| [0/7,v4] ARM: at91: dt: add USBA support |
2013-05-20 |
Jean-Christophe PLAGNIOL-VILLARD |
|
New |
| arm: kirkwood: convert NETGEAR ReadyNAS Duo v2 to use DT for the PCIe interface |
2013-05-28 |
Arnaud Ebalard |
|
New |
| [9/9] ARM: imx_v6_v7_defconfig: Enable imx-wm8962 by default |
2013-06-13 |
Nicolin Chen |
|
New |
| can: flexcan: allow compilation on arm and powerpc |
2013-05-16 |
Marc Kleine-Budde |
|
New |
| drm/i2c: nxp-tda998x: fix abort of some i2c exchanges |
2013-05-17 |
Jean-Francois Moine |
|
New |
| [2/2] ARM: imx: remove MLB PLL from pllv3 |
2013-05-17 |
jiada wang |
|
New |
| [v2] can: flexcan: remove HAVE_CAN_FLEXCAN Kconfig symbol |
2013-05-17 |
Marc Kleine-Budde |
|
New |
| ARM: imx6q: clk: add the eim_slow clock |
2013-05-17 |
Huang Shijie |
|
New |
| [2/2] ARM i.MX5: Add S/PDIF clocks |
2013-05-17 |
Philipp Zabel |
|
New |
| ARM: i.MX6: clk: add different DualLite MLB clock config |
2013-05-18 |
Dirk Behme |
|
New |
| [3/4] ARM: imx: clk-imx6q: AXI clock select index is incorrect |
2013-05-31 |
Anson Huang |
|
New |
| [v2,1/1] ARM: imx: clk-pllv3: change wait method for PLL lock |
2013-06-07 |
Peter Chen |
|
New |
| [1/2] ARM: imx6q: call of_clk_init() to register fixed rate clocks |
2013-05-21 |
Shawn Guo |
|
New |
| [2/2] ARM: imx6: use common of_clk_init() call to initialize clocks |
2013-05-21 |
Shawn Guo |
|
New |
| mxsfb: DATA_FORMAT_24_BIT flag outputs invalid colours |
2013-05-23 |
Hector Palacios |
|
New |
| [3/3] arm: imx: don't check for CONFIG_PHYLIB as builtin |
2013-05-27 |
Alexandre Belloni |
|
New |
| [v4,2/4] ARM: imx: add initial support for VF610 |
2013-05-28 |
Jingchang Lu |
|
New |
| [PATCHv2,3/3] arm: imx: don't check for CONFIG_PHYLIB as builtin |
2013-05-28 |
Alexandre Belloni |
|
New |
| [v6,06/10] ARM: imx: Export ac97 reset functions |
2013-05-28 |
Markus Pargmann |
|
New |
| arm: kirkwood: convert NETGEAR ReadyNAS Duo v2 to use DT for the PCIe interface |
2013-05-29 |
Jason |
|
New |
| [1/2] ARM: mxs: Print silicon version on boot |
2013-05-29 |
Fabio Estevam |
|
New |
| [2/2] ARM: mxs: Pass the system revision |
2013-05-29 |
Fabio Estevam |
|
New |
| 答复: A bug about system call on ARM |
2013-05-30 |
Wang, Yalin |
|
New |
| [2/2] ARM: imx6q: Mark VPU and IPU AXI transfers as cacheable, increase IPU priority |
2013-05-30 |
Markus Pargmann |
|
New |
| [v7,07/11] ARM: imx: Export ac97 reset functions |
2013-05-30 |
Markus Pargmann |
|
New |
| [1/4] ARM: imx: clk-imx6q: Add necessary clock nodes. |
2013-05-31 |
Anson Huang |
|
New |
| [2/4] ARM: imx: clk-imx6q: per1_bch's parent is wrong |
2013-05-31 |
Anson Huang |
|
New |
| [v2,1/2] ARM: mxs: Print silicon version on boot |
2013-05-31 |
Fabio Estevam |
|
New |
| [v2,2/2] ARM: mxs: Pass the system revision |
2013-05-31 |
Fabio Estevam |
|
New |
| [3/3] leds: leds-mc13783: Rename unit to indicate various MC13xxx chips support |
2013-06-03 |
Alexander Shiyan |
|
New |
| [4/5] arm: mxs: use the newly introduced of_set_mac_address() helper |
2013-06-05 |
Thomas Petazzoni |
|
New |
| [2/2] hwmon: mc13783-adc: Rename unit to indicate various MC13xxx chips support |
2013-06-05 |
