diff --git a/MAINTAINERS b/MAINTAINERS
index f7d568b8f133..96753be12026 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7531,6 +7531,15 @@ S:	Maintained
 F:	drivers/ata/pata_*.c
 F:	drivers/ata/ata_generic.c
 
+LIBATA PATA FARADAY FTIDE010 AND GEMINI SATA BRIDGE DRIVERS
+M:	Linus Walleij <linus.walleij@linaro.org>
+L:	linux-ide@vger.kernel.org
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git
+S:	Maintained
+F:	drivers/ata/pata_ftide010.c
+F:	drivers/ata/sata_gemini.c
+F:	drivers/ata/sata_gemini.h
+
 LIBATA SATA AHCI PLATFORM devices support
 M:	Hans de Goede <hdegoede@redhat.com>
 M:	Tejun Heo <tj@kernel.org>
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index de3eaf051697..948fc86980a1 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -213,6 +213,16 @@ config SATA_FSL
 
 	  If unsure, say N.
 
+config SATA_GEMINI
+	tristate "Gemini SATA bridge support"
+	depends on PATA_FTIDE010
+	default ARCH_GEMINI
+	help
+	  This enabled support for the FTIDE010 to SATA bridge
+	  found in Cortina Systems Gemini platform.
+
+	  If unsure, say N.
+
 config SATA_AHCI_SEATTLE
 	tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 	depends on ARCH_SEATTLE
@@ -599,6 +609,17 @@ config PATA_EP93XX
 
 	  If unsure, say N.
 
+config PATA_FTIDE010
+	tristate "Faraday Technology FTIDE010 PATA support"
+	depends on OF
+	depends on ARM
+	default ARCH_GEMINI
+	help
+	  This option enables support for the Faraday FTIDE010
+	  PATA controller found in the Cortina Gemini SoCs.
+
+	  If unsure, say N.
+
 config PATA_HPT366
 	tristate "HPT 366/368 PATA support"
 	depends on PCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index cd931a5eba92..a26ef5a93919 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -7,6 +7,7 @@ obj-$(CONFIG_SATA_ACARD_AHCI)	+= acard-ahci.o libahci.o
 obj-$(CONFIG_SATA_AHCI_SEATTLE)	+= ahci_seattle.o libahci.o libahci_platform.o
 obj-$(CONFIG_SATA_AHCI_PLATFORM) += ahci_platform.o libahci.o libahci_platform.o
 obj-$(CONFIG_SATA_FSL)		+= sata_fsl.o
+obj-$(CONFIG_SATA_GEMINI)	+= sata_gemini.o
 obj-$(CONFIG_SATA_INIC162X)	+= sata_inic162x.o
 obj-$(CONFIG_SATA_SIL24)	+= sata_sil24.o
 obj-$(CONFIG_SATA_DWC)		+= sata_dwc_460ex.o
@@ -60,6 +61,7 @@ obj-$(CONFIG_PATA_CS5536)	+= pata_cs5536.o
 obj-$(CONFIG_PATA_CYPRESS)	+= pata_cypress.o
 obj-$(CONFIG_PATA_EFAR)		+= pata_efar.o
 obj-$(CONFIG_PATA_EP93XX)	+= pata_ep93xx.o
+obj-$(CONFIG_PATA_FTIDE010)	+= pata_ftide010.o
 obj-$(CONFIG_PATA_HPT366)	+= pata_hpt366.o
 obj-$(CONFIG_PATA_HPT37X)	+= pata_hpt37x.o
 obj-$(CONFIG_PATA_HPT3X2N)	+= pata_hpt3x2n.o
diff --git a/drivers/ata/pata_ftide010.c b/drivers/ata/pata_ftide010.c
new file mode 100644
index 000000000000..d3acf72039e2
--- /dev/null
+++ b/drivers/ata/pata_ftide010.c
@@ -0,0 +1,552 @@
+/*
+ * Faraday Technology FTIDE010 driver
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ *
+ * Includes portions of the SL2312/SL3516/Gemini PATA driver
+ * Copyright (C) 2003 StorLine, Inc <jason@storlink.com.tw>
+ * Copyright (C) 2009 Janos Laube <janos.dev@gmail.com>
+ * Copyright (C) 2010 Frederic Pecourt <opengemini@free.fr>
+ * Copyright (C) 2011 Tobias Waldvogel <tobias.waldvogel@gmail.com>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/libata.h>
+#include <linux/bitops.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include "sata_gemini.h"
+
+/**
+ * struct ftide010 - state container for the Faraday FTIDE010
+ * @dev: pointer back to the device representing this controller
+ * @base: remapped I/O space address
+ * @pclk: peripheral clock for the IDE block
+ * @host: pointer to the ATA host for this device
+ * @pio_timings: combined active/recovery values to be written to
+ * the PIO timing register for modes 0, 1, 2, 3 and 4.
