@@ -16,6 +16,9 @@ Required Properties:
Optional Properties:
- reset-gpios: Reference to the GPIO connected to the reset input.
+ - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
+ children in idle state. This is necessary for example, if there are several
+ multiplexers on the bus and the devices behind them use same I2C addresses.
Example:
@@ -41,6 +41,7 @@
#include <linux/i2c-mux.h>
#include <linux/i2c/pca954x.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/pm.h>
#include <linux/slab.h>
@@ -186,6 +187,9 @@ static int pca954x_probe(struct i2c_client *client,
{
struct i2c_adapter *adap = to_i2c_adapter(client->dev.parent);
struct pca954x_platform_data *pdata = dev_get_platdata(&client->dev);
+ struct device_node *np = client->dev.of_node;
+ struct device_node *of_node = client->dev.of_node;
+ bool idle_disconnect_dt;
struct gpio_desc *gpio;
int num, force, class;
struct pca954x *data;
@@ -217,10 +221,14 @@ static int pca954x_probe(struct i2c_client *client,
data->type = id->driver_data;
data->last_chan = 0; /* force the first selection */
+ idle_disconnect_dt = of_node &&
+ of_property_read_bool(of_node, "i2c-mux-idle-disconnect");
+
/* Now create an adapter for each channel */
for (num = 0; num < chips[data->type].nchans; num++) {
force = 0; /* dynamic adap number */
class = 0; /* no class by default */
+ bool idle_disconnect_pd = false;
if (pdata) {
if (num < pdata->num_modes) {
/* force static number */
@@ -229,12 +237,13 @@ static int pca954x_probe(struct i2c_client *client,
} else
/* discard unconfigured channels */
break;
+ idle_disconnect_pd = pdata->modes[num].deselect_on_exit;
}
data->virt_adaps[num] =
i2c_add_mux_adapter(adap, &client->dev, client,
force, num, class, pca954x_select_chan,
- (pdata && pdata->modes[num].deselect_on_exit)
+ (idle_disconnect_pd || idle_disconnect_dt)
? pca954x_deselect_mux : NULL);
if (data->virt_adaps[num] == NULL) {
of: i2c: Add i2c-mux-idle-disconnect DT property to PCA954x mux driver Add i2c-mux-idle-disconnect device tree property to PCA954x mux driver. The new property forces the multiplexer to disconnect child buses in idle state. This is used, for example, when there are several multiplexers on the same bus and the devices on the underlying buses might have same I2C addresses. Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nsn.com> --- Changes in v3: - preserve legacy platform data deselect_on_exit flag - change property name to i2c-mux-idle-disconnect Changes in v2: - dropped idle-state binding - headers in alphabetical order - removed old platform data deselect_on_exit flag .../devicetree/bindings/i2c/i2c-mux-pca954x.txt | 3 +++ drivers/i2c/muxes/i2c-mux-pca954x.c | 11 ++++++++++- 2 files changed, 13 insertions(+), 1 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html