@@ -933,7 +933,11 @@ static void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk,
* block specified for the ATA pass through commands. Regardless
* of whether the command errored or not, return a sense
* block. Copy all controller registers into the sense
- * block. Clear sense key, ASC & ASCQ if there is no error.
+ * block. If there was no error, we get the request from an ATA
+ * passthrough command, so we use the following sense data:
+ * sk = RECOVERED ERROR
+ * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE
+ *
*
* LOCKING:
* None.
@@ -959,6 +963,10 @@ static void ata_gen_passthru_sense(struct ata_queued_cmd *qc)
ata_to_sense_error(qc->ap->print_id, tf->command, tf->feature,
&sb[1], &sb[2], &sb[3], verbose);
sb[1] &= 0x0f;
+ } else {
+ sb[1] = RECOVERED_ERROR;
+ sb[2] = 0;
+ sb[3] = 0x1D;
}
/*
@@ -1733,10 +1741,12 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
/* For ATA pass thru (SAT) commands, generate a sense block if
* user mandated it or if there's an error. Note that if we
- * generate because the user forced us to, a check condition
- * is generated and the ATA register values are returned
+ * generate because the user forced us to [CK_COND =1], a check
+ * condition is generated and the ATA register values are returned
* whether the command completed successfully or not. If there
- * was no error, SK, ASC and ASCQ will all be zero.
+ * was no error, we use the following sense data:
+ * sk = RECOVERED ERROR
+ * asc,ascq = ATA PASS-THROUGH INFORMATION AVAILABLE
*/
if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
((cdb[2] & 0x20) || need_sense)) {
When the user application sends a ATA_12 or ATA_16 PASSTHROUGH scsi command, put the task file register in the sense data with the proper Sense Key. Instead of NO SENSE, set RECOVERED, as specified in [SAT2]12.2.5 Table 92. Tested: Using udev ata_id to generate a passthrough command, IDENTIFY: before: sd 0:0:0:0: [sda] CDB: ATA command pass through(12)/Blank: \ a1 08 2e 00 01 00 00 00 00 ec 00 00 sd 0:0:0:0: [sda] Sense Key : No Sense [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 00 00 00 00 00 00 0e 09 0c 00 00 00 00 00 3f 00 18 00 a6 e0 50 after sd 0:0:0:0: [sda] CDB: ATA command pass through(12)/Blank: \ a1 08 2e 00 01 00 00 00 00 ec 00 00 sd 0:0:0:0: [sda] Sense Key : Recovered Error [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 01 00 1d 00 00 00 0e 09 0c 00 00 00 01 00 00 00 00 00 00 00 50 Signed-off-by: Gwendal Grignou <gwendal@google.com> --- drivers/ata/libata-scsi.c | 18 ++++++++++++++---- 1 files changed, 14 insertions(+), 4 deletions(-)