diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index faa8e6821fea..3c05de897566 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -152,6 +152,24 @@ config I2C_ISMT
 	  This driver can also be built as a module.  If so, the module will be
 	  called i2c-ismt.
 
+config I2C_IMC
+	tristate "Intel iMC (LGA 2011) SMBus Controller"
+	depends on PCI && X86
+	help
+	  If you say yes to this option, support will be included for the Intel
+	  Integrated Memory Controller SMBus host controller interface.  This
+	  controller is found on LGA 2011 Sandy Bridge Xeons and Core i7
+	  Extremes.
+
+	  There are currently no systems on which the kernel knows that it can
+	  safely enable this driver.  For now, you need to pass this driver a
+	  scary module parameter, and you should only pass that parameter if you
+	  have a special motherboard and know exactly what you are doing.
+	  Special motherboards include the Supermicro X9DRH-iF-NV.
+
+	  This driver can also be built as a module.  If so, the module will be
+	  called i2c-imc.
+
 config I2C_PIIX4
 	tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
 	depends on PCI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 37f2819b4560..ab3cdf1b3ca1 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_I2C_AMD8111)	+= i2c-amd8111.o
 obj-$(CONFIG_I2C_I801)		+= i2c-i801.o
 obj-$(CONFIG_I2C_ISCH)		+= i2c-isch.o
 obj-$(CONFIG_I2C_ISMT)		+= i2c-ismt.o
+obj-$(CONFIG_I2C_IMC)		+= i2c-imc.o
 obj-$(CONFIG_I2C_NFORCE2)	+= i2c-nforce2.o
 obj-$(CONFIG_I2C_NFORCE2_S4985)	+= i2c-nforce2-s4985.o
 obj-$(CONFIG_I2C_PIIX4)		+= i2c-piix4.o
diff --git a/drivers/i2c/busses/i2c-imc.c b/drivers/i2c/busses/i2c-imc.c
new file mode 100644
index 000000000000..ace93bb1adb2
--- /dev/null
+++ b/drivers/i2c/busses/i2c-imc.c
@@ -0,0 +1,567 @@
+/*
+ * Copyright (c) 2013-2016 Andrew Lutomirski <luto@amacapital.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/ratelimit.h>
+#include <linux/i2c.h>
+
+/*
+ * The datasheet can be found here, for example:
+ * http://www.intel.com/content/dam/www/public/us/en/documents/datasheets/xeon-e5-1600-2600-vol-2-datasheet.pdf
+ *
+ * There seem to be quite a few bugs or spec errors, though:
+ *
+ *  - A successful transaction sets WOD and RDO.
+ *
+ *  - The docs for TSOD_POLL_EN make no sense (see imc_channel_claim).
+ *
+ *  - Erratum BT109, which says:
+ *
+ *      The processor may not complete SMBus (System Management Bus)
+ *      transactions targeting the TSOD (Temperature Sensor On DIMM)
+ *      when Package C-States are enabled. Due to this erratum, if the
+ *      processor transitions into a Package C-State while an SMBus
+ *      transaction with the TSOD is in process, the processor will
+ *      suspend receipt of the transaction. The transaction completes
+ *      while the processor is in a Package C-State.  Upon exiting
+ *      Package C-State, the processor will attempt to resume the
+ *      SMBus transaction, detect a protocol violation, and log an
+ *      error.
+ *
+ *   The description notwithstanding, I've seen difficult-to-reproduce
+ *   issues when the system goes completely idle (so package C-states can
+ *   be entered) while software-initiated SMBUS transactions are in
+ *   progress.