+ * @mwdma_50_timings: combined active/recovery values to be written
+ * to the multiword DMA mode timing register for modes 0, 1 and 2
+ * at 50MHz speed
+ * @mwdma_66_timings: same as @mwdma_50_timings but for 66MHz
+ * @udma_50_timings: combined setup/hold values to be written
+ * to the ultra DMA mode timing register for modes 0-5 at 50MHz
+ * speed
+ * @udma_66_timings: combined setup/hold values to be written
+ * to the ultra DMA mode timing register for modes 0-6 at 66MHz
+ * speed
+ * @master_cbl: master cable type
+ * @slave_cbl: slave cable type
+ * @sg: Gemini SATA bridge pointer, if running on the Gemini
+ */
+struct ftide010 {
+	struct device *dev;
+	void __iomem *base;
+	struct clk *pclk;
+	struct ata_host *host;
+	u8 pio_timings[5];
+	u8 mwdma_50_timings[3];
+	u8 mwdma_66_timings[3];
+	u8 udma_50_timings[6];
+	u8 udma_66_timings[7];
+	unsigned int master_cbl;
+	unsigned int slave_cbl;
+	/* Gemini-specific properties */
+	struct sata_gemini *sg;
+	bool master_to_sata0;
+	bool slave_to_sata0;
+	bool master_to_sata1;
+	bool slave_to_sata1;
+};
+
+#define DMA_REG			0x00
+#define DMA_STATUS		0x02
+#define IDE_BMDTPR		0x04
+#define IDE_DEVICE_ID		0x08
+#define PIO_TIMING_REG		0x10
+#define MWDMA_TIMING_REG	0x11
+#define UDMA_TIMING0_REG	0x12 /* Master */
+#define UDMA_TIMING1_REG	0x13 /* Slave */
+#define CLK_MOD_REG		0x14
+/* These registers are mapped directly to the IDE registers */
+#define CMD_DATA_REG		0x20
+#define ERROR_FEATURES_REG	0x21
+#define NSECT_REG		0x22
+#define LBAL_REG		0x23
+#define LBAM_REG		0x24
+#define LBAH_REG		0x25
+#define DEVICE_REG		0x26
+#define STATUS_COMMAND_REG	0x27
+#define ALTSTAT_CTRL_REG	0x36
+
+/* Set this bit for UDMA mode 5 and 6 */
+#define UDMA_TIMING_MODE_56	BIT(7)
+
+/* 0 = 50 MHz, 1 = 66 MHz */
+#define CLK_MOD_DEV0_CLK_SEL	BIT(0)
+#define CLK_MOD_DEV1_CLK_SEL	BIT(1)
+/* Enable UDMA on a device */
+#define CLK_MOD_DEV0_UDMA_EN	BIT(4)
+#define CLK_MOD_DEV1_UDMA_EN	BIT(5)
+
+static struct scsi_host_template pata_ftide010_sht = {
+	ATA_BMDMA_SHT("pata-ftide010"),
+};
+
+/*
+ * We set 66 MHz for all MWDMA modes
+ */
+static const bool set_mdma_66_mhz[] = { true, true, true, true };
+
+/*
+ * We set 66 MHz for UDMA modes 3, 4 and 6 and no others
+ */
+static const bool set_udma_66_mhz[] = { false, false, false, true, true, false, true };
+
+static void ftide010_set_dmamode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct ftide010 *ftide = ap->host->private_data;
+	unsigned short speed = adev->dma_mode;
+	u8 devno = adev->devno & 1;
+	u8 udma_en_mask;
+	u8 f66m_en_mask;
+	u8 clkreg;
+	u8 timreg;
+	unsigned int i;
+
+	/* Target device 0 (master) or 1 (slave) */
+	if (!devno) {
+		udma_en_mask = CLK_MOD_DEV0_UDMA_EN;
+		f66m_en_mask = CLK_MOD_DEV0_CLK_SEL;
+	} else {
+		udma_en_mask = CLK_MOD_DEV1_UDMA_EN;
+		f66m_en_mask = CLK_MOD_DEV1_CLK_SEL;
+	}
+
+	clkreg = ioread8(ftide->base + CLK_MOD_REG);
+	clkreg &= ~udma_en_mask;
+	clkreg &= ~f66m_en_mask;
+
+	if (speed & XFER_UDMA_0) {
+		i = speed & ~XFER_UDMA_0;
+		dev_dbg(ftide->dev, "set UDMA mode %02x, index %d\n",
+			speed, i);
+
+		clkreg |= udma_en_mask;
+		if (set_udma_66_mhz[i]) {
+			clkreg |= f66m_en_mask;
+			timreg = ftide->udma_66_timings[i];
+		} else {
+			timreg = ftide->udma_50_timings[i];
+		}
+
+		/* A special bit needs to be set for modes 5 and 6 */
+		if (i >= 5)
+			timreg |= UDMA_TIMING_MODE_56;
+
+		dev_dbg(ftide->dev, "UDMA write clkreg = %02x, timreg = %02x\n",
+			clkreg, timreg);
+
+		writeb(clkreg, ftide->base + CLK_MOD_REG);
