| [2/2] drivers/ide/cy82c693.c: Add missing pci_dev_put |
0
0
0
|
2011-07-28 |
Julia Lawall |
davem |
Accepted |
| [1/1] ata: Add iMX pata support |
0
0
0
|
2011-07-26 |
Arnaud Patard (Rtp) |
davem |
Not Applicable |
| [git,patches] libata updates for 3.1 |
0
0
0
|
2011-07-24 |
Jeff Garzik |
davem |
Not Applicable |
| [v3,1/1] ata: Add iMX pata support |
0
0
0
|
2011-07-24 |
Arnaud Patard (Rtp) |
davem |
Not Applicable |
| Prevent warning during PMP error recovery |
1
0
0
|
2011-07-22 |
Gwendal Grignou |
davem |
Not Applicable |
| [1/1] ata: Add iMX pata support |
0
0
0
|
2011-07-22 |
Arnaud Patard (Rtp) |
davem |
Not Applicable |
| [#upstream] ahci: start engine only during soft/hard resets |
0
0
1
|
2011-07-22 |
Tejun Heo |
davem |
Not Applicable |
| ahci_start_engine compliance with AHCI spec |
0
0
0
|
2011-07-21 |
Brian Norris |
davem |
Not Applicable |
| pata_via: Add SATA registers for VX800 SATA/PATA controller |
0
0
0
|
2011-07-19 |
Rafał Bilski |
davem |
Not Applicable |
| [34/34] Remove old DMI & SMBIOS code and make SMBIOS default on |
0
0
0
|
2011-07-18 |
Prarit Bhargava |
davem |
Not Applicable |
| [13/34] drivers/ide changes for SMBIOS and System Firmware |
0
0
0
|
2011-07-18 |
Prarit Bhargava |
davem |
Not Applicable |
| [05/34] drivers/ata changes for SMBIOS and System Firmware |
1
0
0
|
2011-07-18 |
Prarit Bhargava |
davem |
Not Applicable |
| [02/34] New SMBIOS driver for x86 and ia64. |
0
0
0
|
2011-07-18 |
Prarit Bhargava |
davem |
Not Applicable |
| [01/34] System Firmware Interface |
0
0
0
|
2011-07-18 |
Prarit Bhargava |
davem |
Not Applicable |
| [1/1] ata: Add iMX pata support |
0
0
0
|
2011-07-16 |
Arnaud Patard (Rtp) |
davem |
Not Applicable |
| Prevent warning during PMP error recovery |
0
0
0
|
2011-07-16 |
Gwendal Grignou |
davem |
Not Applicable |
| Prevent warning during PMP error recovery |
1
0
0
|
2011-07-16 |
Gwendal Grignou |
davem |
Not Applicable |
| [3.0-rc7] ahci: RAID-mode SATA patch for Intel Panther Point DeviceIDs |
0
0
0
|
2011-07-14 |
Seth Heasley |
davem |
Not Applicable |
| sata_mv WARNING: at drivers/ata/libata-sff.c:1322 |
0
0
0
|
2011-07-14 |
Gwendal Grignou |
davem |
Not Applicable |
| Problem w/ hotplug on sata_sil24 w/ PMP (sil3726) |
0
0
0
|
2011-07-13 |
Tejun Heo |
davem |
Not Applicable |
| [5/5] davinci: da850 evm: register SATA device |
0
0
0
|
2011-07-06 |
Sekhar Nori |
davem |
Not Applicable |
| [v3,4/5] davinci: da850: add support for SATA interface |
0
0
0
|
2011-07-06 |
Sekhar Nori |
davem |
Not Applicable |
| [v2,3/5] davinci: enable forced transitions on PSC |
0
0
0
|
2011-07-06 |
Sekhar Nori |
davem |
Not Applicable |
| [2/5] davinci: pass clock flags to davinci_psc_config() |
0
0
0
|
2011-07-06 |
Sekhar Nori |
davem |
Not Applicable |
| [1/5] davinci: psc.h: clean up indentation done using spaces |
0
0
0
|
2011-07-06 |
Sekhar Nori |
davem |
Not Applicable |
| pata_it821x: Fix RAID type display |
0
0
0
|
2011-07-04 |
Jean Delvare |
davem |
Not Applicable |