+ */
+
+/* Register offsets (in PCI configuration space) */
+#define SMBSTAT(i)			(0x180 + 0x10*(i))
+#define SMBCMD(i)			(0x184 + 0x10*(i))
+#define SMBCNTL(i)			(0x188 + 0x10*(i))
+#define SMB_TSOD_POLL_RATE_CNTR(i)	(0x18C + 0x10*(i))
+#define SMB_TSOD_POLL_RATE		(0x1A8)
+
+/* SMBSTAT fields */
+#define SMBSTAT_RDO		(1U << 31)	/* Read Data Valid */
+#define SMBSTAT_WOD		(1U << 30)	/* Write Operation Done */
+#define SMBSTAT_SBE		(1U << 29)	/* SMBus Error */
+#define SMBSTAT_SMB_BUSY	(1U << 28)	/* SMBus Busy State */
+/* 26:24 is the last automatically polled TSOD address */
+#define SMBSTAT_RDATA_MASK	0xffff		/* result of a read */
+
+/* SMBCMD fields */
+#define SMBCMD_TRIGGER		(1U << 31)	/* CMD Trigger */
+#define SMBCMD_PNTR_SEL		(1U << 30)	/* HW polls TSOD with pointer */
+#define SMBCMD_WORD_ACCESS	(1U << 29)	/* word (vs byte) access */
+#define SMBCMD_TYPE_MASK	(3U << 27)	/* Mask for access type */
+#define  SMBCMD_TYPE_READ	(0U << 27)	/* Read */
+#define  SMBCMD_TYPE_WRITE	(1U << 27)	/* Write */
+#define  SMBCMD_TYPE_PNTR_WRITE	(3U << 27)	/* Write to pointer */
+#define SMBCMD_SA_MASK		(7U << 24)	/* Slave Address high bits */
+#define SMBCMD_SA_SHIFT		24
+#define SMBCMD_BA_MASK		0xff0000	/* Bus Txn address */
+#define SMBCMD_BA_SHIFT		16
+#define SMBCMD_WDATA_MASK	0xffff		/* data to write */
+
+/* SMBCNTL fields */
+#define SMBCNTL_DTI_MASK	0xf0000000	/* Slave Address low bits */
+#define SMBCNTL_DTI_SHIFT	28		/* Slave Address low bits */
+#define SMBCNTL_CKOVRD		(1U << 27)	/* # Clock Override */
+#define SMBCNTL_DIS_WRT		(1U << 26)	/* Disable Write (sadly) */
+#define SMBCNTL_SOFT_RST	(1U << 10)	/* Soft Reset */
+#define SMBCNTL_TSOD_POLL_EN	(1U << 8)	/* TSOD Polling Enable */
+/* Bits 0-3 and 4-6 indicate TSOD presence in various slots */
+
+/* Bits that might randomly change if we race with something. */
+#define SMBCMD_OUR_BITS		(~(u32)SMBCMD_TRIGGER)
+#define SMBCNTL_OUR_BITS	(SMBCNTL_DTI_MASK | SMBCNTL_TSOD_POLL_EN)
+
+/* System Address Controller, PCI dev 13 fn 6, 8086.3cf5 */
+#define SAD_CONTROL 0xf4
+
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_BR          0x3cf5  /* 13.6 */
+#define PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA      0x3ca8  /* 15.0 */
+
+static atomic_t imc_raced;  /* Set permanently to 1 if we screw up. */
+
+static bool allow_unsafe_access;
+
+struct imc_channel {
+	struct i2c_adapter adapter;
+	struct mutex mutex;  /* protects access to regs and prev_tsod_poll */
+	bool can_write, suspended;
+	bool prev_tsod_poll;
+};
+
+struct imc_priv {
+	struct pci_dev *pci_dev;
+	struct imc_channel channels[2];
+};
+
+static bool imc_wait_not_busy(struct imc_priv *priv, int chan, u32 *stat)
+{
+	/*
+	 * The clock is around 100kHz, and transactions are nine cycles
+	 * per byte plus a few start/stop cycles, plus whatever clock
+	 * streching is involved.  This means that polling every 70us
+	 * or so will give decent performance.
+	 *
+	 * Ideally we would calculate a good estimate for the
+	 * transaction time and sleep, but busy-waiting is an effective
+	 * workaround for an apparent Sandy Bridge bug that causes bogus
+	 * output if the system enters a package C-state.  (NB: these
+	 * states are systemwide -- we don't need be running on the
+	 * right package for this to work.)
+	 *
+	 * When Ivy Bridge and Haswell support are added, we could
+	 * consider making the busy-wait depend on the platform.