+		writeb(timreg, ftide->base + UDMA_TIMING0_REG + devno);
+	} else {
+		i = speed & ~XFER_MW_DMA_0;
+		dev_dbg(ftide->dev, "set MWDMA mode %02x, index %d\n",
+			speed, i);
+
+		if (set_mdma_66_mhz[i]) {
+			clkreg |= f66m_en_mask;
+			timreg = ftide->mwdma_66_timings[i];
+		} else {
+			timreg = ftide->mwdma_50_timings[i];
+		}
+		dev_dbg(ftide->dev,
+			"MWDMA write clkreg = %02x, timreg = %02x\n",
+			clkreg, timreg);
+		/* This will affect all devices */
+		writeb(clkreg, ftide->base + CLK_MOD_REG);
+		writeb(timreg, ftide->base + MWDMA_TIMING_REG);
+	}
+
+	return;
+}
+
+static void ftide010_set_piomode(struct ata_port *ap, struct ata_device *adev)
+{
+	struct ftide010 *ftide = ap->host->private_data;
+	unsigned int pio = adev->pio_mode - XFER_PIO_0;
+
+	dev_dbg(ftide->dev, "set PIO mode %02x, index %d\n",
+		adev->pio_mode, pio);
+	writeb(ftide->pio_timings[pio], ftide->base + PIO_TIMING_REG);
+}
+
+static struct ata_port_operations pata_ftide010_port_ops = {
+	.inherits	= &ata_bmdma_port_ops,
+	.set_dmamode	= ftide010_set_dmamode,
+	.set_piomode	= ftide010_set_piomode,
+};
+
+static struct ata_port_info ftide010_port_info[] = {
+	{
+		.flags		= ATA_FLAG_SLAVE_POSS,
+		.mwdma_mask	= ATA_MWDMA2,
+		.udma_mask	= ATA_UDMA6,
+		.pio_mask	= ATA_PIO4,
+		.port_ops	= &pata_ftide010_port_ops,
+	},
+};
+
+#if IS_ENABLED(CONFIG_SATA_GEMINI)
+
+static int pata_ftide010_gemini_port_start(struct ata_port *ap)
+{
+	struct ftide010 *ftide = ap->host->private_data;
+	struct device *dev = ftide->dev;
+	struct sata_gemini *sg = ftide->sg;
+	int bridges = 0;
+	int ret;
+
+	ret = ata_bmdma_port_start(ap);
+	if (ret)
+		return ret;
+
+	if (ftide->master_to_sata0) {
+		dev_info(dev, "SATA0 (master) start\n");
+		ret = gemini_sata_start_bridge(sg, 0);
+		if (!ret)
+			bridges++;
+	}
+	if (ftide->master_to_sata1) {
+		dev_info(dev, "SATA1 (master) start\n");
+		ret = gemini_sata_start_bridge(sg, 1);
+		if (!ret)
+			bridges++;
+	}
+	/* Avoid double-starting */
+	if (ftide->slave_to_sata0 && !ftide->master_to_sata0) {
+		dev_info(dev, "SATA0 (slave) start\n");
+		ret = gemini_sata_start_bridge(sg, 0);
+		if (!ret)
+			bridges++;
+	}
+	/* Avoid double-starting */
+	if (ftide->slave_to_sata1 && !ftide->master_to_sata1) {
+		dev_info(dev, "SATA1 (slave) start\n");
+		ret = gemini_sata_start_bridge(sg, 1);
+		if (!ret)
+			bridges++;
+	}
+
+	dev_info(dev, "brought %d bridges online\n", bridges);
+	return (bridges > 0) ? 0 : -EINVAL; // -ENODEV;
+}
+
+static void pata_ftide010_gemini_port_stop(struct ata_port *ap)
+{
+	struct ftide010 *ftide = ap->host->private_data;
+	struct device *dev = ftide->dev;
+	struct sata_gemini *sg = ftide->sg;
+
+	if (ftide->master_to_sata0) {
+		dev_info(dev, "SATA0 (master) stop\n");
+		gemini_sata_stop_bridge(sg, 0);
+	}
+	if (ftide->master_to_sata1) {
+		dev_info(dev, "SATA1 (master) stop\n");
+		gemini_sata_stop_bridge(sg, 1);
+	}
+	/* Avoid double-stopping */
+	if (ftide->slave_to_sata0 && !ftide->master_to_sata0) {
+		dev_info(dev, "SATA0 (slave) stop\n");
+		gemini_sata_stop_bridge(sg, 0);
+	}
+	/* Avoid double-stopping */
+	if (ftide->slave_to_sata1 && !ftide->master_to_sata1) {
+		dev_info(dev, "SATA1 (slave) stop\n");
+		gemini_sata_stop_bridge(sg, 1);
+	}
+}
+
+static int pata_ftide010_gemini_cable_detect(struct ata_port *ap)
+{
+	struct ftide010 *ftide = ap->host->private_data;
+
+	/*
+	 * Return the master cable, I have no clue how to return a different
+	 * cable for the slave than for the master.