Alexander Shiyan |
|
New |
| [v2,3/4] leds: leds-mc13783: Rename unit to indicate various MC13xxx chips support |
2013-06-05 |
Alexander Shiyan |
|
New |
| cpuidle: move ARCH_NEEDS_CPU_IDLE_COUPLED Kconfig option |
2013-06-05 |
Daniel Lezcano |
|
New |
| ARM: imx_v6_v7_defconfig: Enable PWW and backlight options |
2013-06-06 |
Fabio Estevam |
|
New |
| [1/1] ARM: imx: clk-pllv3: change wait method for PLL lock |
2013-06-06 |
Peter Chen |
|
New |
| [v3,2/2] leds: leds-mc13783: Add MC13892 LED support |
2013-06-09 |
Alexander Shiyan |
|
New |
| [v4,2/3] leds: leds-mc13783: Add MC13892 LED support |
2013-06-10 |
Alexander Shiyan |
|
New |
| [1/8] ARM: shmobile: sh73a0 pinmux platform device cleanup |
2013-06-11 |
Simon Horman |
|
New |
| [v2,3/3] arm: dt: zynq: Add support for the zed platform |
2013-06-12 |
Soren Brinkmann |
|
New |
| [1/9] ARM: clk-imx6qdl: Add clko1 configuration for imx6qdl-sabresd |
2013-06-13 |
Nicolin Chen |
|
New |
| [v4,1/2] ARM: dts: omap3-beagle-xm: Add USB Host support |
2013-06-13 |
Roger Quadros |
|
New |
| [RFC] Staging: imx-drm: Do not use fractional part of divider |
2013-06-14 |
Alexander Shiyan |
|
New |
| ARM: imx: Add RTC support for i.MX27 |
2013-06-15 |
Alexander Shiyan |
|
New |
| [2/3] ARM: imx: Using proper clocks for RTC driver |
2013-06-16 |
Alexander Shiyan |
|
New |
| [v8,07/11] ARM: imx: Export ac97 reset functions |
2013-06-16 |
Markus Pargmann |
|
New |
| [PATCHv2] ARM: sunxi: Add Olimex A10s-Olinuxino-micro device tree |
2013-06-17 |
Maxime Ripard |
|
New |
| clk/zynq/clkc: Add dedicated spinlock for the SWDT |
2013-06-17 |
Soren Brinkmann |
|
New |
| [RFC,5/6] ARM: dts: omap3beagle-xm: Add idle state pins for USB host |
2013-06-19 |
Roger Quadros |
|
New |
| [GIT,PULL,2/7] Samsung cleanup-3 for v3.8 |
2012-11-28 |
Kukjin Kim |
|
New |
| [6/6] mc13xxx: remove unused define |
2011-07-21 |
Philippe Rétornaz |
|
New |
| [5/6] mc13xxx: remove obsolete leds and regualtors flags |
2011-07-21 |
Philippe Rétornaz |
|
New |
| [GIT,PULL,11/12] ARM: soc: documentation updates |
2012-10-01 |
Olof Johansson |
|
New |
| [GIT,PULL,10/12] ARM: soc: device tree updates, take 2 |
2012-10-01 |
Olof Johansson |
|
New |
| [GIT,PULL,9/12] ARM: soc: board specific updates |
2012-10-01 |
Olof Johansson |
|
New |
| [GIT,PULL,8/12] ARM: soc: driver specific changes |
2012-10-01 |
Olof Johansson |
|
New |
| [GIT,PULL,5/12] ARM: soc: device tree updates |
2012-10-01 |
Olof Johansson |
|
New |
| [GIT,PULL,2/12] ARM: soc: general cleanups |
2012-10-01 |
Olof Johansson |
|
New |
| [v4,5/7] ARM: mxs: add usb platform operations |
2011-08-02 |
Tony Lin |
|
New |
| [GIT,PULL,12/12] ARM: soc: multiplatform enablement |
2012-10-01 |
Olof Johansson |
|
New |
| [GIT,PULL,4/12] ARM: soc: soc-specific updates |
2012-10-01 |
Olof Johansson |
|
New |
| [v4,6/7] ARM: mxs: add usb platform operations |
2011-08-02 |
Tony Lin |
|
New |
| [GIT,PULL,7/12] ARM: soc: soc-specific updates, take 2 |
2012-10-01 |
Olof Johansson |
|
New |
| [V2,1/3] dmaengine: at_hdmac: replace spin_lock* with irqsave variants |
2011-07-27 |
Nicolas Ferre |
|
New |
| [GIT,PULL,6/12] ARM: soc: cleanups, part 2 |