+	 */
+
+	int i;
+
+	for (i = 0; i < 50; i++) {
+		pci_read_config_dword(priv->pci_dev, SMBSTAT(chan), stat);
+		if (!(*stat & SMBSTAT_SMB_BUSY))
+			return true;
+		udelay(70);  /* see comment above -- we need to busy-wait */
+	}
+
+	return false;
+}
+
+static void imc_channel_release(struct imc_priv *priv, int chan)
+{
+	/* Return to HW control. */
+	if (priv->channels[chan].prev_tsod_poll) {
+		u32 cntl;
+
+		pci_read_config_dword(priv->pci_dev, SMBCNTL(chan), &cntl);
+		cntl |= SMBCNTL_TSOD_POLL_EN;
+		pci_write_config_dword(priv->pci_dev, SMBCNTL(chan), cntl);
+	}
+}
+
+static int imc_channel_claim(struct imc_priv *priv, int chan)
+{
+	/*
+	 * The docs are a bit confused here.  We're supposed to disable TSOD
+	 * polling, then wait for busy to be cleared, then set
+	 * SMBCNTL_TSOD_POLL_EN to zero to switch to software control.  But
+	 * SMBCNTL_TSOD_POLL_EN is the only documented way to turn off polling.
+	 */
+
+	u32 cntl, stat;
+
+	if (priv->channels[chan].suspended)
+		return -EIO;
+
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(chan), &cntl);
+	priv->channels[chan].prev_tsod_poll = !!(cntl & SMBCNTL_TSOD_POLL_EN);
+	cntl &= ~SMBCNTL_TSOD_POLL_EN;
+	pci_write_config_dword(priv->pci_dev, SMBCNTL(chan), cntl);
+
+	/* Sometimes the hardware won't let go. */
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(chan), &cntl);
+	if (cntl & SMBCNTL_TSOD_POLL_EN)
+		return -EBUSY;
+
+	if (!imc_wait_not_busy(priv, chan, &stat)) {
+		imc_channel_release(priv, chan);
+		return -EBUSY;  /* Someone else is controlling the bus. */
+	}
+
+	return 0;  /* The channel is ours. */
+}
+
+static bool imc_channel_can_claim(struct imc_priv *priv, int chan)
+{
+	u32 orig_cntl, cntl;
+
+	/* See if we can turn off TSOD_POLL_EN. */
+
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(chan), &orig_cntl);
+	pci_write_config_dword(priv->pci_dev, SMBCNTL(chan),
+			       orig_cntl & ~SMBCNTL_TSOD_POLL_EN);
+
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(chan), &cntl);
+	if (cntl & SMBCNTL_TSOD_POLL_EN)
+		return false;  /* Failed. */
+
+	pci_write_config_dword(priv->pci_dev, SMBCNTL(chan), orig_cntl);
+	return true;
+}
+
+/*
+ * The iMC supports five access types.  The terminology is rather
+ * inconsistent.  These are the types:
+ *
+ * "Write to pointer register SMBus": I2C_SMBUS_WRITE, I2C_SMBUS_BYTE
+ *
+ * Read byte/word: I2C_SMBUS_READ, I2C_SMBUS_{BYTE|WORD}_DATA
+ *
+ * Write byte/word: I2C_SMBUS_WRITE, I2C_SMBUS_{BYTE|WORD}_DATA
+ *
+ * The pointer write operations is AFAICT completely useless for
+ * software control, for two reasons.  First, HW periodically polls any
+ * TSODs on the bus, so it will corrupt the pointer in between SW
+ * transactions.  More importantly, the matching "read byte"/"receive
+ * byte" (the address-less single-byte read) is not available for SW
+ * control.  Therefore, this driver doesn't implement pointer writes
+ *
+ * There is no PEC support.
