: Factor out PLL driver |
2013-05-13 |
Soren Brinkmann |
|
New |
| [v2,2/5] dma: mxs-dma: make platform_device_id more generic |
2012-05-04 |
Dong Aisheng |
|
New |
| [v2,2/5] serial/imx: get rid of the use of cpu_is_mx1() |
2011-06-24 |
Shawn Guo |
|
New |
| [v2,2/6] ARM: mach-imx/mx27_3ds: Fix regulator support |
2011-06-22 |
Fabio Estevam |
|
New |
| [v2,2/6] ARM: mxc: sdma on imx25 is a V2 block |
2011-06-22 |
Shawn Guo |
|
New |
| [v2,2/6] ARM: mxs: enable usb1 phy power supply |
2011-07-25 |
Tony Lin |
|
New |
| [v2,2/6] arm/imx6q: add core definitions and low-level debug uart |
2011-09-15 |
Shawn Guo |
|
New |
| [v2,2/7] ARM: imx5: adopt generic_chip irq_domain support for tzic |
2012-02-15 |
Shawn Guo |
|
New |
| [v2,2/7] ARM: virt: allow the kernel to be entered in HYP mode |
2012-10-06 |
Marc Zyngier |
|
New |
| [v2,2/7] arm: sunxi: Add clock definitions for AXI, AHB, APB0, APB1 gates |
2013-03-27 |
Emilio López |
|
New |
| [v2,2/7] spi/imx: use mx21 to name SPI_IMX_VER_0_0 function and macro |
2011-07-09 |
Shawn Guo |
|
New |
| [v2,2/8] ARM: OMAP4: hwmod data: remove pseudo-hwmods associated with hardreset lines |
2012-02-28 |
Paul Walmsley |
|
New |
| [v2,2/8] arm/mxc: do not use gpio_to_irq() for static initializers |
2011-08-13 |
Shawn Guo |
|
New |
| [v2,2/9] ARM: imx6q: add cko1 clock |
2012-02-02 |
Richard Zhao |
|
New |
| [v2,20/34] mtd: mxc_nand: remove cpu_is_xxx by using platform_device_id |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,21/34] rtc: mxc_rtc: remove cpu_is_xxx by using platform_device_id |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,23/34] dma: imx-dma: retrieve MEM and IRQ from resources |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,24/34] dma: imx-dma: remove cpu_is_xxx by using platform_device_id |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,27/34] media: mx2_camera: remove cpu_is_xxx by using platform_device_id |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,28/34] mmc: mxcmmc: remove cpu_is_xxx by using platform_device_id |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,29/34] video: imxfb: remove cpu_is_xxx by using platform_device_id |
2012-09-20 |
Shawn Guo |
|
New |
| [v2,3/3] ARM: i.MX53: clean up iomux-mx53.h |
2011-08-11 |
Troy Kisky |
|
New |
| [v2,3/3] ARM: imx6q: switch to use pinctrl driver |
2012-04-20 |
Dong Aisheng |
|
New |
| [v2,3/3] ARM: imx: Add cpuidle for i.MX51 |
2011-09-16 |
Robert Lee |
|
New |
| [v2,3/3] ARM: imx: Add imx6q cpuidle driver |
2012-05-02 |
Robert Lee |
|
New |
| [v2,3/3] ARM: imx: create mxc_arch_reset_init_dt() for DT boot |
2013-05-13 |
Shawn Guo |
|
New |
| [v2,3/3] ARM: imx_v6_v7_defconfig: Select MXS_DMA |
2012-07-25 |
Fabio Estevam |
|
New |
| [v2,3/3] ARM: mx5/mx51_babbage: Fix the msleep placement |
2011-04-29 |
Fabio Estevam |
|
New |
| [v2,3/3] ARM: mx6q: add gpmi-nand dt support |
2012-04-25 |
Huang Shijie |
|
New |
| [v2,3/3] ARM: mxs_defconfig: Enable CONFIG_RESET_GPIO |
2013-04-03 |
Fabio Estevam |
|
New |
