| Message ID | 20211120033420.3762681-2-libaokun1@huawei.com |
|---|---|
| State | New |
| Headers | show |
| Series | fix two bugs when trying rmmod sata_fsl | expand |
Hello! On 20.11.2021 6:34, Baokun Li wrote: > When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, > a bug is reported: > ================================================================== > BUG: Unable to handle kernel data access on read at 0x80000800805b502c > Oops: Kernel access of bad area, sig: 11 [#1] > NIP [c0000000000388a4] .ioread32+0x4/0x20 > LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] > Call Trace: > .free_irq+0x1c/0x4e0 (unreliable) > .ata_host_stop+0x74/0xd0 [libata] > .release_nodes+0x330/0x3f0 > .device_release_driver_internal+0x178/0x2c0 > .driver_detach+0x64/0xd0 > .bus_remove_driver+0x70/0xf0 > .driver_unregister+0x38/0x80 > .platform_driver_unregister+0x14/0x30 > .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] > .__se_sys_delete_module+0x1ec/0x2d0 > .system_call_exception+0xfc/0x1f0 > system_call_common+0xf8/0x200 > ================================================================== > > The triggering of the BUG is shown in the following stack: > > driver_detach > device_release_driver_internal > __device_release_driver > drv->remove(dev) --> platform_drv_remove/platform_remove > drv->remove(dev) --> sata_fsl_remove > iounmap(host_priv->hcr_base); <---- unmap > kfree(host_priv); <---- free > devres_release_all > release_nodes > dr->node.release(dev, dr->data) --> ata_host_stop > ap->ops->port_stop(ap) --> sata_fsl_port_stop > ioread32(hcr_base + HCONTROL) <---- UAF > host->ops->host_stop(host) > > The iounmap(host_priv->hcr_base) and kfree(host_priv) commands should s/commands/functions/? > not be executed in drv->remove. These commands should be executed in > host_stop after port_stop. Therefore, we move these commands to the > new function sata_fsl_host_stop and bind the new function to host_stop > by referring to achi. You mean AHCI? I don't see where you reference ahci (or achi)... > Reported-by: Hulk Robot <hulkci@huawei.com> > Signed-off-by: Baokun Li <libaokun1@huawei.com> Doesn't this need to go into the stable trees? > --- > drivers/ata/sata_fsl.c | 17 ++++++++++++++--- > 1 file changed, 14 insertions(+), 3 deletions(-) > > diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c > index e5838b23c9e0..30759fd1c3a2 100644 > --- a/drivers/ata/sata_fsl.c > +++ b/drivers/ata/sata_fsl.c > @@ -1430,12 +1430,25 @@ static struct ata_port_operations sata_fsl_ops = { > .pmp_detach = sata_fsl_pmp_detach, > }; > > +static void sata_fsl_host_stop(struct ata_host *host) > +{ > + struct sata_fsl_host_priv *host_priv = host->private_data; > + > + iounmap(host_priv->hcr_base); > + kfree(host_priv); > +} > + > +static struct ata_port_operations sata_fsl_platform_ops = { > + .inherits = &sata_fsl_ops, > + .host_stop = sata_fsl_host_stop, Why not just add it to the initializer for sata_fsl_ops? [...] MBR, Sergei
On 2021/11/22 11:03, libaokun (A) wrote: > 在 2021/11/20 20:01, Sergei Shtylyov 写道: >> Hello! >> >> On 20.11.2021 6:34, Baokun Li wrote: >> >>> When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, >>> a bug is reported: >>> ================================================================== >>> BUG: Unable to handle kernel data access on read at 0x80000800805b502c >>> Oops: Kernel access of bad area, sig: 11 [#1] >>> NIP [c0000000000388a4] .ioread32+0x4/0x20 >>> LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] >>> Call Trace: >>> .free_irq+0x1c/0x4e0 (unreliable) >>> .ata_host_stop+0x74/0xd0 [libata] >>> .release_nodes+0x330/0x3f0 >>> .device_release_driver_internal+0x178/0x2c0 >>> .driver_detach+0x64/0xd0 >>> .bus_remove_driver+0x70/0xf0 >>> .driver_unregister+0x38/0x80 >>> .platform_driver_unregister+0x14/0x30 >>> .