+	 */
+	return ftide->master_cbl;
+}
+
+static int pata_ftide010_gemini_init(struct ftide010 *ftide,
+				     bool is_ata1)
+{
+	struct device *dev = ftide->dev;
+	struct sata_gemini *sg;
+	enum gemini_muxmode muxmode;
+
+	/* Look up SATA bridge */
+	sg = gemini_sata_bridge_get();
+	if (IS_ERR(sg))
+		return PTR_ERR(sg);
+	ftide->sg = sg;
+
+	muxmode = gemini_sata_get_muxmode(sg);
+
+	/* Special ops */
+	pata_ftide010_port_ops.port_start =
+		pata_ftide010_gemini_port_start;
+	pata_ftide010_port_ops.port_stop =
+		pata_ftide010_gemini_port_stop;
+	pata_ftide010_port_ops.cable_detect =
+		pata_ftide010_gemini_cable_detect;
+
+	/* Flag port as SATA-capable */
+	if (gemini_sata_bridge_enabled(sg, is_ata1))
+		ftide010_port_info[0].flags |= ATA_FLAG_SATA;
+
+	if (!is_ata1) {
+		switch (muxmode) {
+		case GEMINI_MUXMODE_0:
+			ftide->master_cbl = ATA_CBL_SATA;
+			ftide->slave_cbl = ATA_CBL_PATA40;
+			ftide->master_to_sata0 = true;
+			break;
+		case GEMINI_MUXMODE_1:
+			ftide->master_cbl = ATA_CBL_SATA;
+			ftide->slave_cbl = ATA_CBL_NONE;
+			ftide->master_to_sata0 = true;
+			break;
+		case GEMINI_MUXMODE_2:
+			ftide->master_cbl = ATA_CBL_PATA40;
+			ftide->slave_cbl = ATA_CBL_PATA40;
+			break;
+		case GEMINI_MUXMODE_3:
+			ftide->master_cbl = ATA_CBL_SATA;
+			ftide->slave_cbl = ATA_CBL_SATA;
+			ftide->master_to_sata0 = true;
+			ftide->slave_to_sata1 = true;
+			break;
+		}
+	} else {
+		switch (muxmode) {
+		case GEMINI_MUXMODE_0:
+			ftide->master_cbl = ATA_CBL_SATA;
+			ftide->slave_cbl = ATA_CBL_NONE;
+			ftide->master_to_sata1 = true;
+			break;
+		case GEMINI_MUXMODE_1:
+			ftide->master_cbl = ATA_CBL_SATA;
+			ftide->slave_cbl = ATA_CBL_PATA40;
+			ftide->master_to_sata1 = true;
+			break;
+		case GEMINI_MUXMODE_2:
+			ftide->master_cbl = ATA_CBL_SATA;
+			ftide->slave_cbl = ATA_CBL_SATA;
+			ftide->slave_to_sata0 = true;
+			ftide->master_to_sata1 = true;
+			break;
+		case GEMINI_MUXMODE_3:
+			ftide->master_cbl = ATA_CBL_PATA40;
+			ftide->slave_cbl = ATA_CBL_PATA40;
+			break;
+		}
+	}
+	dev_info(dev, "set up Gemini PATA%d\n", is_ata1);
+
+	return 0;
+}
+#else
+static int pata_ftide010_gemini_init(struct ftide010 *ftide,
+				     bool is_ata1)
+{
+	return -ENOTSUPP;
+}
+#endif
+
+/*
+ * Bus timings
+ *
+ * The unit of the below required timings is two clock periods of the ATA
+ * reference clock which is 30 nanoseconds per unit at 66MHz and 20
+ * nanoseconds per unit at 50 MHz. The PIO timings assume 33MHz speed for
+ * PIO.
+ *
+ * pio_active_time: array of 5 elements for T2 timing for Mode 0,
+ * 1, 2, 3 and 4. Range 0..15.
+ * pio_recovery_time: array of 5 elements for T2l timing for Mode 0,
+ * 1, 2, 3 and 4. Range 0..15.
+ * mdma_50_active_time: array of 4 elements for Td timing for multi
+ * word DMA, Mode 0, 1, and 2 at 50 MHz. Range 0..15.
+ * mdma_50_recovery_time: array of 4 elements for Tk timing for
+ * multi word DMA, Mode 0, 1 and 2 at 50 MHz. Range 0..15.
+ * mdma_66_active_time: array of 4 elements for Td timing for multi
+ * word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15.
+ * mdma_66_recovery_time: array of 4 elements for Tk timing for
+ * multi word DMA, Mode 0, 1 and 2 at 66 MHz. Range 0..15.
+ * udma_50_setup_time: array of 4 elements for Tvds timing for ultra
+ * DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz. Range 0..7.
+ * udma_50_hold_time: array of 4 elements for Tdvh timing for
+ * multi word DMA, Mode 0, 1, 2, 3, 4 and 5 at 50 MHz, Range 0..7.
+ * udma_66_setup_time: array of 4 elements for Tvds timing for multi
+ * word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7.
+ * udma_66_hold_time: array of 4 elements for Tdvh timing for
+ * multi word DMA, Mode 0, 1, 2, 3, 4, 5 and 6 at 66 MHz. Range 0..7.
+ */
+static const u8 pio_active_time[5] = {10, 10, 10, 3, 3};
+static const u8 pio_recovery_time[5] = {10, 3, 1, 3, 1};
+static const u8 mwdma_50_active_time[3] = {6, 2, 2};
+static const u8 mwdma_50_recovery_time[3] = {6, 2, 1};
+static const u8 mwdma_66_active_time[3] = {8, 3, 3};
+static const u8 mwdma_66_recovery_time[3] = {8, 2, 1};
+static const u8 udma_50_setup_time[6] = {3, 3, 2, 2, 1, 1};
+static const u8 udma_50_hold_time[6] = {3, 1, 1, 1, 1, 1};
+static const u8 udma_66_setup_time[7] = {4, 4, 3, 2, };
+static const u8 udma_66_hold_time[7] = {};
+
+static int pata_ftide010_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	const struct ata_port_info pi = ftide010_port_info[0];
+	const struct ata_port_info *ppi[] = { &pi, NULL };
+	struct ftide010 *ftide;
+	struct resource *res;
+	int irq;
+	int ret;
+	int i;
+
+	ftide = devm_kzalloc(dev, sizeof(*ftide), GFP_KERNEL);
+	if (!ftide)
+		return -ENOMEM;
+	ftide->dev = dev;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	ftide->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ftide->base))
+		return PTR_ERR(ftide->base);
+
+	ftide->pclk = devm_clk_get(dev, "PCLK");
+	if (!IS_ERR(ftide->pclk)) {
+		ret = clk_prepare_enable(ftide->pclk);
+		if (ret) {
+			dev_err(dev, "failed to enable PCLK\n");
+			return ret;
+		}
+	}
+
+	/*
+	 * Assign default timings, this can be augmented for different
+	 * compatible-strings in the future.
