diff mbox series

[v4,5/5] arm64: dts: rockchip: rk3588: add SATA support

Message ID 20230612171337.74576-6-sebastian.reichel@collabora.com
State New
Headers show
Series Add RK3588 SATA support | expand

Commit Message

Sebastian Reichel June 12, 2023, 5:13 p.m. UTC 
Add all three SATA IP blocks to the RK3588 DT.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588.dtsi  | 23 +++++++++++
 arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 48 +++++++++++++++++++++++
 2 files changed, 71 insertions(+)

Comments

Damien Le Moal June 18, 2023, 3:10 a.m. UTC | #1 
On 6/13/23 02:13, Sebastian Reichel wrote:
> Add all three SATA IP blocks to the RK3588 DT.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

This patch does not apply to libata for-6.5 branch. What is it based on ?
Heiko Stuebner June 18, 2023, 8:13 a.m. UTC | #2 
Hi Damien,

Am Sonntag, 18. Juni 2023, 05:10:58 CEST schrieb Damien Le Moal:
> On 6/13/23 02:13, Sebastian Reichel wrote:
> > Add all three SATA IP blocks to the RK3588 DT.
> > 
> > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> 
> This patch does not apply to libata for-6.5 branch. What is it based on ?

I guess probably either mainline or my dts-branch [0] .

Most of the time we have series doing driver changes + devicetree changes
where subsystem maintainers pick the driver + binding patches 
(1-3 in this case) and after that I pick the devicetree changes (4-5 here).


Heiko


[0] https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v6.5-armsoc/dts64
Damien Le Moal June 18, 2023, 11:41 a.m. UTC | #3 
On 6/18/23 17:13, Heiko Stübner wrote:
> Hi Damien,
> 
> Am Sonntag, 18. Juni 2023, 05:10:58 CEST schrieb Damien Le Moal:
>> On 6/13/23 02:13, Sebastian Reichel wrote:
>>> Add all three SATA IP blocks to the RK3588 DT.
>>>
>>> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
>>
>> This patch does not apply to libata for-6.5 branch. What is it based on ?
> 
> I guess probably either mainline or my dts-branch [0] .
> 
> Most of the time we have series doing driver changes + devicetree changes
> where subsystem maintainers pick the driver + binding patches 
> (1-3 in this case) and after that I pick the devicetree changes (4-5 here).

OK. I will queue 1-3 only then. Please pickup 4 & 5.
Thanks !

> 
> 
> Heiko
> 
> 
> [0] https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip.git/log/?h=v6.5-armsoc/dts64
> 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
index 9d8539b5309b..b9508cea34f1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
@@ -129,6 +129,29 @@  gmac0_mtl_tx_setup: tx-queues-config {
 		};
 	};
 
+	sata1: sata@fe220000 {
+		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfe220000 0 0x1000>;
+		clocks = <&cru ACLK_SATA1>, <&cru CLK_PMALIVE1>,
+			 <&cru CLK_RXOOB1>, <&cru CLK_PIPEPHY1_REF>,
+			 <&cru CLK_PIPEPHY1_PIPE_ASIC_G>;
+		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+		interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH 0>;
+		ports-implemented = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		sata-port@0 {
+			reg = <0>;
+			hba-port-cap = <HBA_PORT_FBSCP>;
+			phys = <&combphy1_ps PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			snps,rx-ts-max = <32>;
+			snps,tx-ts-max = <32>;
+		};
+	};
+
 	combphy1_ps: phy@fee10000 {
 		compatible = "rockchip,rk3588-naneng-combphy";
 		reg = <0x0 0xfee10000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
index 45ae457a22a4..00a91b08e3bb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s.dtsi
@@ -9,6 +9,8 @@ 
 #include <dt-bindings/power/rk3588-power.h>
 #include <dt-bindings/reset/rockchip,rk3588-cru.h>
 #include <dt-bindings/thermal/thermal.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/ata/ahci.h>
 
 / {
 	compatible = "rockchip,rk3588";
@@ -1717,6 +1719,52 @@  gmac1_mtl_tx_setup: tx-queues-config {
 		};
 	};
 
+	sata0: sata@fe210000 {
+		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfe210000 0 0x1000>;
+		clocks = <&cru ACLK_SATA0>, <&cru CLK_PMALIVE0>,
+			 <&cru CLK_RXOOB0>, <&cru CLK_PIPEPHY0_REF>,
+			 <&cru CLK_PIPEPHY0_PIPE_ASIC_G>;
+		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+		interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH 0>;
+		ports-implemented = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		sata-port@0 {
+			reg = <0>;
+			hba-port-cap = <HBA_PORT_FBSCP>;
+			phys = <&combphy0_ps PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			snps,rx-ts-max = <32>;
+			snps,tx-ts-max = <32>;
+		};
+	};
+
+	sata2: sata@fe230000 {
+		compatible = "rockchip,rk3588-dwc-ahci", "snps,dwc-ahci";
+		reg = <0 0xfe230000 0 0x1000>;
+		clocks = <&cru ACLK_SATA2>, <&cru CLK_PMALIVE2>,
+			 <&cru CLK_RXOOB2>, <&cru CLK_PIPEPHY2_REF>,
+			 <&cru CLK_PIPEPHY2_PIPE_ASIC_G>;
+		clock-names = "sata", "pmalive", "rxoob", "ref", "asic";
+		interrupts = <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH 0>;
+		ports-implemented = <0x1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+
+		sata-port@0 {
+			reg = <0>;
+			hba-port-cap = <HBA_PORT_FBSCP>;
+			phys = <&combphy2_psu PHY_TYPE_SATA>;
+			phy-names = "sata-phy";
+			snps,rx-ts-max = <32>;
+			snps,tx-ts-max = <32>;
+		};
+	};
+
 	sdmmc: mmc@fe2c0000 {
 		compatible = "rockchip,rk3588-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x0 0xfe2c0000 0x0 0x4000>;