+ */
+
+static u32 imc_func(struct i2c_adapter *adapter)
+{
+	int chan;
+	struct imc_channel *ch;
+	struct imc_priv *priv = i2c_get_adapdata(adapter);
+
+	chan = (adapter == &priv->channels[0].adapter ? 0 : 1);
+	ch = &priv->channels[chan];
+
+	if (ch->can_write)
+		return I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
+	else
+		return I2C_FUNC_SMBUS_READ_BYTE_DATA |
+			I2C_FUNC_SMBUS_READ_WORD_DATA;
+}
+
+static s32 imc_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			  unsigned short flags, char read_write, u8 command,
+			  int size, union i2c_smbus_data *data)
+{
+	int ret, chan;
+	u32 cmd = 0, cntl, final_cmd, final_cntl, stat;
+	struct imc_channel *ch;
+	struct imc_priv *priv = i2c_get_adapdata(adap);
+
+	if (atomic_read(&imc_raced))
+		return -EIO;  /* Minimize damage. */
+
+	chan = (adap == &priv->channels[0].adapter ? 0 : 1);
+	ch = &priv->channels[chan];
+
+	/* Encode CMD part of addresses and access size */
+	cmd |= ((u32)addr & 0x7) << SMBCMD_SA_SHIFT;
+	cmd |= ((u32)command) << SMBCMD_BA_SHIFT;
+	if (size == I2C_SMBUS_WORD_DATA)
+		cmd |= SMBCMD_WORD_ACCESS;
+
+	/* Encode read/write and data to write */
+	if (read_write == I2C_SMBUS_READ) {
+		cmd |= SMBCMD_TYPE_READ;
+	} else {
+		cmd |= SMBCMD_TYPE_WRITE;
+		cmd |= (size == I2C_SMBUS_WORD_DATA
+			    ? swab16(data->word)
+			    : data->byte);
+	}
+
+	mutex_lock(&ch->mutex);
+
+	ret = imc_channel_claim(priv, chan);
+	if (ret)
+		goto out_unlock;
+
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(chan), &cntl);
+	cntl &= ~SMBCNTL_DTI_MASK;
+	cntl |= ((u32)addr >> 3) << SMBCNTL_DTI_SHIFT;
+	pci_write_config_dword(priv->pci_dev, SMBCNTL(chan), cntl);
+
+	/*
+	 * This clears SMBCMD_PNTR_SEL.  We leave it cleared so that we don't
+	 * need to think about keeping the TSOD pointer state consistent with
+	 * the hardware's expectation.  This probably has some miniscule
+	 * power cost, as TSOD polls will take 9 extra cycles.
+	 */
+	cmd |= SMBCMD_TRIGGER;
+	pci_write_config_dword(priv->pci_dev, SMBCMD(chan), cmd);
+
+	if (!imc_wait_not_busy(priv, chan, &stat)) {
+		/* Timeout.  TODO: Reset the controller? */
+		ret = -ETIMEDOUT;
+		dev_dbg(&priv->pci_dev->dev, "controller is wedged\n");
+		goto out_release;
+	}
+
+	/*
+	 * Be paranoid: try to detect races.  This will only detect races
+	 * against BIOS, not against hardware.  (I've never seen this happen.)
+	 */
+	pci_read_config_dword(priv->pci_dev, SMBCMD(chan), &final_cmd);
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(chan), &final_cntl);
+	if (((cmd ^ final_cmd) & SMBCMD_OUR_BITS) ||
+	    ((cntl ^ final_cntl) & SMBCNTL_OUR_BITS)) {
+		WARN(1, "iMC SMBUS raced against firmware");
+		dev_err(&priv->pci_dev->dev,
+			"Access to channel %d raced: cmd 0x%08X->0x%08X, cntl 0x%08X->0x%08X\n",
+			chan, cmd, final_cmd, cntl, final_cntl);
+		atomic_set(&imc_raced, 1);
+		ret = -EIO;
+		goto out_release;
+	}
+
+	if (stat & SMBSTAT_SBE) {
+		/*
+		 * Clear the error to re-enable TSOD polling.  The docs say
+		 * that, as long as SBE is set, TSOD polling won't happen.
+		 * The docs also say that writing zero to this bit (which is
+		 * the only writable bit in the whole register) will clear
+		 * the error.  Empirically, writing 0 does not clear SBE, but
+		 * it's probably still good to do the write in compliance with
+		 * the spec.  (TSOD polling still happens and seems to
+		 * clear SBE on its own.)