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] >>> .__se_sys_delete_module+0x1ec/0x2d0 >>> .system_call_exception+0xfc/0x1f0 >>> system_call_common+0xf8/0x200 >>> ================================================================== >>> >>> The triggering of the BUG is shown in the following stack: >>> >>> driver_detach >>> device_release_driver_internal >>> __device_release_driver >>> drv->remove(dev) --> platform_drv_remove/platform_remove >>> drv->remove(dev) --> sata_fsl_remove >>> iounmap(host_priv->hcr_base); <---- unmap >>> kfree(host_priv); <---- free >>> devres_release_all >>> release_nodes >>> dr->node.release(dev, dr->data) --> ata_host_stop >>> ap->ops->port_stop(ap) --> sata_fsl_port_stop >>> ioread32(hcr_base + HCONTROL) <---- UAF >>> host->ops->host_stop(host) >>> >>> The iounmap(host_priv->hcr_base) and kfree(host_priv) commands should >> >> s/commands/functions/? > > OK! I'm going to modify this in V3. > > >> >>> not be executed in drv->remove. These commands should be executed in >>> host_stop after port_stop. Therefore, we move these commands to the >>> new function sata_fsl_host_stop and bind the new function to host_stop >>> by referring to achi. >> >> You mean AHCI? I don't see where you reference ahci (or achi)... > > Yes, it's AHCI, I'm sorry for a spelling error here.. > > ahci_platform_ops in drivers/ata/libahci_platform.c > > >> >>> Reported-by: Hulk Robot <hulkci@huawei.com> >>> Signed-off-by: Baokun Li <libaokun1@huawei.com> >> >> Doesn't this need to go into the stable trees? > > > I felt it was needed because the bug was triggered in a very simple way, > > although PPC linux is rare these days. > > And I will add > > Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller"). Also add: Cc: stable@vger.kernel.org > >> >>> --- >>> drivers/ata/sata_fsl.c | 17 ++++++++++++++--- >>> 1 file changed, 14 insertions(+), 3 deletions(-) >>> >>> diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c >>> index e5838b23c9e0..30759fd1c3a2 100644 >>> --- a/drivers/ata/sata_fsl.c >>> +++ b/drivers/ata/sata_fsl.c >>> @@ -1430,12 +1430,25 @@ static struct ata_port_operations sata_fsl_ops = { >>> .pmp_detach = sata_fsl_pmp_detach, >>> }; >>> +static void sata_fsl_host_stop(struct ata_host *host) >>> +{ >>> + struct sata_fsl_host_priv *host_priv = host->private_data; >>> + >>> + iounmap(host_priv->hcr_base); >>> + kfree(host_priv); >>> +} >>> + >>> +static struct ata_port_operations sata_fsl_platform_ops = { >>> + .inherits = &sata_fsl_ops, >>> + .host_stop = sata_fsl_host_stop, >> >> Why not just add it to the initializer for sata_fsl_ops? > > > This is the AHCI of the reference. > > Most ATA drivers add host_stop to to the initializer for xxx_platform_ops, > > such as ahci_platform_ops, ahci_brcm_platform_ops, and ahci_imx_ops. > > It feels like this separates the port operation from the host operation, > > making the hierarchy of the code clearer. > > >> >> [...] >> >> MBR, Sergei >> . > > > Thank you very much for your advice. > > If there's nothing else to modify, I'll send a patch V3. > > -- > With Best Regards, > Baokun Li > . >
