Patches

Show patches with: State = Action Required       |    Archived = No   
« 1 2 ... 28 29 30137 138 »
Patch A/R/T S/W/F Date Submitter Delegate State
[2/2] coresight: tmc: mark symbols static where possible - - - 0 0 0 2016-09-08 mathieu.poirier@linaro.org New
[2/2] crypto: sha1: add ARM NEON implementation - - - 0 0 0 2014-06-28 Jussi Kivilinna New
[2/2] dma: mv_xor: Use high_base mmio where appropriate - - - 0 0 0 2013-10-30 Ezequiel Garcia New
[2/2] ehci-imx25.c: use new flags from mxc_ehci.h in usb_hwinit - - - 0 0 0 2012-02-28 Torsten Mehnert New
[2/2] hwmon: mc13783-adc: Rename unit to indicate various MC13xxx chips support - - - 0 0 0 2013-06-05 Alexander Shiyan New
[2/2] i.MX27: Visstrim_M10: Add support for deinterlacing driver. - - - 0 0 0 2012-07-11 Javier Martin New
[2/2] imx6q: Set pwm control register during enable and config call - - - 0 0 0 2012-08-23 hachimi.samir@gmail.com New
[2/2] input: gt801_2plus1 - Add initial support for Goodix GT801 2+1 1 - - 0 0 0 2015-12-07 plaes@plaes.org New
[2/2] iommu/io-pgtable-arm: use __dma_sync_single_for_device() - - - 0 0 0 2016-05-08 Niklas Söderlund New
[2/2] irqchip/Layerscape: Add Layerscape MSI controller support - - - 0 0 0 2015-09-17 Minghuan Lian New
[2/2] ixp4xx_eth: Setup coherent_dma_mask - - - 0 0 0 2014-03-05 Krzysztof =?utf-8?Q?Ha=C5=82asa?= New
[2/2] leds/pwm: Don't disable pwm when setting brightness to 0 - - 1 0 0 0 2015-02-12 Uwe Kleine-König New
[2/2] memory: omap-gpmc: Add Kconfig option for debug - - 2 0 0 0 2016-01-05 Tony Lindgren New
[2/2] memory: omap-gpmc: expand the description of the debug facility 1 - - 0 0 0 2015-10-07 Tony Lindgren New
[2/2] memory: omap-gpmc: expand the description of the debug facility - - - 0 0 0 2015-10-06 Uwe Kleine-König New
[2/2] mtd: msm_nand: Add initial msm nand driver support. - - - 0 0 0 2011-03-01 Murali Nalajala New
[2/2] mtd: nand: driver for Conexant Digicolor NAND Flash Controller - - - 0 0 0 2015-02-12 Baruch Siach New
[2/2] mtd: spi-nor: make spi_nor_scan() take a chip type name, not spi_device_id - - - 0 0 0 2014-09-29 Rafał Miłecki New
[2/2] mx31moboard: Add MC13783 power button support - - - 0 0 0 2011-07-08 Philippe Rétornaz New
[2/2] mxs timer: decrease mxs_clockevent_device.min_delta_ns to 2 clock cycles - - - 0 0 0 2012-12-21 Torben Hohn New
[2/2] net: dsa: mv88e6xxx: Add 88E6176 device tree support - - - 0 0 0 2016-11-27 Andreas Färber New
[2/2] pcm038 lcdc support - - - 0 0 0 2012-05-18 Sascha Hauer New
[2/2] pwm: imx: support polarity inversion - - - 0 0 0 2014-01-13 Lothar Waßmann New
[2/2] regulator: rename function regulator_register_fixed - - - 0 0 0 2012-03-31 Shawn Guo New
[2/2] sched_clock: Disable seqlock lockdep usage in sched_clock - 1 - 0 0 0 2014-01-02 John Stultz New
[2/2] soc/rockchip: io-domain: add driver handling io domains - - - 0 0 0 2014-08-28 Doug Anderson New
[2/2] staging/iio/mxs-lradc: fix preenable for multiple buffers - - - 0 0 0 2013-05-04 Michał Mirosław New
[2/2] usb: fsl_mxc_udc.c: fix mxc_ahb_clk disable for i.MX25 - - - 0 0 0 2012-05-08 Eric Benard New
[2/2] video i.MX IPU: Fix display connections - - - 0 0 0 2011-12-01 Sascha Hauer New
[2/2] video: mxsfb: fix broken videomode selection - - - 0 0 0 2014-01-06 Lothar Waßmann New
[2/3,V2] phy/micrel: Rename KS80xx to KSZ80xx - - - 0 0 0 2012-09-21 Marek Vasut New