+		 */
+		pci_write_config_dword(priv->pci_dev, SMBSTAT(chan), 0);
+		ret = -ENXIO;
+		goto out_release;
+	}
+
+	if (read_write == I2C_SMBUS_READ) {
+		if (!(stat & SMBSTAT_RDO)) {
+			dev_dbg(&priv->pci_dev->dev,
+				"Unexpected read status 0x%08X\n", stat);
+			ret = -EIO;
+			goto out_release;
+		}
+
+		/*
+		 * The iMC SMBUS controller thinks of SMBUS words as
+		 * being big-endian (MSB first).  Linux treats them as
+		 * little-endian, so we need to swap them.
+		 *
+		 * Note: the controller will often (always?) set WOD
+		 * here.  This is probably a hardware bug.
+		 */
+		if (size == I2C_SMBUS_WORD_DATA)
+			data->word = swab16(stat & SMBSTAT_RDATA_MASK);
+		else
+			data->byte = stat & 0xFF;
+	} else {
+		/*
+		 * Note: the controller will often (always?) set RDO here.
+		 * This is probably a hardware bug.
+		 */
+		if (!(stat & SMBSTAT_WOD)) {
+			dev_dbg(&priv->pci_dev->dev,
+				"Unexpected write status 0x%08X\n", stat);
+			ret = -EIO;
+		}
+	}
+
+out_release:
+	imc_channel_release(priv, chan);
+
+out_unlock:
+	mutex_unlock(&ch->mutex);
+
+	return ret;
+}
+
+static const struct i2c_algorithm imc_smbus_algorithm = {
+	.smbus_xfer	= imc_smbus_xfer,
+	.functionality	= imc_func,
+};
+
+static int imc_init_channel(struct imc_priv *priv, int i, int socket)
+{
+	int err;
+	u32 val;
+	struct imc_channel *ch = &priv->channels[i];
+
+	/*
+	 * With CLTT enabled, the hardware won't let us turn
+	 * off TSOD polling.  The device is completely useless
+	 * when this happens (at least without help from Intel),
+	 * but we can at least minimize confusion.
+	 */
+	if (!imc_channel_can_claim(priv, i)) {
+		dev_warn(&priv->pci_dev->dev,
+			 "iMC channel %d: we cannot control the HW.  Is CLTT on?\n",
+			 i);
+		return -EBUSY;
+	}
+
+	i2c_set_adapdata(&ch->adapter, priv);
+	ch->adapter.owner = THIS_MODULE;
+	ch->adapter.algo = &imc_smbus_algorithm;
+	ch->adapter.dev.parent = &priv->pci_dev->dev;
+
+	pci_read_config_dword(priv->pci_dev, SMBCNTL(i), &val);
+	ch->can_write = !(val & SMBCNTL_DIS_WRT);
+
+	mutex_init(&ch->mutex);
+
+	snprintf(ch->adapter.name, sizeof(ch->adapter.name),
+		 "iMC socket %d channel %d", socket, i);
+	err = i2c_add_adapter(&ch->adapter);
+	if (err) {
+		mutex_destroy(&ch->mutex);
+		return err;
+	}
+
+	return 0;
+}
+
+static void imc_free_channel(struct imc_priv *priv, int i)
+{
+	struct imc_channel *ch = &priv->channels[i];
+
+	i2c_del_adapter(&ch->adapter);
+	mutex_destroy(&ch->mutex);
+}
+
+static struct pci_dev *imc_get_related_device(struct pci_bus *bus,
+					      unsigned int devfn, u16 devid)
+{
+	struct pci_dev *dev = pci_get_slot(bus, devfn);
+
+	if (!dev)
+		return NULL;
+	if (dev->vendor != PCI_VENDOR_ID_INTEL || dev->device != devid) {
+		pci_dev_put(dev);
+		return NULL;
+	}
+	return dev;
+}
+
+static int imc_probe(struct pci_dev *dev, const struct pci_device_id *id)
+{
+	int i, j, err;
+	struct imc_priv *priv;
+	struct pci_dev *sad;  /* System Address Decoder */
+	u32 sad_control;
+
+	/* Paranoia: the datasheet says this is always at 15.0 */
+	if (dev->devfn != PCI_DEVFN(15, 0))
+		return -ENODEV;
+
+	/*
+	 * The socket number is hidden away on a different PCI device.
