[04/10] phy: phy_brcmstb_sata: make the driver buildable on BMIPS_GENERIC

The BCM7xxx ARM and MIPS platforms share a similar hardware block for AHCI
SATA3 PHY.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
---
 drivers/phy/Kconfig | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

2015-10-22 18:44 GMT-07:00 Jaedon Shin <jaedon.shin@gmail.com>:
> The BCM7xxx ARM and MIPS platforms share a similar hardware block for AHCI
> SATA3 PHY.
>
> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>

Acked-by: Florian Fainelli <f.fainelli@gmail.com>

> ---
>  drivers/phy/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 47da573d0bab..c83e48661fd7 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -364,11 +364,11 @@ config PHY_TUSB1210
>
>  config PHY_BRCMSTB_SATA
>         tristate "Broadcom STB SATA PHY driver"
> -       depends on ARCH_BRCMSTB
> +       depends on ARCH_BRCMSTB || BMIPS_GENERIC
>         depends on OF
>         select GENERIC_PHY
>         help
> -         Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
> +         Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
>           Likely useful only with CONFIG_SATA_BRCMSTB enabled.
>
>  endmenu
> --
> 2.6.2
>

+Brian Norris

Hi,

On Friday 23 October 2015 07:14 AM, Jaedon Shin wrote:
> The BCM7xxx ARM and MIPS platforms share a similar hardware block for AHCI
> SATA3 PHY.
> 
> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
> ---
>  drivers/phy/Kconfig | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
> index 47da573d0bab..c83e48661fd7 100644
> --- a/drivers/phy/Kconfig
> +++ b/drivers/phy/Kconfig
> @@ -364,11 +364,11 @@ config PHY_TUSB1210
>  
>  config PHY_BRCMSTB_SATA
>  	tristate "Broadcom STB SATA PHY driver"
> -	depends on ARCH_BRCMSTB
> +	depends on ARCH_BRCMSTB || BMIPS_GENERIC

Nice to see the same driver is been used across multiple platforms.
Cc'ed Brian who is the author of brcmstb-sata.c

Thanks
Kishon
>  	depends on OF
>  	select GENERIC_PHY
>  	help
> -	  Enable this to support the SATA3 PHY on 28nm Broadcom STB SoCs.
> +	  Enable this to support the SATA3 PHY on 28nm or 40nm Broadcom STB SoCs.
>  	  Likely useful only with CONFIG_SATA_BRCMSTB enabled.
>  
>  endmenu
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

On Fri, Oct 23, 2015 at 10:44:17AM +0900, Jaedon Shin wrote:
> The BCM7xxx ARM and MIPS platforms share a similar hardware block for AHCI
> SATA3 PHY.
> 
> Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>

Acked-by: Brian Norris <computersforpeace@gmail.com>
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html