| [-resend] ata: sata_dwc_460ex: fix error path |
0
0
0
|
2011-07-03 |
Vasiliy Kulikov |
davem |
Not Applicable |
| [#upstream-fixes] libata: report link resume failure as KERN_WARNING instead of ERR |
0
0
0
|
2011-07-01 |
Tejun Heo |
davem |
Not Applicable |
| Suppressing ATA errors on boot |
0
0
0
|
2011-06-30 |
Tejun Heo |
davem |
Not Applicable |
| [1/1] ahci: Enable SB600 64bit DMA on Asus M3A |
1
0
0
|
2011-06-27 |
Mark Nelson |
davem |
Not Applicable |
| [0/1] ahci: Enable SB600 64bit DMA on Asus M3A |
0
0
0
|
2011-06-27 |
Mark Nelson |
davem |
Not Applicable |
| acpi: constify ops structs |
1
0
0
|
2011-06-25 |
Vasiliy Kulikov |
davem |
Not Applicable |
| [git,patches] libata fixes (rebased) |
0
0
0
|
2011-06-24 |
Jeff Garzik |
davem |
Not Applicable |
| [git,patches] libata fixes |
0
0
0
|
2011-06-23 |
Jeff Garzik |
davem |
Not Applicable |
| mmotm 2011-06-22 - inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. |
0
0
0
|
2011-06-23 |
Valdis.Kletnieks@vt.edu |
davem |
Not Applicable |
| [#upstream-fixes] libata: apply NOSETXFER horkage to the affected drives regardless of firmware revision |
0
0
0
|
2011-06-22 |
Tejun Heo |
davem |
Not Applicable |
| [v5] ahci: move ahci_sb600_softreset to libahci.c and rename it |
1
0
0
|
2011-06-21 |
Yuan-Hsin Chen |
davem |
Not Applicable |
| [01/11] drivers/ide: use printk_ratelimited() instead of printk_ratelimit() |
0
0
0
|
2011-06-20 |
Manuel Zerpies |
davem |
Not Applicable |
| [v4] ahci: move ahci_sb600_softreset to libahci.c and rename it |
0
0
0
|
2011-06-20 |
Yuan-Hsin Chen |
davem |
Not Applicable |
| [v3] ahci: move ahci_sb600_softreset to libahci.c and rename it |
0
0
0
|
2011-06-17 |
Yuan-Hsin Chen |
davem |
Not Applicable |
| ata: remove unnecessary code |
2
0
0
|
2011-06-16 |
Greg Dietsche |
davem |
Not Applicable |
| libata/sas: only set FROZEN flag if new EH is supported |
0
0
0
|
2011-06-16 |
Nishanth Aravamudan |
davem |
Not Applicable |
| [01/11] drivers/ide: use printk_ratelimited() instead of printk_ratelimit() |
0
0
0
|
2011-06-16 |
Manuel Zerpies |
davem |
Not Applicable |
| libata/ipr/powerpc: regression between 2.6.39-rc4 and 2.6.39-rc5 |
0
0
0
|
2011-06-15 |
Nishanth Aravamudan |
davem |
Not Applicable |
| [v2] ahci: fix pmp softreset with HDD |
0
0
0
|
2011-06-15 |
Yuan-Hsin Chen |
davem |
Not Applicable |
| ahci: enable pmp but connected to HDD issue fixed |
0
0
0
|
2011-06-14 |
Yuan-Hsin Chen |
davem |
Not Applicable |
| SiI 3726 pmp doesn't work with 2.6.38 and Marvell 88SE9123 AHCI controller |
0
0
0
|
2011-06-10 |
Hubert Bailey |
davem |
Not Applicable |
| SiI 3726 pmp doesn't work with 2.6.38 and Marvell 88SE9123 AHCI controller |
0
0
0
|
2011-06-10 |
Tejun Heo |
davem |
Not Applicable |
| [git] libata fix |
0
0
0
|
2011-06-10 |
Jeff Garzik |
davem |
Not Applicable |
| SiI 3726 pmp doesn't work with 2.6.38 and Marvell 88SE9123 AHCI controller |
0
0
0
|
2011-06-09 |
Tejun Heo |
davem |
Not Applicable |
| ata/ahci_platform: Add support for enabling/disabling clock. |