在 2021/11/22 10:33, Damien Le Moal 写道: > On 2021/11/22 11:03, libaokun (A) wrote: >> 在 2021/11/20 20:01, Sergei Shtylyov 写道: >>> Hello! >>> >>> On 20.11.2021 6:34, Baokun Li wrote: >>> >>>> When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, >>>> a bug is reported: >>>> ================================================================== >>>> BUG: Unable to handle kernel data access on read at 0x80000800805b502c >>>> Oops: Kernel access of bad area, sig: 11 [#1] >>>> NIP [c0000000000388a4] .ioread32+0x4/0x20 >>>> LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] >>>> Call Trace: >>>> .free_irq+0x1c/0x4e0 (unreliable) >>>> .ata_host_stop+0x74/0xd0 [libata] >>>> .release_nodes+0x330/0x3f0 >>>> .device_release_driver_internal+0x178/0x2c0 >>>> .driver_detach+0x64/0xd0 >>>> .bus_remove_driver+0x70/0xf0 >>>> .driver_unregister+0x38/0x80 >>>> .platform_driver_unregister+0x14/0x30 >>>> .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] >>>> .__se_sys_delete_module+0x1ec/0x2d0 >>>> .system_call_exception+0xfc/0x1f0 >>>> system_call_common+0xf8/0x200 >>>> ================================================================== >>>> >>>> The triggering of the BUG is shown in the following stack: >>>> >>>> driver_detach >>>> device_release_driver_internal >>>> __device_release_driver >>>> drv->remove(dev) --> platform_drv_remove/platform_remove >>>> drv->remove(dev) --> sata_fsl_remove >>>> iounmap(host_priv->hcr_base); <---- unmap >>>> kfree(host_priv); <---- free >>>> devres_release_all >>>> release_nodes >>>> dr->node.release(dev, dr->data) --> ata_host_stop >>>> ap->ops->port_stop(ap) --> sata_fsl_port_stop >>>> ioread32(hcr_base + HCONTROL) <---- UAF >>>> host->ops->host_stop(host) >>>> >>>> The iounmap(host_priv->hcr_base) and kfree(host_priv) commands should >>> s/commands/functions/? >> OK! I'm going to modify this in V3. >> >> >>>> not be executed in drv->remove. These commands should be executed in >>>> host_stop after port_stop. Therefore, we move these commands to the >>>> new function sata_fsl_host_stop and bind the new function to host_stop >>>> by referring to achi. >>> You mean AHCI? I don't see where you reference ahci (or achi)... >> Yes, it's AHCI, I'm sorry for a spelling error here.. >> >> ahci_platform_ops in drivers/ata/libahci_platform.c >> >> >>>> Reported-by: Hulk Robot <hulkci@huawei.com> >>>> Signed-off-by: Baokun Li <libaokun1@huawei.com> >>> Doesn't this need to go into the stable trees? >> >> I felt it was needed because the bug was triggered in a very simple way, >> >> although PPC linux is rare these days. >> >> And I will add >> >> Fixes: faf0b2e5afe7 ("drivers/ata: add support to Freescale 3.0Gbps SATA Controller"). > Also add: > > Cc: stable@vger.kernel.org > > >>>> --- >>>> drivers/ata/sata_fsl.c | 17 ++++++++++++++--- >>>> 1 file changed, 14 insertions(+), 3 deletions(-) >>>> >>>> diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c >>>> index e5838b23c9e0..30759fd1c3a2 100644 >>>> --- a/drivers/ata/sata_fsl.c >>>> +++ b/drivers/ata/sata_fsl.c >>>> @@ -1430,12 +1430,25 @@ static struct ata_port_operations sata_fsl_ops = { >>>> .pmp_detach = sata_fsl_pmp_detach, >>>> }; >>>> +static void sata_fsl_host_stop(struct ata_host *host) >>>> +{ >>>> + struct sata_fsl_host_priv *host_priv = host->private_data; >>>> + >>>> + iounmap(host_priv->hcr_base); >>>> + kfree(host_priv); >>>> +} >>>> + >>>> +static struct ata_port_operations sata_fsl_platform_ops = { >>>> + .inherits = &sata_fsl_ops, >>>> + .host_stop = sata_fsl_host_stop, >>> Why not just add it to the initializer for sata_fsl_ops? >> >> This is the AHCI of the reference. >> >> Most ATA drivers add host_stop to to the initializer for xxx_platform_ops, >> >> such as ahci_platform_ops, ahci_brcm_platform_ops, and ahci_imx_ops. >> >> It feels like this separates the port operation from the host operation, >> >> making the hierarchy of the code clearer. >> >> >>> [...] >>> >>> MBR, Sergei >>> . >> >> Thank you very much for your advice. >> >> If there's nothing else to modify, I'll send a patch V3. >> >> -- >> With Best Regards, >> Baokun Li >> . >> > Thank you very much for your advice. I'm about to send a patch V3 with the changes suggested by you.