[2/3,V3] phy/micrel: Rename KS80xx to KSZ80xx - - - 0 0 0 2012-09-22 Marek Vasut New
[2/3,V4] phy/micrel: Rename KS80xx to KSZ80xx - - - 0 0 0 2012-09-24 Marek Vasut New
[2/3,i.MX6Q] Code cleanup & verification after fixing compilation error - - - 0 0 0 2016-08-19 Nitin Chaudhary New
[2/3,i.MX6Q] Code cleanup & verification after fixing compilation error - - - 0 0 0 2016-08-19 Nitin Chaudhary New
[2/3,v2] ARM: bcm2835: Add the Raspberry Pi firmware driver - - - 0 0 0 2015-05-13 Eric Anholt New
[2/3,v3] ARM: bcm2835: Add the Raspberry Pi firmware driver - - - 0 0 0 2015-05-18 Eric Anholt New
[2/3,v3] ARM: dts: exynos: Explicitly set dr_mode on arndale-octa - - - 0 0 0 2014-09-15 Sjoerd Simons New
[2/3] : Support cpu frequency scaling and power management for iMX6SL - - - 0 0 0 2013-12-17 John Tobias New
[2/3] ARM Coresight: Add address control support for ETM - - - 0 0 0 2013-12-04 Adrien Vergé New
[2/3] ARM i.MX pllv2: make round_rate accurate - - - 0 0 0 2012-06-04 Sascha Hauer New
[2/3] ARM i.MX25 clk: Fix nfc_ipg_per parent - - - 0 0 0 2012-10-10 Sascha Hauer New
[2/3] ARM i.MX6: Fix ethernet PLL clocks - - - 0 0 0 2012-11-22 Sascha Hauer New
[2/3] ARM i.MX6: Fix ethernet PLL clocks 1 - - 0 0 0 2012-11-22 Sascha Hauer New
[2/3] ARM i.MX: Merge i.MX5 support into mach-imx - - 2 0 0 0 2011-11-16 Sascha Hauer New
[2/3] ARM i.MX: Merge i.MX5 support into mach-imx - - - 0 0 0 2011-11-10 Sascha Hauer New
[2/3] ARM mxs: adjust pwm resources to what the driver expects 1 - - 0 0 0 2011-06-30 Sascha Hauer New
[2/3] ARM64: dts: amlogic: Add basic support for Amlogic S905X 1 1 - 0 0 0 2016-09-03 Neil Armstrong New
[2/3] ARM64: dts: amlogic: add Hardkernel ODROID-C2 - - - 0 0 0 2016-03-23 Kevin Hilman New
[2/3] ARM: Add KGDB/KDB FIQ debugger generic code - - - 0 0 0 2013-05-10 John Stultz New
[2/3] ARM: Add KGDB/KDB FIQ debugger generic code - - - 0 0 0 2013-01-07 Anton Vorontsov New
[2/3] ARM: BCM5301X: Add DT for Buffalo WXR-1900DHP - - - 0 0 0 2015-05-13 Rafał Miłecki New
[2/3] ARM: BCM5301X: Enable UART on Netgear R8000 - - - 0 0 0 2016-09-21 Rafał Miłecki New
[2/3] ARM: Make smp_init_cpus to return the number of cores - - - 0 0 0 2015-01-19 Daniel Lezcano New
[2/3] ARM: OMAP2+: Fix unused variable warning for am3517 crane - - - 0 0 0 2013-04-18 Tony Lindgren New
[2/3] ARM: OMAP3: Fix omap3_l3_block_irq warning when CONFIG_BUG is not set - - - 0 0 0 2012-06-06 Tony Lindgren New
[2/3] ARM: OMAP4+: hwmod code: remove clkdm requirement in _omap4_wait_target_*() - - - 0 0 0 2012-09-18 Paul Walmsley New
[2/3] ARM: OMAP4: Fix build error and warning in timer.c 2 - - 0 0 0 2012-11-28 Hunter, Jon New
[2/3] ARM: OMAP: Move omap2_init_common_devices out of init_early - - - 0 0 0 2011-08-24 Tony Lindgren New
[2/3] ARM: allow MULTIPLATFORM on no-MMU machines - - - 0 0 0 2013-09-30 Uwe Kleine-König New
[2/3] ARM: aspeed: Add defconfigs for CONFIG_ASPEED_BT_IPMI_HOST - - - 0 0 0 2016-08-31 Cédric Le Goater New
[2/3] ARM: at91/tclib: move initialization from alloc to probe 2 - - 0 0 0 2014-08-19 Gaël PORTAY New
[2/3] ARM: bcm2835: Add the Raspberry Pi firmware driver - - - 0 0 0 2015-04-27 Eric Anholt New
[2/3] ARM: bcm2835: add rpi power domain driver - - - 0 0 0 2015-11-19 Alexander Aring New
[2/3] ARM: convert platform hotplug inline assembly to C - - - 0 0 0 2013-01-17 Rob Herring New
