| Message ID | 20191213080334.26922-1-s.hauer@pengutronix.de |
|---|---|
| State | Not Applicable |
| Delegated to: | David Miller |
| Headers | show |
| Series | libata: Fix retrieving of active qcs | expand |
On Fri, Dec 13, 2019 at 09:03:34AM +0100, Sascha Hauer wrote: > ata_qc_complete_multiple() is called with a mask of the still active > tags. > > mv_sata doesn't have this information directly and instead calculates > the still active tags from the started tags (ap->qc_active) and the > finished tags as (ap->qc_active ^ done_mask) > > Since 28361c40368 the hw_tag and tag are no longer the same and the > equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is > initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is > started and this will be in done_mask on completion. ap->qc_active ^ > done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as > the internal tag will never be reported as completed. > > This is fixed by introducing ata_qc_get_active() which returns the > active hardware tags and calling it where appropriate. > > This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same > problem. There is another case in sata_nv that most likely needs fixing > as well, but this looks a little different, so I wasn't confident enough > to change that. > > Fixes: 28361c403683 ("libata: add extra internal command") > Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> > --- Ignore this, it lacks the v2 tag :-/ Sascha
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index e9017c570bc5..a330e1f28ff4 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -5328,6 +5328,29 @@ void ata_qc_complete(struct ata_queued_cmd *qc) } } +/** + * ata_qc_get_active - get bitmask of active qcs + * @ap: port in question + * + * LOCKING: + * spin_lock_irqsave(host lock) + * + * RETURNS: + * Bitmask of active qcs + */ +u64 ata_qc_get_active(struct ata_port *ap) +{ + u64 qc_active = ap->qc_active; + + /* ATA_TAG_INTERNAL is sent to hw as tag 0 */ + if (qc_active & (1ULL << ATA_TAG_INTERNAL)) { + qc_active |= (1 << 0); + qc_active &= ~(1ULL << ATA_TAG_INTERNAL); + } + + return qc_active; +} + /** * ata_qc_complete_multiple - Complete multiple qcs successfully * @ap: port in question diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c index 9239615d8a04..d55ee244d693 100644 --- a/drivers/ata/sata_fsl.c +++ b/drivers/ata/sata_fsl.c @@ -1280,7 +1280,7 @@ static void sata_fsl_host_intr(struct ata_port *ap) i, ioread32(hcr_base + CC), ioread32(hcr_base + CA)); } - ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask); return; } else if ((ap->qc_active & (1ULL << ATA_TAG_INTERNAL))) { diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 277f11909fc1..d7228f8e9297 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -2829,7 +2829,7 @@ static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp } if (work_done) { - ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask); /* Update the software queue position index in hardware */ writelfl((pp->crpb_dma & EDMA_RSP_Q_BASE_LO_MASK) | diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index f3e62f5528bd..eb9dc14e5147 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -984,7 +984,7 @@ static irqreturn_t nv_adma_interrupt(int irq, void *dev_instance) check_commands = 0; check_commands &= ~(1 << pos); } - ata_qc_complete_multiple(ap, ap->qc_active ^ done_mask); + ata_qc_complete_multiple(ap, ata_qc_get_active(ap) ^ done_mask); } } diff --git a/include/linux/libata.h b/include/linux/libata.h index d3bbfddf616a..2dbde119721d 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -1175,6 +1175,7 @@ extern unsigned int ata_do_dev_read_id(struct ata_device *dev, struct ata_taskfile *tf, u16 *id); extern void ata_qc_complete(struct ata_queued_cmd *qc); extern int ata_qc_complete_multiple(struct ata_port *ap, u64 qc_active); +extern u64 ata_qc_get_active(struct ata_port *ap); extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd); extern int ata_std_bios_param(struct scsi_device *sdev, struct block_device *bdev,
ata_qc_complete_multiple() is called with a mask of the still active tags. mv_sata doesn't have this information directly and instead calculates the still active tags from the started tags (ap->qc_active) and the finished tags as (ap->qc_active ^ done_mask) Since 28361c40368 the hw_tag and tag are no longer the same and the equation is no longer valid. In ata_exec_internal_sg() ap->qc_active is initialized as 1ULL << ATA_TAG_INTERNAL, but in hardware tag 0 is started and this will be in done_mask on completion. ap->qc_active ^ done_mask becomes 0x100000000 ^ 0x1 = 0x100000001 and thus tag 0 used as the internal tag will never be reported as completed. This is fixed by introducing ata_qc_get_active() which returns the active hardware tags and calling it where appropriate. This is tested on mv_sata, but sata_fsl and sata_nv suffer from the same problem. There is another case in sata_nv that most likely needs fixing as well, but this looks a little different, so I wasn't confident enough to change that. Fixes: 28361c403683 ("libata: add extra internal command") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- drivers/ata/libata-core.c | 23 +++++++++++++++++++++++ drivers/ata/sata_fsl.c | 2 +- drivers/ata/sata_mv.c | 2 +- drivers/ata/sata_nv.c | 2 +- include/linux/libata.h | 1 + 5 files changed, 27 insertions(+), 3 deletions(-)