[v5,24/27] ata: move ata_sas_*() to libata-sata.c

Message ID	20200326155822.19400-25-b.zolnierkie@samsung.com
State	Not Applicable
Delegated to:	David Miller
Headers	show Return-Path: <linux-ide-owner@vger.kernel.org> From: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> To: Jens Axboe <axboe@kernel.dk> Cc: Michael Schmitz <schmitzmic@gmail.com>, Geert Uytterhoeven <geert@linux-m68k.org>, Christoph Hellwig <hch@lst.de>, linux-ide@vger.kernel.org, linux-m68k@lists.linux-m68k.org, linux-kernel@vger.kernel.org, b.zolnierkie@samsung.com Subject: [PATCH v5 24/27] ata: move ata_sas_*() to libata-sata.c Date: Thu, 26 Mar 2020 16:58:19 +0100 Message-Id: <20200326155822.19400-25-b.zolnierkie@samsung.com> In-Reply-To: <20200326155822.19400-1-b.zolnierkie@samsung.com> MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain; charset="utf-8" CMS-TYPE: 201P References: <20200326155822.19400-1-b.zolnierkie@samsung.com> <CGME20200326155848eucas1p2f3c45c3f3a26da7950118a88a1a65502@eucas1p2.samsung.com> Sender: linux-ide-owner@vger.kernel.org Precedence: bulk
Series	ata: optimize core code size on PATA only setups \| expand [v5,00/27] ata: optimize core code size on PATA only setups [v5,01/27] ata: remove stale maintainership information from core code [v5,02/27] ata: expose ncq_enable_prio sysfs attribute only on NCQ capable hosts [v5,03/27] ata: make SATA_PMP option selectable only if any SATA host driver is enabled [v5,04/27] sata_promise: use ata_cable_sata() [v5,05/27] ata: simplify ata_scsiop_inq_89() [v5,06/27] ata: use COMMAND_LINE_SIZE for ata_force_param_buf[] size [v5,07/27] ata: optimize struct ata_force_param size [v5,08/27] ata: optimize ata_scsi_rbuf[] size [v5,09/27] ata: move EXPORT_SYMBOL_GPL()s close to exported code [v5,10/27] ata: remove EXPORT_SYMBOL_GPL()s not used by modules [v5,11/27] ata: fix CodingStyle issues in PATA timings code [v5,12/27] ata: separate PATA timings code from libata-core.c [v5,13/27] ata: add CONFIG_SATA_HOST=n version of ata_ncq_enabled() [v5,14/27] ata: let compiler optimize out ata_dev_config_ncq() on non-SATA hosts [v5,15/27] ata: let compiler optimize out ata_eh_set_lpm() on non-SATA hosts [v5,16/27] ata: start separating SATA specific code from libata-core.c [v5,17/27] ata: move sata_scr_() to libata-sata.c [v5,18/27] ata: move sata_set_spd() to libata-sata.c [v5,19/27] ata: move sata_link_{debounce,resume}() to libata-sata.c [v5,20/27] ata: move sata_link_hardreset() to libata-sata.c [v5,21/27] ata: move ata_qc_complete_multiple() to libata-sata.c [v5,22/27] ata: move sata_deb_timing_() to libata-sata.c [v5,23/27] ata: start separating SATA specific code from libata-scsi.c [v5,24/27] ata: move ata_sas_*() to libata-sata.c [v5,25/27] ata: start separating SATA specific code from libata-eh.c [v5,26/27] ata: move ata_eh_analyze_ncq_error() & co. to libata-sata.c [v5,27/27] ata: make "libata.force" kernel parameter optional

diff --git a/drivers/ata/libata-sata.c b/drivers/ata/libata-sata.c index 341699f5af20..2d934ccfc930 100644 --- a/drivers/ata/libata-sata.c +++ b/drivers/ata/libata-sata.c @@ -8,10 +8,12 @@ #include <linux/kernel.h> #include <linux/module.h> +#include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> #include <linux/libata.h> #include "libata.h" +#include "libata-transport.h" /* debounce timing parameters in msecs { interval, duration, timeout } */ const unsigned long sata_deb_timing_normal[] = { 5, 100, 2000 }; @@ -1062,3 +1064,214 @@ int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth) return __ata_change_queue_depth(ap, sdev, queue_depth); } EXPORT_SYMBOL_GPL(ata_scsi_change_queue_depth); + +/** + * port_alloc - Allocate port for a SAS attached SATA device + * @host: ATA host container for all SAS ports + * @port_info: Information from low-level host driver + * @shost: SCSI host that the scsi device is attached to + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * ata_port pointer on success / NULL on failure. + */ + +struct ata_port *ata_sas_port_alloc(struct ata_host *host, + struct ata_port_info *port_info, + struct Scsi_Host *shost) +{ + struct ata_port *ap; + + ap = ata_port_alloc(host); + if (!ap) + return NULL; + + ap->port_no = 0; + ap->lock = &host->lock; + ap->pio_mask = port_info->pio_mask; + ap->mwdma_mask = port_info->mwdma_mask; + ap->udma_mask = port_info->udma_mask; + ap->flags |= port_info->flags; + ap->ops = port_info->port_ops; + ap->cbl = ATA_CBL_SATA; + + return ap; +} +EXPORT_SYMBOL_GPL(ata_sas_port_alloc); + +/** + * ata_sas_port_start - Set port up for dma. + * @ap: Port to initialize + * + * Called just after data structures for each port are + * initialized. + * + * May be used as the port_start() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ +int ata_sas_port_start(struct ata_port *ap) +{ + /* + * the port is marked as frozen at allocation time, but if we don't + * have new eh, we won't thaw it + */ + if (!ap->ops->error_handler) + ap->pflags &= ~ATA_PFLAG_FROZEN; + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_port_start); + +/** + * ata_port_stop - Undo ata_sas_port_start() + * @ap: Port to shut down + * + * May be used as the port_stop() entry in ata_port_operations. + * + * LOCKING: + * Inherited from caller. + */ + +void ata_sas_port_stop(struct ata_port *ap) +{ +} +EXPORT_SYMBOL_GPL(ata_sas_port_stop); + +/** + * ata_sas_async_probe - simply schedule probing and return + * @ap: Port to probe + * + * For batch scheduling of probe for sas attached ata devices, assumes + * the port has already been through ata_sas_port_init() + */ +void ata_sas_async_probe(struct ata_port *ap) +{ + __ata_port_probe(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_async_probe); + +int ata_sas_sync_probe(struct ata_port *ap) +{ + return ata_port_probe(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_sync_probe); + + +/** + * ata_sas_port_init - Initialize a SATA device + * @ap: SATA port to initialize + * + * LOCKING: + * PCI/etc. bus probe sem. + * + * RETURNS: + * Zero on success, non-zero on error. + */ + +int ata_sas_port_init(struct ata_port *ap) +{ + int rc = ap->ops->port_start(ap); + + if (rc) + return rc; + ap->print_id = atomic_inc_return(&ata_print_id); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_port_init); + +int ata_sas_tport_add(struct device *parent, struct ata_port *ap) +{ + return ata_tport_add(parent, ap); +} +EXPORT_SYMBOL_GPL(ata_sas_tport_add); + +void ata_sas_tport_delete(struct ata_port *ap) +{ + ata_tport_delete(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_tport_delete); + +/** + * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc + * @ap: SATA port to destroy + * + */ + +void ata_sas_port_destroy(struct ata_port *ap) +{ + if (ap->ops->port_stop) + ap->ops->port_stop(ap); + kfree(ap); +} +EXPORT_SYMBOL_GPL(ata_sas_port_destroy); + +/** + * ata_sas_slave_configure - Default slave_config routine for libata devices + * @sdev: SCSI device to configure + * @ap: ATA port to which SCSI device is attached + * + * RETURNS: + * Zero. + */ + +int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) +{ + ata_scsi_sdev_config(sdev); + ata_scsi_dev_config(sdev, ap->link.device); + return 0; +} +EXPORT_SYMBOL_GPL(ata_sas_slave_configure); + +/** + * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device + * @cmd: SCSI command to be sent + * @ap: ATA port to which the command is being sent + * + * RETURNS: + * Return