diff mbox

[51/64] alim15x3: fix handling of address setup timings

Message ID 20100118172105.14623.5133.sendpatchset@localhost
State Accepted
Delegated to: David Miller
Headers show

Commit Message

Bartlomiej Zolnierkiewicz Jan. 18, 2010, 5:21 p.m. UTC 
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Subject: [PATCH] alim15x3: fix handling of address setup timings

Account for the requirements of the other device on the port.

Based on libata pata_ali host driver.

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
---
 drivers/ide/alim15x3.c |   11 +++++++++++
 1 file changed, 11 insertions(+)

--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Comments

David Miller Jan. 19, 2010, 9:53 a.m. UTC | #1 
From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date: Mon, 18 Jan 2010 18:21:05 +0100

> From: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
> Subject: [PATCH] alim15x3: fix handling of address setup timings
> 
> Account for the requirements of the other device on the port.
> 
> Based on libata pata_ali host driver.
> 
> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

Index: b/drivers/ide/alim15x3.c
===================================================================
--- a/drivers/ide/alim15x3.c
+++ b/drivers/ide/alim15x3.c
@@ -72,6 +72,7 @@  static void ali_fifo_control(ide_hwif_t
 static void ali_set_pio_mode(ide_hwif_t *hwif, ide_drive_t *drive)
 {
 	struct pci_dev *dev = to_pci_dev(hwif->dev);
+	ide_drive_t *pair = ide_get_pair_dev(drive);
 	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
 	unsigned long T =  1000000 / bus_speed; /* PCI clock based */
 	int port = hwif->channel ? 0x5c : 0x58;
@@ -79,6 +80,16 @@  static void ali_set_pio_mode(ide_hwif_t
 	struct ide_timing t;
 
 	ide_timing_compute(drive, drive->pio_mode, &t, T, 1);
+	if (pair) {
+		struct ide_timing p;
+
+		ide_timing_compute(pair, pair->pio_mode, &p, T, 1);
+		ide_timing_merge(&p, &t, &t, IDE_TIMING_SETUP);
+		if (pair->dma_mode) {
+			ide_timing_compute(pair, pair->dma_mode, &p, T, 1);
+			ide_timing_merge(&p, &t, &t, IDE_TIMING_SETUP);
+		}
+	}
 
 	t.setup = clamp_val(t.setup, 1, 8) & 7;
 	t.active = clamp_val(t.active, 1, 8) & 7;