+	 */
+	for (i = 0; i < sizeof(ftide->pio_timings); i++) {
+		ftide->pio_timings[i] = (pio_active_time[i] << 4) |
+			pio_recovery_time[i];
+	}
+	for (i = 0; i < sizeof(ftide->mwdma_50_timings); i++) {
+		ftide->mwdma_50_timings[i] = (mwdma_50_active_time[i] << 4) |
+			mwdma_50_recovery_time[i];
+		ftide->mwdma_66_timings[i] = (mwdma_66_active_time[i] << 4) |
+			mwdma_66_recovery_time[i];
+	}
+	for (i = 0; i < sizeof(ftide->udma_50_timings); i++) {
+		ftide->udma_50_timings[i] = (udma_50_setup_time[6] << 4) |
+			udma_50_hold_time[i];
+		ftide->udma_66_timings[i] = (udma_66_setup_time[6] << 4) |
+			udma_66_hold_time[i];
+	}
+
+	/* Some special Cortina Gemini init, if needed */
+	if (of_device_is_compatible(np, "cortina,gemini-pata")) {
+		/*
+		 * We need to know which instance is probing (the
+		 * Gemini has two instances of FTIDE010) and we do
+		 * this simply by looking at the physical base
+		 * address, which is 0x63400000 for ATA1, else we
+		 * are ATA0. This will also set up the cable types.
+		 */
+		ret = pata_ftide010_gemini_init(ftide,
+				(res->start == 0x63400000));
+		if (ret)
+			goto err_dis_clk;
+	} else {
+		/* Else assume we are connected using PATA40 */
+		ftide->master_cbl = ATA_CBL_PATA40;
+		ftide->slave_cbl = ATA_CBL_PATA40;
+	}
+
+	ftide->host = ata_host_alloc_pinfo(dev, ppi, 1);
+	if (!ftide->host) {
+		ret = -ENOMEM;
+		goto err_dis_clk;
+	}
+	ftide->host->private_data = ftide;
+
+	for (i = 0; i < ftide->host->n_ports; i++) {
+		struct ata_port *ap = ftide->host->ports[i];
+		struct ata_ioports *ioaddr = &ap->ioaddr;
+
+		ioaddr->bmdma_addr = ftide->base + DMA_REG;
+		ioaddr->cmd_addr = ftide->base + CMD_DATA_REG;
+		ioaddr->ctl_addr = ftide->base + ALTSTAT_CTRL_REG;
+		ioaddr->altstatus_addr = ftide->base + ALTSTAT_CTRL_REG;
+		ata_sff_std_ports(ioaddr);
+	}
+
+	dev_info(dev, "device ID %08x, irq %d, io base 0x%08x\n",
+		 readl(ftide->base + IDE_DEVICE_ID), irq, res->start);
+
+	ret = ata_host_activate(ftide->host, irq, ata_bmdma_interrupt,
+				0, &pata_ftide010_sht);
+	if (ret)
+		goto err_dis_clk;
+
+	return 0;
+
+err_dis_clk:
+	if (!IS_ERR(ftide->pclk))
+		clk_disable_unprepare(ftide->pclk);
+	return ret;
+}
+
+static int pata_ftide010_remove(struct platform_device *pdev)
+{
+	struct ata_host *host = platform_get_drvdata(pdev);
+	struct ftide010 *ftide = host->private_data;
+
+	ata_host_detach(ftide->host);
+	if (!IS_ERR(ftide->pclk))
+		clk_disable_unprepare(ftide->pclk);
+
+	return 0;
+}
+
+static const struct of_device_id pata_ftide010_of_match[] = {
+	{
+		.compatible = "faraday,ftide010",
+	},
+	{},
+};
+
+static struct platform_driver pata_ftide010_driver = {
+	.driver = {
+		.name = "ftide010",
+		.of_match_table = of_match_ptr(pata_ftide010_of_match),
+	},
+	.probe = pata_ftide010_probe,
+	.remove = pata_ftide010_remove,
+};
+module_platform_driver(pata_ftide010_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pata-ftide010");
diff --git a/drivers/ata/sata_gemini.c b/drivers/ata/sata_gemini.c
new file mode 100644
index 000000000000..2618dbf5fc44
--- /dev/null
+++ b/drivers/ata/sata_gemini.c
@@ -0,0 +1,419 @@
+/*
+ * Cortina Systems Gemini SATA bridge add-on to Faraday FTIDE010
+ * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org>
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/bitops.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/delay.h>
+#include <linux/reset.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include "sata_gemini.h"
+
+/**
+ * struct sata_gemini - a state container for a Gemini SATA bridge
+ * @dev: the containing device
+ * @base: remapped I/O memory base
+ * @muxmode: the current muxing mode
+ * @ide_pins: if the device is using the plain IDE interface pins
+ * @sata_bridge: if the device enables the SATA bridge