2012-10-01 |
Olof Johansson |
|
New |
| [v4,3/7] ARM: mxs: add usb clocks to clock tree |
2011-08-02 |
Tony Lin |
|
New |
| [GIT,PULL,1/12] ARM: soc: non-critical bug fixes |
2012-10-01 |
Olof Johansson |
|
New |
| [GIT,PULL,3/12] ARM: soc: MAINTAINERS updates |
2012-10-01 |
Olof Johansson |
|
New |
| [V2,2/3] dmaengine: at_hdmac: improve power management routines |
2011-07-27 |
Nicolas Ferre |
|
New |
| [4/6] mc13xxx: remove unused define |
2011-07-21 |
Philippe Rétornaz |
|
New |
| ARM: imx: pwm: Add support for MX53 |
2011-08-23 |
Fabio Estevam |
|
New |
| ARM imx51: Add Armadeus systems APF51 support |
2011-10-13 |
julien.boibessot@free.fr |
|
New |
| i.MX multi SoC patches |
2011-08-24 |
Hector Oron |
|
New |
| [GIT,PULL] at91: fixes for 3.8-rc6 |
2013-01-30 |
Nicolas Ferre |
|
New |
| [6/6] mx31moboard: Add MC13783 power button support |
2011-07-21 |
Philippe Rétornaz |
|
New |
| [6/7] add macro definitions according to ehci-mxc driver change |
2011-07-20 |
Tony Lin |
|
New |
| [1/7] consolidate definitions and structures to share among platforms |
2011-07-20 |
Tony Lin |
|
New |
| [2/7] enable usb1 phy power supply |
2011-07-20 |
Tony Lin |
|
New |
| [3/7] add usb phy clocks to clock tree |
2011-07-20 |
Tony Lin |
|
New |
| [2/6] ARM: mx25: Print silicon revision on boot |
2011-08-23 |
Jason Liu |
|
New |
| [v4,07/10] ARM: mxs: add sgtl5000 i2c device |
2011-07-20 |
Dong Aisheng |
|
New |
| [v3,6/6] ARM: mxs: add usb host function to default config |
2011-07-27 |
Tony Lin |
|
New |
| [v3,5/6] ARM: mxs: add usb phy operations |
2011-07-27 |
Tony Lin |
|
New |
| [GIT,PULL,3.2] Please pull tegra boards for 3.2 |
2011-08-14 |
Olof Johansson |
|
New |
| [GIT,PULL] i.mx driver device tree patches for 3.1 |
2011-07-27 |
Shawn Guo |
|
New |
| ARM: mx5: Enable HIGHMEM |
2011-08-24 |
Fabio Estevam |
|
New |
| ARM: imx6q: generate imx6q dtb files |
2011-12-07 |
Eric Miao |
|
New |
| [GIT,PULL] pxa changes for v3.3 |
2011-12-13 |
Haojian Zhuang |
|
New |
| [v4,07/10] ARM: mxs: add sgtl5000 i2c device |
2011-07-19 |
Dong Aisheng |
|
New |
| ARM: mx5: Select CONFIG_VMSPLIT_2G option |
2011-08-24 |
Fabio Estevam |
|
New |
| [resend,1/1] ARM: i.MX28: shift frac value in _CLK_SET_RATE |
2011-10-17 |
Matt Burtch |
|
New |
| [11/10] arm: mxs: mx28evk: add fixed regulators for audio |
2011-07-18 |
Wolfram Sang |
|
New |
| [GIT,PULL] omap fixes for -rc series and merge window |
2011-10-03 |
Tony Lindgren |
|
New |
| [1/1] ARM: imx6q: move clock register map to machine_desc.map_io |
2011-11-17 |
Richard Zhao |
|
New |
| [GIT,PULL] i.MX features for next |
2011-08-23 |
Sascha Hauer |
|
New |
| [GIT,PULL] i.MX cleanups for next |
2011-08-23 |
Sascha Hauer |
|
New |
| [GIT,PULL] OMAP: clock/powerdomain/clockdomain/hwmod: fixes for 3.1-rc |
2011-08-23 |
Paul Walmsley |
|
New |
| [GIT,PULL] enable multiplatform support for omap2+ for v3.9 |
2013-01-10 |
Tony Lindgren |
|
New |
| [ARM] APF9328 needs CONFIG_MTD_CFI_INTELEXT to boot on its NOR FLASH. |
2011-11-17 |
Gwenhael Goavec-Merou |
|
New |
| UART: add CSR SiRFprimaII SoC on-chip uart drivers |
2011-10-13 |
Barry Song |
|
New |