@@ -196,7 +196,7 @@ static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *ade
}
/**
- * pdc2027x_pata_cable_detect - Probe host controller cable detect info
+ * pdc2027x_cable_detect - Probe host controller cable detect info
* @ap: Port for which cable detect info is desired
*
* Read 80c cable indicator from Promise extended register.
@@ -251,7 +251,7 @@ static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
}
/**
- * pdc2720x_mode_filter - mode selection filter
+ * pdc2027x_mode_filter - mode selection filter
* @adev: ATA device
* @mask: list of modes proposed
*
@@ -503,11 +503,11 @@ static long pdc_read_counter(struct ata_host *host)
}
/**
- * adjust_pll - Adjust the PLL input clock in Hz.
+ * pdc_adjust_pll - Adjust the PLL input clock in Hz.
*
- * @pdc_controller: controller specific information
* @host: target ATA host
* @pll_clock: The input of PLL in HZ
+ * @board_idx: board identifier
*/
static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx)
{
@@ -590,7 +590,7 @@ static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int b
}
/**
- * detect_pll_input_clock - Detect the PLL input clock in Hz.
+ * pdc_detect_pll_input_clock - Detect the PLL input clock in Hz.
* @host: target ATA host
* Ex. 16949000 on 33MHz PCI bus for pdc20275.
* Half of the PCI clock.
Fixes the following W=1 kernel build warning(s): drivers/ata/pata_pdc2027x.c:209: warning: expecting prototype for pdc2027x_pata_cable_detect(). Prototype was for pdc2027x_cable_detect() instead drivers/ata/pata_pdc2027x.c:262: warning: expecting prototype for pdc2720x_mode_filter(). Prototype was for pdc2027x_mode_filter() instead drivers/ata/pata_pdc2027x.c:513: warning: Function parameter or member 'board_idx' not described in 'pdc_adjust_pll' drivers/ata/pata_pdc2027x.c:513: warning: expecting prototype for adjust_pll(). Prototype was for pdc_adjust_pll() instead drivers/ata/pata_pdc2027x.c:599: warning: expecting prototype for detect_pll_input_clock(). Prototype was for pdc_detect_pll_input_clock() instead Cc: Jens Axboe <axboe@kernel.dk> Cc: Albert Lee <albertcc@tw.ibm.com> Cc: Andre Hedrick <andre@linux-ide.org> Cc: Frank Tiernan <frankt@promise.com> Cc: linux-ide@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> --- drivers/ata/pata_pdc2027x.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)