+ * @sata0_reset: SATA0 reset handler
+ * @sata1_reset: SATA1 reset handler
+ * @sata0_pclk: SATA0 PCLK handler
+ * @sata1_pclk: SATA1 PCLK handler
+ */
+struct sata_gemini {
+	struct device *dev;
+	void __iomem *base;
+	enum gemini_muxmode muxmode;
+	bool ide_pins;
+	bool sata_bridge;
+	struct reset_control *sata0_reset;
+	struct reset_control *sata1_reset;
+	struct clk *sata0_pclk;
+	struct clk *sata1_pclk;
+};
+
+/* Global IDE PAD Skew Control Register */
+#define GLOBAL_IDE_SKEW_CTRL		0x18
+#define IDE1_HOST_STROBE_DELAY_SHIFT	28
+#define IDE1_DEVICE_STROBE_DELAY_SHIFT	24
+#define IDE1_OUTPUT_IO_SKEW_SHIFT	20
+#define IDE1_INPUT_IO_SKEW_SHIFT	16
+#define IDE0_HOST_STROBE_DELAY_SHIFT	12
+#define IDE0_DEVICE_STROBE_DELAY_SHIFT	8
+#define IDE0_OUTPUT_IO_SKEW_SHIFT	4
+#define IDE0_INPUT_IO_SKEW_SHIFT	0
+
+/* Miscellaneous Control Register */
+#define GLOBAL_MISC_CTRL		0x30
+/*
+ * Values of IDE IOMUX bits in the misc control register
+ *
+ * Bits 26:24 are "IDE IO Select", which decides what SATA
+ * adapters are connected to which of the two IDE/ATA
+ * controllers in the Gemini. We can connect the two IDE blocks
+ * to one SATA adapter each, both acting as master, or one IDE
+ * blocks to two SATA adapters so the IDE block can act in a
+ * master/slave configuration.
+ *
+ * We also bring out different blocks on the actual IDE
+ * pins (not SATA pins) if (and only if) these are muxed in.
+ *
+ * 111-100 - Reserved
+ * Mode 0: 000 - ata0 master <-> sata0
+ *               ata1 master <-> sata1
+ *               ata0 slave interface brought out on IDE pads
+ * Mode 1: 001 - ata0 master <-> sata0
+ *               ata1 master <-> sata1
+ *               ata1 slave interface brought out on IDE pads
+ * Mode 2: 010 - ata1 master <-> sata1
+ *               ata1 slave  <-> sata0
+ *               ata0 master and slave interfaces brought out
+ *                    on IDE pads
+ * Mode 3: 011 - ata0 master <-> sata0
+ *               ata1 slave  <-> sata1
+ *               ata1 master and slave interfaces brought out
+ *                    on IDE pads
+ */
+#define IDE_IOMUX_MASK			(7 << 24)
+#define IDE_IOMUX_MODE0			(0 << 24)
+#define IDE_IOMUX_MODE1			(1 << 24)
+#define IDE_IOMUX_MODE2			(2 << 24)
+#define IDE_IOMUX_MODE3			(3 << 24)
+#define IDE_IOMUX_SHIFT			(24)
+#define IDE_PADS_ENABLE			BIT(4)
+#define PFLASH_PADS_DISABLE		BIT(1)
+
+/*
+ * Registers directly controlling the PATA<->SATA adapters
+ */
+#define SATA_ID				0x00
+#define SATA_PHY_ID			0x04
+#define SATA0_STATUS			0x08
+#define SATA1_STATUS			0x0c
+#define SATA0_CTRL			0x18
+#define SATA1_CTRL			0x1c
+
+#define SATA_STATUS_BIST_DONE		BIT(5)
+#define SATA_STATUS_BIST_OK		BIT(4)
+#define SATA_STATUS_PHY_READY		BIT(0)
+
+#define SATA_CTRL_PHY_BIST_EN		BIT(14)
+#define SATA_CTRL_PHY_FORCE_IDLE	BIT(13)
+#define SATA_CTRL_PHY_FORCE_READY	BIT(12)
+#define SATA_CTRL_PHY_AFE_LOOP_EN	BIT(10)
+#define SATA_CTRL_PHY_DIG_LOOP_EN	BIT(9)
+#define SATA_CTRL_HOTPLUG_DETECT_EN	BIT(4)
+#define SATA_CTRL_ATAPI_EN		BIT(3)
+#define SATA_CTRL_BUS_WITH_20		BIT(2)
+#define SATA_CTRL_SLAVE_EN		BIT(1)
+#define SATA_CTRL_EN			BIT(0)
+
+/*
+ * There is only ever one instance of this bridge on a system,
+ * so create a singleton so that the FTIDE010 instances can grab
+ * a reference to it.
+ */
+static struct sata_gemini *sg_singleton;
+
+struct sata_gemini *gemini_sata_bridge_get(void)
+{
+	if (sg_singleton)
+		return sg_singleton;
+	return ERR_PTR(-EPROBE_DEFER);
+}
+EXPORT_SYMBOL(gemini_sata_bridge_get);
+
+bool gemini_sata_bridge_enabled(struct sata_gemini *sg, bool is_ata1)
+{
+	if (!sg->sata_bridge)
+		return false;
+	/*
+	 * In muxmode 2 and 3 one of the ATA controllers is
+	 * actually not connected to any SATA bridge.