0
0
0
|
2011-06-09 |
Viresh KUMAR |
davem |
Not Applicable |
| [Resend] ATA: Debugging options for the ATA subsystem |
0
0
0
|
2011-06-09 |
Viresh KUMAR |
davem |
Not Applicable |
| ATA: Debugging options for the ATA subsystem |
0
0
0
|
2011-06-08 |
Viresh KUMAR |
davem |
Not Applicable |
| SiI 3726 pmp doesn't work with 2.6.38 and Marvell 88SE9123 AHCI controller |
0
0
0
|
2011-06-07 |
Tim Small |
davem |
Not Applicable |
| ide-cd: signedness warning fix again |
0
0
0
|
2011-06-02 |
Connor Hansen |
davem |
Accepted |
| [025/146] ide: Convert to bdops->check_events() |
0
0
0
|
2011-06-01 |
gregkh@suse.de |
davem |
Not Applicable |
| [2/2] ide-cd: Fix another signedness warning |
0
0
0
|
2011-05-30 |
Connor Hansen |
davem |
Rejected |
| [1/2] ide-cd: Fix signedness warning |
0
0
0
|
2011-05-30 |
Connor Hansen |
davem |
Rejected |
| [v1] drivers: Use kzalloc instead of 'kmalloc+memset', where possible |
0
0
0
|
2011-05-26 |
Rakib Mullick |
davem |
Not Applicable |
| [UPDATED,#upstream-fixes] libata: fix unexpectedly frozen port after ata_eh_reset() |
0
0
0
|
2011-05-25 |
Tejun Heo |
davem |
Not Applicable |
| [#upstream] libata: leave port thawed after reset failure |
0
0
0
|
2011-05-25 |
Tejun Heo |
davem |
Not Applicable |
| [#upstream-fixes] libata: fix unexpectedly frozen port after ata_eh_reset() |
0
0
0
|
2011-05-25 |
Tejun Heo |
davem |
Not Applicable |
| sata_mv port lockup on hotplug (kernel 2.6.38.2) |
0
0
0
|
2011-05-25 |
Tejun Heo |
davem |
Not Applicable |
| [4/4] libsas: Add option for SATA soft reset |
0
0
0
|
2011-05-24 |
Dan Williams |
davem |
Not Applicable |
| [3/4] libsas: check dev->gone before submitting sata i/o |
1
0
0
|
2011-05-24 |
Dan Williams |
davem |
Not Applicable |
| [2/4] libsas: fix/amend device gone notification in sas_deform_port() |
0
0
0
|
2011-05-24 |
Dan Williams |
davem |
Not Applicable |
| [1/4] libsas: flush initial device discovery before completing ->scan_finished() |
0
0
0
|
2011-05-24 |
Dan Williams |
davem |
Not Applicable |
| [-next] ata: PATA_ARASAN_CF depends on DMADEVICES |
1
0
0
|
2011-05-23 |
Randy Dunlap |
davem |
Not Applicable |
| [git,patches] libata updates for 2.6.40 |
0
0
0
|
2011-05-20 |
Jeff Garzik |
davem |
Not Applicable |
| Support for dual-drive pmp? 0x197b:0x2352 |
0
0
0
|
2011-05-18 |
Mark Lord |
davem |
Not Applicable |
| libata: Use Maximum Write Same Length to report discard size limit |
0
0
0
|
2011-05-18 |
Martin K. Petersen |
davem |
Not Applicable |
| ATA: Don't powerdown Compaq Triflex IDE device on suspend |
0
0
0
|
2011-05-15 |
Mikulas Patocka |
davem |
Not Applicable |
| IDE: Don't powerdown Compaq Triflex IDE device on suspend |
0
1
0
|
2011-05-15 |
Mikulas Patocka |
davem |
Changes Requested |
| [git] libata fix |
0
0
0
|
2011-05-14 |
Jeff Garzik |
davem |
Not Applicable |
| [v2.6.38-rc7] Revert "libata: ahci_start_engine compliant to AHCI spec" |
0
0
0
|
2011-05-14 |
Tejun Heo |
davem |
Not Applicable |
| libata SATL: WWN for device id VPD page |