Hello! On 22.11.2021 5:03, libaokun (A) wrote: >>> When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, >>> a bug is reported: >>> ================================================================== >>> BUG: Unable to handle kernel data access on read at 0x80000800805b502c >>> Oops: Kernel access of bad area, sig: 11 [#1] >>> NIP [c0000000000388a4] .ioread32+0x4/0x20 >>> LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] >>> Call Trace: >>> .free_irq+0x1c/0x4e0 (unreliable) >>> .ata_host_stop+0x74/0xd0 [libata] >>> .release_nodes+0x330/0x3f0 >>> .device_release_driver_internal+0x178/0x2c0 >>> .driver_detach+0x64/0xd0 >>> .bus_remove_driver+0x70/0xf0 >>> .driver_unregister+0x38/0x80 >>> .platform_driver_unregister+0x14/0x30 >>> .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] >>> .__se_sys_delete_module+0x1ec/0x2d0 >>> .system_call_exception+0xfc/0x1f0 >>> system_call_common+0xf8/0x200 >>> ================================================================== >>> >>> The triggering of the BUG is shown in the following stack: >>> >>> driver_detach >>> device_release_driver_internal >>> __device_release_driver >>> drv->remove(dev) --> platform_drv_remove/platform_remove >>> drv->remove(dev) --> sata_fsl_remove >>> iounmap(host_priv->hcr_base); <---- unmap >>> kfree(host_priv); <---- free >>> devres_release_all >>> release_nodes >>> dr->node.release(dev, dr->data) --> ata_host_stop >>> ap->ops->port_stop(ap) --> sata_fsl_port_stop >>> ioread32(hcr_base + HCONTROL) <---- UAF >>> host->ops->host_stop(host) >>> >>> The iounmap(host_priv->hcr_base) and kfree(host_priv) commands should >> >> s/commands/functions/? > > OK! I'm going to modify this in V3. > >> >>> not be executed in drv->remove. These commands should be executed in >>> host_stop after port_stop. Therefore, we move these commands to the >>> new function sata_fsl_host_stop and bind the new function to host_stop >>> by referring to achi. >> >> You mean AHCI? I don't see where you reference ahci (or achi)... > > Yes, it's AHCI, I'm sorry for a spelling error here.. > > ahci_platform_ops in drivers/ata/libahci_platform.c You should have (at least) written "the AHCI platform driver"... [...] >>> diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c >>> index e5838b23c9e0..30759fd1c3a2 100644 >>> --- a/drivers/ata/sata_fsl.c >>> +++ b/drivers/ata/sata_fsl.c >>> @@ -1430,12 +1430,25 @@ static struct ata_port_operations sata_fsl_ops = { >>> .pmp_detach = sata_fsl_pmp_detach, >>> }; >>> +static void sata_fsl_host_stop(struct ata_host *host) >>> +{ >>> + struct sata_fsl_host_priv *host_priv = host->private_data; >>> + >>> + iounmap(host_priv->hcr_base); >>> + kfree(host_priv); >>> +} >>> + >>> +static struct ata_port_operations sata_fsl_platform_ops = { >>> + .inherits = &sata_fsl_ops, >>> + .host_stop = sata_fsl_host_stop, >> >> Why not just add it to the initializer for sata_fsl_ops? > > This is the AHCI of the reference. > > Most ATA drivers add host_stop to to the initializer for xxx_platform_ops, Most? Even if so, I guess they add it this way because they're in the separate modules with the ops they inherit -- in this case it's not so. > such as ahci_platform_ops, ahci_brcm_platform_ops, and ahci_imx_ops. Note that these are all AHCI drivers, not just (more general) ATA. > It feels like this separates the port operation from the host operation, Why separate them? The 'struct ata_port_operations' embraces many different aspects of ATA, the arguments do not always include a 'struct *ata_port' (I don't quite like that part in libata). > making the hierarchy of the code clearer. Clear as mud. In your case, there's no separate modules in play, so blindly parroting what the AHCI platform drivers do gives you nothing but memory waste... :-( >> [...] >> >> MBR, Sergei >> . > > > Thank you very much for your advice. You're welcome. :-) > If there's nothing else to modify, I'll send a patch V3. Please use a single structure, it's already large enough to have 2 of them in the same module for no good reason. > -- > With Best Regards, > Baokun Li MBR, Sergei