value from __ata_scsi_queuecmd() if @cmd can be queued, + * 0 otherwise. + */ + +int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) +{ + int rc = 0; + + ata_scsi_dump_cdb(ap, cmd); + + if (likely(ata_dev_enabled(ap->link.device))) + rc = __ata_scsi_queuecmd(cmd, ap->link.device); + else { + cmd->result = (DID_BAD_TARGET << 16); + cmd->scsi_done(cmd); + } + return rc; +} +EXPORT_SYMBOL_GPL(ata_sas_queuecmd); + +int ata_sas_allocate_tag(struct ata_port *ap) +{ + unsigned int max_queue = ap->host->n_tags; + unsigned int i, tag; + + for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) { + tag = tag < max_queue ? tag : 0; + + /* the last tag is reserved for internal command. */ + if (ata_tag_internal(tag)) + continue; + + if (!test_and_set_bit(tag, &ap->sas_tag_allocated)) { + ap->sas_last_tag = tag; + return tag; + } + } + return -1; +} + +void ata_sas_free_tag(unsigned int tag, struct ata_port *ap) +{ + clear_bit(tag, &ap->sas_tag_allocated); +} diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a5dfcd9e09a1..36e588d88b95 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -988,7 +988,7 @@ static void ata_gen_ata_sense(struct ata_queued_cmd *qc) scsi_set_sense_information(sb, SCSI_SENSE_BUFFERSIZE, block); } -static void ata_scsi_sdev_config(struct scsi_device *sdev) +void ata_scsi_sdev_config(struct scsi_device *sdev) { sdev->use_10_for_rw = 1; sdev->use_10_for_ms = 1; @@ -1028,8 +1028,7 @@ static int atapi_drain_needed(struct request *rq) return atapi_cmd_type(scsi_req(rq)->cmd[0]) == ATAPI_MISC; } -static int ata_scsi_dev_config(struct scsi_device *sdev, - struct ata_device *dev) +int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev) { struct request_queue *q = sdev->request_queue; @@ -4005,8 +4004,7 @@ static inline ata_xlat_func_t ata_get_xlat_func(struct ata_device *dev, u8 cmd) * Prints the contents of a SCSI command via printk(). */ -static inline void ata_scsi_dump_cdb(struct ata_port *ap, - struct scsi_cmnd *cmd) +void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd) { #ifdef ATA_VERBOSE_DEBUG struct scsi_device *scsidev = cmd->device; @@ -4018,8 +4016,7 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap, #endif } -static inline int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, - struct ata_device *dev) +int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev) { u8 scsi_op = scmd->cmnd[0]; ata_xlat_func_t xlat_func; @@ -4662,214 +4659,3 @@ void ata_scsi_dev_rescan(struct work_struct *work) spin_unlock_irqrestore(ap->lock, flags); mutex_unlock(&ap->scsi_scan_mutex); } - -/** - * ata_sas_port_alloc - Allocate port for a SAS attached SATA device - * @host: ATA host container for all SAS ports - * @port_info: Information from low-level host driver - * @shost: SCSI host that the scsi device is attached to - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * ata_port pointer on success / NULL on failure. - */ - -struct ata_port *ata_sas_port_alloc(struct ata_host *host, - struct ata_port_info *port_info, - struct Scsi_Host *shost) -{ - struct ata_port *ap; - - ap = ata_port_alloc(host); - if (!ap) - return NULL; - - ap->port_no = 0; - ap->lock = &host->lock; - ap->pio_mask = port_info->pio_mask; - ap->mwdma_mask = port_info->mwdma_mask; - ap->udma_mask = port_info->udma_mask; - ap->flags |= port_info->flags; - ap->ops = port_info->port_ops; - ap->cbl = ATA_CBL_SATA; - - return ap; -} -EXPORT_SYMBOL_GPL(ata_sas_port_alloc); - -/** - * ata_sas_port_start - Set port up for dma. - * @ap: Port to initialize - * - * Called just after data structures for each port are - * initialized. - * - * May be used as the port_start() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ -int ata_sas_port_start(struct