0
0
0
|
2011-05-14 |
Douglas Gilbert |
davem |
Not Applicable |
| pata_at91: SMC settings calculation bugfixes, support for t6z and IORDY |
0
0
0
|
2011-05-12 |
Igor Plyatov |
davem |
Not Applicable |
| AHCI driver problem on SB700/SB800 w/ Acer Ferrari One |
0
0
0
|
2011-05-11 |
Rafael J. Wysocki |
davem |
Not Applicable |
| [#upstream-fixes] libata: fix oops when LPM is used with PMP |
0
0
0
|
2011-05-09 |
Tejun Heo |
davem |
Not Applicable |
| ide: Use linux/mutex.h |
0
0
0
|
2011-05-08 |
Anton Blanchard |
davem |
Accepted |
| [2/3] libsas: fix/amend device gone notification in sas_deform_port() |
0
0
0
|
2011-05-06 |
Dan Williams |
davem |
Not Applicable |
| [v3,2/3] block: hold queue if flush is running for non-queueable flush drive |
0
0
0
|
2011-05-06 |
Shaohua Li |
davem |
Not Applicable |
| [v3,3/3] SATA: enable non-queueable flush flag |
2
0
0
|
2011-05-05 |
Shaohua Li |
davem |
Not Applicable |
| [v3,2/3] block: hold queue if flush is running for non-queueable flush drive |
1
0
0
|
2011-05-05 |
Shaohua Li |
davem |
Not Applicable |
| [v3,1/3] block: add a non-queueable flush flag |
1
0
0
|
2011-05-05 |
Shaohua Li |
davem |
Not Applicable |
| [v2,3/3] SATA: enable non-queueable flush flag |
0
0
0
|
2011-05-04 |
Shaohua Li |
davem |
Not Applicable |
| [v2,2/3] block: hold queue if flush is running for non-queueable flush drive |
0
0
0
|
2011-05-04 |
Shaohua Li |
davem |
Not Applicable |
| [v2,1/3] block: add a non-queueable flush flag |
0
0
0
|
2011-05-04 |
Shaohua Li |
davem |
Not Applicable |
| [1/3] New driver mtipx2xx submission |
0
0
0
|
2011-05-03 |
Asai Thambi Samymuthu Pattrayasamy (asamymuthupa) [CONTRACTOR] |
davem |
Not Applicable |
| [3/3] libsas: check dev->gone before submitting sata i/o |
1
0
0
|
2011-05-03 |
Dan Williams |
davem |
Not Applicable |
| [2/3] libsas: fix/amend device gone notification in sas_deform_port() |
0
0
0
|
2011-05-03 |
Dan Williams |
davem |
Not Applicable |
| [1/3] libsas: flush initial device discovery before completing ->scan_finished() |
1
0
0
|
2011-05-03 |
Dan Williams |
davem |
Not Applicable |
| ide/ide-scan-pci.c: Use for_each_pci_dev(). |
0
0
0
|
2011-05-01 |
Thiago Farina |
davem |
Accepted |
| sata_mv port lockup on hotplug (kernel 2.6.38.2) |
0
0
0
|
2011-04-30 |
Tejun Heo |
davem |
Not Applicable |
| [v2] support for PMP used in TT BlackX Duet drive dock |
0
0
0
|
2011-04-28 |
Pavel Herrmann |
davem |
Not Applicable |
| [1/2] block: optimize non-queueable flush request drive |
0
0
0
|
2011-04-28 |
Shaohua Li |
davem |
Not Applicable |
| sata_mv port lockup on hotplug (kernel 2.6.38.2) |
0
0
0
|
2011-04-26 |
Tejun Heo |
davem |
Not Applicable |
| [0/2] libata-sff: prevent irq descriptions for dummy ports |
0
0
0
|
2011-04-24 |
James Bottomley |
davem |
Not Applicable |
| [1/2] pata_cm64x: fix boot crash on parisc |
0
0
0
|
2011-04-24 |
James Bottomley |
davem |
Not Applicable |
| [git,patches] libata bug fixes |
0
0
0
|
2011-04-24 |
Jeff Garzik |
davem |
Not Applicable |