[2/3] ARM: dts: document the berlin enable-method property - - - 0 0 0 2014-04-03 Antoine Ténart New
[2/3] ARM: dts: exynos: Add PMU to Exynos5410 - - - 0 0 0 2014-07-27 Andreas Färber New
[2/3] ARM: dts: exynos: Explicitly set dr_mode on arndale-octa - - - 0 0 0 2014-09-24 Sjoerd Simons New
[2/3] ARM: dts: imx25: don't configure reserved pad settings - - - 0 0 0 2016-07-05 Uwe Kleine-König New
[2/3] ARM: dts: imx6sx: Add UDOO Neo support - - - 0 0 0 2016-07-05 Andreas Färber New
[2/3] ARM: dts: imx6ul: add support for Ka-Ro electronics TXUL modules - - - 0 0 0 2016-01-12 Lothar Waßmann New
[2/3] ARM: dts: mbimxsd53 Add backlight and LCD regulator. - - - 0 0 0 2013-11-27 Denis Carikli New
[2/3] ARM: dts: mxs: Add a new pin config for the usb0 ID. - - - 0 0 0 2013-12-05 Denis Carikli New
[2/3] ARM: dts: sama5d4: add labels for watchdog and pinctrl nodes 2 - - 0 0 0 2016-01-20 Lothar Waßmann New
[2/3] ARM: i.MX1 clk: Add devicetree support - - - 0 0 0 2014-05-09 Alexander Shiyan New
[2/3] ARM: i.MX5x clocks: Fix parent for PWM clocks - - - 0 0 0 2012-07-10 Alexander Shiyan New
[2/3] ARM: i.MX6: add ethernet phy fixup for AR8031 - - - 0 0 0 2013-06-20 Sascha Hauer New
[2/3] ARM: i.MX: avic: Remove #ifdef CONFIG_PM - - - 0 0 0 2014-05-31 Alexander Shiyan New
[2/3] ARM: i.MX: tzic: Remove #ifdef CONFIG_PM - - - 0 0 0 2014-05-31 Alexander Shiyan New
[2/3] ARM: imx6: Make the LDB_DI0 and LDB_DI1 clocks read-only. - - - 0 0 0 2015-01-06 Philipp Zabel New
[2/3] ARM: imx6: rename pm-imx6q.c to pm-imx6.c - - - 0 0 0 2014-02-27 Shawn Guo New
[2/3] ARM: imx6: rework GPC to support mutiple power domains - - - 0 0 0 2015-11-23 Lucas Stach New
[2/3] ARM: imx6q: clock and Kconfig update for PCIe support - - - 0 0 0 2013-09-26 Shawn Guo New
[2/3] ARM: imx6q: switch to use pinctrl subsystem 1 - - 0 0 0 2012-05-02 Dong Aisheng New
[2/3] ARM: imx: Add imx5 cpuidle driver - - - 0 0 0 2012-04-16 Robert Lee New
[2/3] ARM: imx: Select GENERIC_ALLOCATOR - - - 0 0 0 2013-05-08 Shawn Guo New
[2/3] ARM: imx: Using proper clocks for RTC driver - - - 0 0 0 2013-06-16 Alexander Shiyan New
[2/3] ARM: imx: add common clock support for fixup mux - - - 0 0 0 2013-07-10 Shawn Guo New
[2/3] ARM: imx: add gpcv2 support - - - 0 0 0 2016-08-26 Anson Huang New
[2/3] ARM: imx: add missing include of linux/ftrace.h - - - 0 0 0 2011-10-08 Arnd Bergmann New
[2/3] ARM: imx: add suspend in ocram support on i.mx6dl - - - 0 0 0 2014-01-06 Anson Huang New
[2/3] ARM: imx: enable periphery well bias for suspend - - - 0 0 0 2013-03-20 Anson Huang New
[2/3] ARM: imx: mach-imx6ul: add imx6ull support - - - 0 0 0 2016-11-01 Peter Chen New
[2/3] ARM: imx: move clk_prepare() out from mxs_restart() - - - 0 0 0 2013-05-13 Shawn Guo New
[2/3] ARM: imx: pllv3 needs relock in .set_rate() call - - - 0 0 0 2013-11-01 Shawn Guo New
[2/3] ARM: imx: select HAVE_ARM_ARCH_TIMER if selected i.MX7D - - - 0 0 0 2015-12-10 Frank Li New
[2/3] ARM: mach-imx/scb9328: Make the UART gpio setup simpler - - - 0 0 0 2011-06-21 Fabio Estevam New
[2/3] ARM: mach-imx: mm-imx5: Retrieve tzic base address from dt - - - 0 0 0 2013-10-01 Fabio Estevam New
[2/3] ARM: make of_device_ids const 1 - - 0 0 0 2014-09-10 Uwe Kleine-König New
[2/3] ARM: mx25: Convert to a dt-only platform - - - 0 0 0 2015-03-06 Fabio Estevam New
« 1 2 ... 28 29 30137 138 »