+	 */
+	if ((sg->muxmode == GEMINI_MUXMODE_2) &&
+	    !is_ata1)
+		return false;
+	if ((sg->muxmode == GEMINI_MUXMODE_3) &&
+	    is_ata1)
+		return false;
+
+	return true;
+}
+EXPORT_SYMBOL(gemini_sata_bridge_enabled);
+
+enum gemini_muxmode gemini_sata_get_muxmode(struct sata_gemini *sg)
+{
+	return sg->muxmode;
+}
+EXPORT_SYMBOL(gemini_sata_get_muxmode);
+
+static int gemini_sata_setup_bridge(struct sata_gemini *sg,
+				    unsigned int bridge)
+{
+	unsigned long timeout = jiffies + (HZ * 1);
+	bool bridge_online;
+	u32 val;
+
+	if (bridge == 0) {
+		val = SATA_CTRL_HOTPLUG_DETECT_EN | SATA_CTRL_EN;
+		/* SATA0 slave mode is only used in muxmode 2 */
+		if (sg->muxmode == GEMINI_MUXMODE_2)
+			val |= SATA_CTRL_SLAVE_EN;
+		writel(val, sg->base + SATA0_CTRL);
+	} else {
+		val = SATA_CTRL_HOTPLUG_DETECT_EN | SATA_CTRL_EN;
+		/* SATA1 slave mode is only used in muxmode 3 */
+		if (sg->muxmode == GEMINI_MUXMODE_3)
+			val |= SATA_CTRL_SLAVE_EN;
+		writel(val, sg->base + SATA1_CTRL);
+	}
+
+	/* Vendor code waits 10 ms here */
+	msleep(10);
+
+	/* Wait for PHY to become ready */
+	do {
+		msleep(100);
+
+		if (bridge == 0)
+			val = readl(sg->base + SATA0_STATUS);
+		else
+			val = readl(sg->base + SATA1_STATUS);
+		if (val & SATA_STATUS_PHY_READY)
+			break;
+	} while (time_before(jiffies, timeout));
+
+	bridge_online = !!(val & SATA_STATUS_PHY_READY);
+
+	dev_info(sg->dev, "SATA%d PHY %s\n", bridge,
+		 bridge_online ? "ready" : "not ready");
+
+	return bridge_online ? 0: -ENODEV;
+}
+
+int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge)
+{
+	struct clk *pclk;
+	int ret;
+
+	if (bridge == 0)
+		pclk = sg->sata0_pclk;
+	else
+		pclk = sg->sata1_pclk;
+	clk_enable(pclk);
+	msleep(10);
+
+	/* Do not keep clocking a bridge that is not online */
+	ret = gemini_sata_setup_bridge(sg, bridge);
+	if (ret)
+		clk_disable(pclk);
+
+	return ret;
+}
+EXPORT_SYMBOL(gemini_sata_start_bridge);
+
+void gemini_sata_stop_bridge(struct sata_gemini *sg, unsigned int bridge)
+{
+	if (bridge == 0)
+		clk_disable(sg->sata0_pclk);
+	else if (bridge == 1)
+		clk_disable(sg->sata1_pclk);
+}
+EXPORT_SYMBOL(gemini_sata_stop_bridge);
+
+int gemini_sata_reset_bridge(struct sata_gemini *sg,
+			     unsigned int bridge)
+{
+	if (bridge == 0)
+		reset_control_reset(sg->sata0_reset);
+	else
+		reset_control_reset(sg->sata1_reset);
+	msleep(10);
+	return gemini_sata_setup_bridge(sg, bridge);
+}
+EXPORT_SYMBOL(gemini_sata_reset_bridge);
+
+static int gemini_sata_bridge_init(struct sata_gemini *sg)
+{
+	struct device *dev = sg->dev;
+	u32 sata_id, sata_phy_id;
+	int ret;
+
+	sg->sata0_pclk = devm_clk_get(dev, "SATA0_PCLK");
+	if (IS_ERR(sg->sata0_pclk)) {
+		dev_err(dev, "no SATA0 PCLK");
+		return -ENODEV;
+	}
+	sg->sata1_pclk = devm_clk_get(dev, "SATA1_PCLK");
+	if (IS_ERR(sg->sata1_pclk)) {
+		dev_err(dev, "no SATA1 PCLK");
+		return -ENODEV;
+	}
+
+	ret = clk_prepare_enable(sg->sata0_pclk);
+	if (ret) {
+		pr_err("failed to enable SATA0 PCLK\n");
+		return ret;
+	}
+	ret = clk_prepare_enable(sg->sata1_pclk);
+	if (ret) {
+		pr_err("failed to enable SATA1 PCLK\n");
+		return ret;
+	}
+
+	sg->sata0_reset = devm_reset_control_get(dev, "sata0");
+	if (IS_ERR(sg->sata0_reset)) {
+		dev_err(dev, "no SATA0 reset controller\n");
+		return PTR_ERR(sg->sata0_reset);
+	}
+	sg->sata1_reset = devm_reset_control_get(dev, "sata1");
+	if (IS_ERR(sg->sata1_reset)) {
+		dev_err(dev, "no SATA1 reset controller\n");
+		return PTR_ERR(sg->sata1_reset);
+	}
+
+	sata_id = readl(sg->base + SATA_ID);
+	sata_phy_id = readl(sg->base + SATA_PHY_ID);
+	sg->sata_bridge = true;
+	clk_disable(sg->sata0_pclk);
+	clk_disable(sg->sata1_pclk);
+
+	dev_info(dev, "SATA ID %08x, PHY ID: %08x\n", sata_id, sata_phy_id);
+
+	return 0;
+}
+