ata_port *ap) -{ - /* - * the port is marked as frozen at allocation time, but if we don't - * have new eh, we won't thaw it - */ - if (!ap->ops->error_handler) - ap->pflags &= ~ATA_PFLAG_FROZEN; - return 0; -} -EXPORT_SYMBOL_GPL(ata_sas_port_start); - -/** - * ata_port_stop - Undo ata_sas_port_start() - * @ap: Port to shut down - * - * May be used as the port_stop() entry in ata_port_operations. - * - * LOCKING: - * Inherited from caller. - */ - -void ata_sas_port_stop(struct ata_port *ap) -{ -} -EXPORT_SYMBOL_GPL(ata_sas_port_stop); - -/** - * ata_sas_async_probe - simply schedule probing and return - * @ap: Port to probe - * - * For batch scheduling of probe for sas attached ata devices, assumes - * the port has already been through ata_sas_port_init() - */ -void ata_sas_async_probe(struct ata_port *ap) -{ - __ata_port_probe(ap); -} -EXPORT_SYMBOL_GPL(ata_sas_async_probe); - -int ata_sas_sync_probe(struct ata_port *ap) -{ - return ata_port_probe(ap); -} -EXPORT_SYMBOL_GPL(ata_sas_sync_probe); - - -/** - * ata_sas_port_init - Initialize a SATA device - * @ap: SATA port to initialize - * - * LOCKING: - * PCI/etc. bus probe sem. - * - * RETURNS: - * Zero on success, non-zero on error. - */ - -int ata_sas_port_init(struct ata_port *ap) -{ - int rc = ap->ops->port_start(ap); - - if (rc) - return rc; - ap->print_id = atomic_inc_return(&ata_print_id); - return 0; -} -EXPORT_SYMBOL_GPL(ata_sas_port_init); - -int ata_sas_tport_add(struct device *parent, struct ata_port *ap) -{ - return ata_tport_add(parent, ap); -} -EXPORT_SYMBOL_GPL(ata_sas_tport_add); - -void ata_sas_tport_delete(struct ata_port *ap) -{ - ata_tport_delete(ap); -} -EXPORT_SYMBOL_GPL(ata_sas_tport_delete); - -/** - * ata_sas_port_destroy - Destroy a SATA port allocated by ata_sas_port_alloc - * @ap: SATA port to destroy - * - */ - -void ata_sas_port_destroy(struct ata_port *ap) -{ - if (ap->ops->port_stop) - ap->ops->port_stop(ap); - kfree(ap); -} -EXPORT_SYMBOL_GPL(ata_sas_port_destroy); - -/** - * ata_sas_slave_configure - Default slave_config routine for libata devices - * @sdev: SCSI device to configure - * @ap: ATA port to which SCSI device is attached - * - * RETURNS: - * Zero. - */ - -int ata_sas_slave_configure(struct scsi_device *sdev, struct ata_port *ap) -{ - ata_scsi_sdev_config(sdev); - ata_scsi_dev_config(sdev, ap->link.device); - return 0; -} -EXPORT_SYMBOL_GPL(ata_sas_slave_configure); - -/** - * ata_sas_queuecmd - Issue SCSI cdb to libata-managed device - * @cmd: SCSI command to be sent - * @ap: ATA port to which the command is being sent - * - * RETURNS: - * Return value from __ata_scsi_queuecmd() if @cmd can be queued, - * 0 otherwise. - */ - -int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap) -{ - int rc = 0; - - ata_scsi_dump_cdb(ap, cmd); - - if (likely(ata_dev_enabled(ap->link.device))) - rc = __ata_scsi_queuecmd(cmd, ap->link.device); - else { - cmd->result = (DID_BAD_TARGET << 16); - cmd->scsi_done(cmd); - } - return rc; -} -EXPORT_SYMBOL_GPL(ata_sas_queuecmd); - -int ata_sas_allocate_tag(struct ata_port *ap) -{ - unsigned int max_queue = ap->host->n_tags; - unsigned int i, tag; - - for (i = 0, tag = ap->sas_last_tag + 1; i < max_queue; i++, tag++) { - tag = tag < max_queue ? tag : 0; - - /* the last tag is reserved for internal command. */ - if (ata_tag_internal(tag)) - continue; - - if (!test_and_set_bit(tag, &ap->sas_tag_allocated)) { - ap->sas_last_tag = tag; - return tag; - } - } - return -1; -} - -void ata_sas_free_tag(unsigned int tag, struct ata_port *ap) -{ - clear_bit(tag, &ap->sas_tag_allocated); -} diff --git a/drivers/ata/libata.h b/drivers/ata/libata.h index ce3f3c039572..6c808cf39135 100644 --- a/drivers/ata/libata.h +++ b/drivers/ata/libata.h @@ -87,6 +87,18 @@ extern unsigned int ata_read_log_page(struct ata_device *dev, u8 log, #define to_ata_port(d) container_of(d, struct ata_port, tdev) +/* libata-sata.c */ +#ifdef CONFIG_SATA_HOST +int ata_sas_allocate_tag(struct ata_port *ap); +void ata_sas_free_tag(unsigned int tag, struct ata_port *ap); +#else +static inline int ata_sas_allocate_tag(struct ata_port *ap) +{ + return -EOPNOTSUPP; +} +static inline void ata_sas_free_tag(unsigned int tag, struct ata_port *ap) { } +#endif + /* libata-acpi.c */ #ifdef CONFIG_ATA_ACPI extern unsigned int ata_acpi_gtf_filter; @@ -130,9 +142,10 @@ extern void ata_scsi_dev_rescan(struct work_struct *work); extern int ata_bus_probe(struct ata_port *ap); extern int ata_scsi_user_scan(struct Scsi_Host *shost, unsigned int channel, unsigned int id, u64 lun); -int ata_sas_allocate_tag(struct ata_port *ap); -void ata_sas_free_tag(unsigned int tag, struct ata_port *ap); - +void ata_scsi_sdev_config(struct scsi_device *sdev); +int ata_scsi_dev_config(struct scsi_device *sdev, struct ata_device *dev); +void ata_scsi_dump_cdb(struct ata_port *ap, struct scsi_cmnd *cmd); +int __ata_scsi_queuecmd(struct scsi_cmnd *scmd, struct ata_device *dev); /* libata-eh.c */ extern unsigned long ata_internal_cmd_timeout(struct ata_device *dev, u8 cmd); diff --git a/include/linux/libata.h b/include/linux/libata.h index ae74fd048a32..da899f18a3e9 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1094,18 +1094,6 @@ extern int ata_scsi_ioctl(struct scsi_device *dev, unsigned int cmd, extern int ata_scsi_queuecmd(struct Scsi_Host *h, struct scsi_cmnd *cmd); extern int ata_sas_scsi_ioctl(struct ata_port *ap, struct scsi_device *dev, unsigned int cmd, void __user *arg); -extern void ata_sas_port_destroy(struct ata_port *); -extern struct ata_port *ata_sas_port_alloc(struct ata_host *, - struct ata_port_info *, struct Scsi_Host *); -extern void ata_sas_async_probe(struct ata_port *ap); -extern int ata_sas_sync_probe(struct ata_port *ap); -extern int ata_sas_port_init(struct ata_port *); -extern int ata_sas_port_start(struct ata_port *ap); -extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap); -extern void ata_sas_tport_delete(struct ata_port *ap); -extern void ata_sas_port_stop(struct ata_port *ap); -extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *); -extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap); extern bool ata_link_online(struct ata_link *link); extern bool ata_link_offline(struct ata_link *link); #ifdef CONFIG_PM @@ -1235,6 +1223,18 @@ extern int sata_link_debounce(struct ata_link *link, extern int sata_link_scr_lpm(struct ata_link *link, enum ata_lpm_policy policy, bool spm_wakeup); extern int ata_slave_link_init(struct ata_port *ap); +extern void ata_sas_port_destroy(struct ata_port *); +extern struct ata_port *ata_sas_port_alloc(struct ata_host *, + struct ata_port_info *, struct Scsi_Host *); +extern void ata_sas_async_probe(struct ata_port *ap); +extern int ata_sas_sync_probe(struct ata_port *ap); +extern int ata_sas_port_init(struct ata_port *); +extern int ata_sas_port_start(struct ata_port *ap); +extern int ata_sas_tport_add(struct device *parent, struct ata_port *ap); +extern void ata_sas_tport_delete(struct ata_port *ap); +extern void ata_sas_port_stop(struct ata_port *ap); +extern int ata_sas_slave_configure(struct scsi_device *, struct ata_port *); +extern int ata_sas_queuecmd(struct scsi_cmnd *cmd, struct ata_port *ap); extern void ata_tf_to_fis(const struct ata_taskfile *tf, u8 pmp, int is_cmd, u8 *fis); extern void ata_tf_from_fis(const u8 *fis, struct ata_taskfile *tf);

[v5,24/27] ata: move ata_sas_*() to libata-sata.c

Commit Message

Patch