在 2021/11/23 2:58, Sergei Shtylyov 写道: > Hello! > > On 22.11.2021 5:03, libaokun (A) wrote: > >>>> When the `rmmod sata_fsl.ko` command is executed in the PPC64 >>>> GNU/Linux, >>>> a bug is reported: >>>> ================================================================== >>>> BUG: Unable to handle kernel data access on read at >>>> 0x80000800805b502c >>>> Oops: Kernel access of bad area, sig: 11 [#1] >>>> NIP [c0000000000388a4] .ioread32+0x4/0x20 >>>> LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] >>>> Call Trace: >>>> .free_irq+0x1c/0x4e0 (unreliable) >>>> .ata_host_stop+0x74/0xd0 [libata] >>>> .release_nodes+0x330/0x3f0 >>>> .device_release_driver_internal+0x178/0x2c0 >>>> .driver_detach+0x64/0xd0 >>>> .bus_remove_driver+0x70/0xf0 >>>> .driver_unregister+0x38/0x80 >>>> .platform_driver_unregister+0x14/0x30 >>>> .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] >>>> .__se_sys_delete_module+0x1ec/0x2d0 >>>> .system_call_exception+0xfc/0x1f0 >>>> system_call_common+0xf8/0x200 >>>> ================================================================== >>>> >>>> The triggering of the BUG is shown in the following stack: >>>> >>>> driver_detach >>>> device_release_driver_internal >>>> __device_release_driver >>>> drv->remove(dev) --> platform_drv_remove/platform_remove >>>> drv->remove(dev) --> sata_fsl_remove >>>> iounmap(host_priv->hcr_base); <---- unmap >>>> kfree(host_priv); <---- free >>>> devres_release_all >>>> release_nodes >>>> dr->node.release(dev, dr->data) --> ata_host_stop >>>> ap->ops->port_stop(ap) --> sata_fsl_port_stop >>>> ioread32(hcr_base + HCONTROL) <---- UAF >>>> host->ops->host_stop(host) >>>> >>>> The iounmap(host_priv->hcr_base) and kfree(host_priv) commands should >>> >>> s/commands/functions/? >> >> OK! I'm going to modify this in V3. >> >>> >>>> not be executed in drv->remove. These commands should be executed in >>>> host_stop after port_stop. Therefore, we move these commands to the >>>> new function sata_fsl_host_stop and bind the new function to host_stop >>>> by referring to achi. >>> >>> You mean AHCI? I don't see where you reference ahci (or achi)... >> >> Yes, it's AHCI, I'm sorry for a spelling error here.. >> >> ahci_platform_ops in drivers/ata/libahci_platform.c > > You should have (at least) written "the AHCI platform driver"... > > [...] >>>> diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c >>>> index e5838b23c9e0..30759fd1c3a2 100644 >>>> --- a/drivers/ata/sata_fsl.c >>>> +++ b/drivers/ata/sata_fsl.c >>>> @@ -1430,12 +1430,25 @@ static struct ata_port_operations >>>> sata_fsl_ops = { >>>> .pmp_detach = sata_fsl_pmp_detach, >>>> }; >>>> +static void sata_fsl_host_stop(struct ata_host *host) >>>> +{ >>>> + struct sata_fsl_host_priv *host_priv = host->private_data; >>>> + >>>> + iounmap(host_priv->hcr_base); >>>> + kfree(host_priv); >>>> +} >>>> + >>>> +static struct ata_port_operations sata_fsl_platform_ops = { >>>> + .inherits = &sata_fsl_ops, >>>> + .host_stop = sata_fsl_host_stop, >>> >>> Why not just add it to the initializer for sata_fsl_ops? >> >> This is the AHCI of the reference. >> >> Most ATA drivers add host_stop to to the initializer for >> xxx_platform_ops, > > Most? Even if so, I guess they add it this way because they're in > the separate modules with the ops they inherit -- in this case it's > not so. > >> such as ahci_platform_ops, ahci_brcm_platform_ops, and ahci_imx_ops. > > Note that these are all AHCI drivers, not just (more general) ATA. > >> It feels like this separates the port operation from the host operation, > > Why separate them? The 'struct ata_port_operations' embraces many > different aspects of ATA, the arguments do not always include a > 'struct *ata_port' (I don't quite like that part in libata). > >> making the hierarchy of the code clearer. > > Clear as mud. In your case, there's no separate modules in play, so > blindly parroting what the AHCI platform drivers do gives you nothing > but memory waste... :-( > >>> [...] >>> >>> MBR, Sergei >>> . >> >> >> Thank you very much for your advice. > > You're welcome. :-) > >> If there's nothing else to modify, I'll send a patch V3. > > Please use a single structure, it's already large enough to have 2 > of them in the same module for no good reason. > >> -- >> With Best Regards, >> Baokun Li > > MBR, Sergei > . Thank you very much for your advice. I'm about to send a patch V4 with the changes suggested by you.