| [v2,3/3] ARM: mxs_defconfig: Let AUART driver be built by default |
2012-06-15 |
Fabio Estevam |
|
New |
| [v2,3/3] ARM: pxa/pj4: Port problematic pj4 support code to v7/Thumb-2 |
2011-09-08 |
Eric Miao |
|
New |
| [v2,3/3] Visstrim M10: Add support for Coda. |
2012-07-09 |
Javier Martin |
|
New |
| [v2,3/3] arm/mx5: add device tree support for imx51 babbage |
2011-07-30 |
Shawn Guo |
|
New |
| [v2,3/3] arm: mxs: disable clock-gates when setting saif-clocks |
2011-09-07 |
Dong Aisheng |
|
New |
| [v2,3/3] arm: sunxi: Add useful information about sunxi clocks |
2013-02-25 |
Emilio López |
|
New |
| [v2,3/3] clk: sunxi: Unify oscillator clock |
2013-04-10 |
Mike Turquette |
|
New |
| [v2,3/3] media: mx2_camera: Fix mbus format handling. |
2012-03-26 |
Javier Martin |
|
New |
| [v2,3/4] ARM: i.MX5x clocks: Fix GPT clocks This patch fix incorrect defined bits for GPT clocks according to datasheet. |
2012-07-12 |
Alexander Shiyan |
|
New |
| [v2,3/4] ARM: imx: move imx6q_cpuidle_driver into a separate file |
2012-12-04 |
Shawn Guo |
|
New |
| [v2,3/4] ARM: mx53: Add resources for flexcan |
2011-09-09 |
Rogerio Pimentel |
|
New |
| [v2,3/4] ARM: mxc: migrate mach-imx gpio driver to gpio-mxc |
2011-06-02 |
Shawn Guo |
|
New |
| [v2,3/4] i.MX27: visstrim_m10: Add m41t00 RTC support. |
2012-02-28 |
Javier Martin |
|
New |
| [v2,3/5] ARM: OMAP4+: AESS: enable internal auto-gating during initial setup |
2013-01-09 |
Sebastien Guiriec |
|
New |
| [v2,3/5] ARM: ep93xx: increase NR_BANKS to 16 for support of 128MB RAM |
2011-06-12 |
Petr Štetiar |
|
New |
| [v2,3/5] ARM: imx27 DT init cpufreq-cpu0 device |
2013-03-27 |
Markus Pargmann |
|
New |
| [v2,3/5] ARM: make the platforms not to select the l2x0 erratas |
2013-01-29 |
Srinidhi Kasagar |
|
New |
| [v2,3/5] clk: zynq: Add clock controller driver |
2013-05-13 |
Soren Brinkmann |
|
New |
| [v2,3/6] ARM: mach-imx/mx27_3ds: Add LCD support |
2011-06-22 |
Fabio Estevam |
|
New |
| [v2,3/6] ARM: mxc: change imx-dma default to_version to 1 |
2011-06-22 |
Shawn Guo |
|
New |
| [v2,3/6] ARM: mxs: add usb clocks to clock tree |
2011-07-25 |
Tony Lin |
|
New |
| [v2,3/6] arm/imx6q: add core drivers clock, gpc, mmdc and src |
2011-09-15 |
Shawn Guo |
|
New |
| [v2,3/7] ARM: imx: eliminate macro IMX_GPIO_TO_IRQ() |
2012-02-15 |
Shawn Guo |
|
New |
| [v2,3/7] ARM: mxs: convert m28evk board to device tree |
2012-07-10 |
Shawn Guo |
|
New |
| [v2,3/7] ARM: mxs: convert m28evk board to device tree |
2012-07-10 |
Shawn Guo |
|
New |
| [v2,3/7] arm: sunxi: use the right clock phandles for UARTs |
2013-03-27 |
Emilio López |
|
New |
| [v2,3/7] spi/imx: do not use spi_imx2_3 to name SPI_IMX_VER_2_3 function and macro |
2011-07-09 |
Shawn Guo |
|
New |
| [v2,3/8] ARM i.MX6q: Add GPU, VPU, IPU, and OpenVG resets to System Reset Controller (SRC) |
2013-02-13 |
Philipp Zabel |
|
New |
| [v2,3/8] ARM: OMAP2+: hwmod: reorganize and document the setup process |
2012-02-28 |
Paul Walmsley |
|
New |
| [v2,30/34] ARM: imx: move debug macros to include/debug |
2012-09-20 |
Shawn Guo |
|
New |