+	 * There's another copy at devfn 11.0 offset 0x40, and an even
+	 * less convincing copy at 5.0 0x140.  The actual APICID register
+	 * is "not used ... and is still implemented in hardware because
+	 * of FUD".
+	 *
+	 * In principle we could double-check that the socket matches
+	 * the numa_node from SRAT, but this is probably not worth it.
+	 */
+	sad = imc_get_related_device(dev->bus, PCI_DEVFN(13, 6),
+				     PCI_DEVICE_ID_INTEL_SBRIDGE_BR);
+	if (!sad)
+		return -ENODEV;
+	pci_read_config_dword(sad, SAD_CONTROL, &sad_control);
+	pci_dev_put(sad);
+
+	priv = devm_kzalloc(&dev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+	priv->pci_dev = dev;
+
+	pci_set_drvdata(dev, priv);
+
+	for (i = 0; i < 2; i++) {
+		err = imc_init_channel(priv, i, sad_control & 0x7);
+		if (err)
+			goto exit_free_channels;
+	}
+
+	return 0;
+
+exit_free_channels:
+	for (j = 0; j < i; j++)
+		imc_free_channel(priv, j);
+	return err;
+}
+
+static void imc_remove(struct pci_dev *dev)
+{
+	int i;
+	struct imc_priv *priv = pci_get_drvdata(dev);
+
+	for (i = 0; i < 2; i++)
+		imc_free_channel(priv, i);
+}
+
+static int imc_suspend(struct pci_dev *dev, pm_message_t mesg)
+{
+	int i;
+	struct imc_priv *priv = pci_get_drvdata(dev);
+
+	/* BIOS is in charge.  We should finish any pending transaction */
+	for (i = 0; i < 2; i++) {
+		mutex_lock(&priv->channels[i].mutex);
+		priv->channels[i].suspended = true;
+		mutex_unlock(&priv->channels[i].mutex);
+	}
+
+	return 0;
+}
+
+static int imc_resume(struct pci_dev *dev)
+{
+	int i;
+	struct imc_priv *priv = pci_get_drvdata(dev);
+
+	for (i = 0; i < 2; i++) {
+		mutex_lock(&priv->channels[i].mutex);
+		priv->channels[i].suspended = false;
+		mutex_unlock(&priv->channels[i].mutex);
+	}
+
+	return 0;
+}
+
+static const struct pci_device_id imc_ids[] = {
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SBRIDGE_IMC_TA) },
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, imc_ids);
+
+static struct pci_driver imc_pci_driver = {
+	.name		= "imc_smbus",
+	.id_table	= imc_ids,
+	.probe		= imc_probe,
+	.remove		= imc_remove,
+	.suspend	= imc_suspend,
+	.resume		= imc_resume,
+};
+
+static int __init i2c_imc_init(void)
+{
+	if (!allow_unsafe_access)
+		return -ENODEV;
+
+	pr_warn("using this driver is dangerous unless your firmware is specifically designed for it; use at your own risk\n");
+	return pci_register_driver(&imc_pci_driver);
+}
+module_init(i2c_imc_init);
+
+static void __exit i2c_imc_exit(void)
+{
+	pci_unregister_driver(&imc_pci_driver);
+}
+module_exit(i2c_imc_exit);
+
+module_param(allow_unsafe_access, bool, 0400);
+MODULE_PARM_DESC(allow_unsafe_access, "enable i2c_imc despite potential races against BIOS/hardware bus access");
+
+MODULE_AUTHOR("Andrew Lutomirski <luto@amacapital.net>");
+MODULE_DESCRIPTION("iMC SMBus driver");
+MODULE_LICENSE("GPL v2");