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index e5838b23c9e0..30759fd1c3a2 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1430,12 +1430,25 @@ static struct ata_port_operations sata_fsl_ops = { .pmp_detach = sata_fsl_pmp_detach, }; +static void sata_fsl_host_stop(struct ata_host *host) +{ + struct sata_fsl_host_priv *host_priv = host->private_data; + + iounmap(host_priv->hcr_base); + kfree(host_priv); +} + +static struct ata_port_operations sata_fsl_platform_ops = { + .inherits = &sata_fsl_ops, + .host_stop = sata_fsl_host_stop, +}; + static const struct ata_port_info sata_fsl_port_info[] = { { .flags = SATA_FSL_HOST_FLAGS, .pio_mask = ATA_PIO4, .udma_mask = ATA_UDMA6, - .port_ops = &sata_fsl_ops, + .port_ops = &sata_fsl_platform_ops, }, }; @@ -1558,8 +1571,6 @@ static int sata_fsl_remove(struct platform_device *ofdev) ata_host_detach(host); irq_dispose_mapping(host_priv->irq); - iounmap(host_priv->hcr_base); - kfree(host_priv); return 0; }
When the `rmmod sata_fsl.ko` command is executed in the PPC64 GNU/Linux, a bug is reported: ================================================================== BUG: Unable to handle kernel data access on read at 0x80000800805b502c Oops: Kernel access of bad area, sig: 11 [#1] NIP [c0000000000388a4] .ioread32+0x4/0x20 LR [80000000000c6034] .sata_fsl_port_stop+0x44/0xe0 [sata_fsl] Call Trace: .free_irq+0x1c/0x4e0 (unreliable) .ata_host_stop+0x74/0xd0 [libata] .release_nodes+0x330/0x3f0 .device_release_driver_internal+0x178/0x2c0 .driver_detach+0x64/0xd0 .bus_remove_driver+0x70/0xf0 .driver_unregister+0x38/0x80 .platform_driver_unregister+0x14/0x30 .fsl_sata_driver_exit+0x18/0xa20 [sata_fsl] .__se_sys_delete_module+0x1ec/0x2d0 .system_call_exception+0xfc/0x1f0 system_call_common+0xf8/0x200 ================================================================== The triggering of the BUG is shown in the following stack: driver_detach device_release_driver_internal __device_release_driver drv->remove(dev) --> platform_drv_remove/platform_remove drv->remove(dev) --> sata_fsl_remove iounmap(host_priv->hcr_base); <---- unmap kfree(host_priv); <---- free devres_release_all release_nodes dr->node.release(dev, dr->data) --> ata_host_stop ap->ops->port_stop(ap) --> sata_fsl_port_stop ioread32(hcr_base + HCONTROL) <---- UAF host->ops->host_stop(host) The iounmap(host_priv->hcr_base) and kfree(host_priv) commands should not be executed in drv->remove. These commands should be executed in host_stop after port_stop. Therefore, we move these commands to the new function sata_fsl_host_stop and bind the new function to host_stop by referring to achi. Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Baokun Li <libaokun1@huawei.com> --- drivers/ata/sata_fsl.c | 17 ++++++++++++++--- 1 file changed, 14 insertions(+), 3 deletions(-)