+static int gemini_sata_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct sata_gemini *sg;
+	static struct regmap *map;
+	struct resource *res;
+	enum gemini_muxmode muxmode;
+	u32 gmode;
+	u32 gmask;
+	u32 val;
+	int ret;
+
+	sg = devm_kzalloc(dev, sizeof(*sg), GFP_KERNEL);
+	if (!sg)
+		return -ENOMEM;
+	sg->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res)
+		return -ENODEV;
+
+	sg->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(sg->base))
+		return PTR_ERR(sg->base);
+
+	map = syscon_regmap_lookup_by_phandle(np, "syscon");
+	if (IS_ERR(map)) {
+		dev_err(dev, "no global syscon\n");
+		return PTR_ERR(map);
+	}
+
+	/* Set up the SATA bridge if need be */
+	if (of_property_read_bool(np, "cortina,gemini-enable-sata-bridge")) {
+		ret = gemini_sata_bridge_init(sg);
+		if (ret)
+			return ret;
+	}
+
+	if (of_property_read_bool(np, "cortina,gemini-enable-ide-pins"))
+		sg->ide_pins = true;
+
+	if (!sg->sata_bridge && !sg->ide_pins) {
+		dev_err(dev, "neither SATA bridge or IDE output enabled\n");
+		return -EINVAL;
+	}
+
+	ret = of_property_read_u32(np, "cortina,gemini-ata-muxmode", &muxmode);
+	if (ret) {
+		dev_err(dev, "could not parse ATA muxmode\n");
+		return ret;
+	}
+	if (muxmode > GEMINI_MUXMODE_3) {
+		dev_err(dev, "illegal muxmode %d\n", muxmode);
+		return -EINVAL;
+	}
+	sg->muxmode = muxmode;
+	gmask = IDE_IOMUX_MASK;
+	gmode = (muxmode << IDE_IOMUX_SHIFT);
+
+	/*
+	 * If we mux out the IDE, parallel flash must be disabled.
+	 * SATA0 and SATA1 have dedicated pins and may coexist with
+	 * parallel flash.
+	 */
+	if (sg->ide_pins)
+		gmode |= IDE_PADS_ENABLE | PFLASH_PADS_DISABLE;
+	else
+		gmask |= IDE_PADS_ENABLE;
+
+	ret = regmap_update_bits(map, GLOBAL_MISC_CTRL, gmask, gmode);
+	if (ret) {
+		dev_err(dev, "unable to set up IDE muxing\n");
+		return -ENODEV;
+	}
+
+	/* FIXME: add more elaborate IDE skew control handling */
+	if (sg->ide_pins) {
+		ret = regmap_read(map, GLOBAL_IDE_SKEW_CTRL, &val);
+		if (ret) {
+			dev_err(dev, "cannot read IDE skew control register\n");
+			return ret;
+		}
+		dev_info(dev, "IDE skew control: %08x\n", val);
+	}
+
+	dev_info(dev, "set up the Gemini IDE/SATA nexus\n");
+	platform_set_drvdata(pdev, sg);
+	sg_singleton = sg;
+
+	return 0;
+}
+
+static int gemini_sata_remove(struct platform_device *pdev)
+{
+	struct sata_gemini *sg = platform_get_drvdata(pdev);
+
+	clk_unprepare(sg->sata0_pclk);
+	clk_unprepare(sg->sata1_pclk);
+	sg_singleton = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id gemini_sata_of_match[] = {
+	{
+		.compatible = "cortina,gemini-sata-bridge",
+	},
+	{},
+};
+
+static struct platform_driver gemini_sata_driver = {
+	.driver = {
+		.name = "gemini-sata-bridge",
+		.of_match_table = of_match_ptr(gemini_sata_of_match),
+	},
+	.probe = gemini_sata_probe,
+	.remove = gemini_sata_remove,
+};
+module_platform_driver(gemini_sata_driver);
+
+MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:gemini-sata-bridge");
diff --git a/drivers/ata/sata_gemini.h b/drivers/ata/sata_gemini.h
new file mode 100644
index 000000000000..ca1837a394c8
--- /dev/null
+++ b/drivers/ata/sata_gemini.h
@@ -0,0 +1,21 @@
+/* Header for the Gemini SATA bridge */
+#ifndef SATA_GEMINI_H
+#define SATA_GEMINI_H
+
+struct sata_gemini;
+
+enum gemini_muxmode {
+	GEMINI_MUXMODE_0 = 0,
+	GEMINI_MUXMODE_1,
+	GEMINI_MUXMODE_2,
+	GEMINI_MUXMODE_3,
+};
+
+struct sata_gemini *gemini_sata_bridge_get(void);
+bool gemini_sata_bridge_enabled(struct sata_gemini *sg, bool is_ata1);
+enum gemini_muxmode gemini_sata_get_muxmode(struct sata_gemini *sg);
+int gemini_sata_start_bridge(struct sata_gemini *sg, unsigned int bridge);
+void gemini_sata_stop_bridge(struct sata_gemini *sg, unsigned int bridge);
+int gemini_sata_reset_bridge(struct sata_gemini *sg, unsigned int bridge);
+
+#endif
