diff mbox series

[v3,39/40] ARM: dts: aspeed: P10 and tacoma: Set FSI clock frequency

Message ID 20240516181907.3468796-40-eajames@linux.ibm.com
State Not Applicable
Headers show
Series fsi: Add interrupt support | expand

Commit Message

Eddie James May 16, 2024, 6:19 p.m. UTC
Now that the driver doesn't hardcode the clock divider, set it
in the device tree.

Signed-off-by: Eddie James <eajames@linux.ibm.com>
---
 arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts | 1 +
 arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi     | 1 +
 2 files changed, 2 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
index 213023bc5aec4..96a8f727bc389 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-tacoma.dts
@@ -193,6 +193,7 @@  &fsim0 {
 	#address-cells = <2>;
 	#size-cells = <0>;
 
+	clock-frequency = <100000000>;
 	fsi-routing-gpios = <&gpio0 ASPEED_GPIO(Q, 7) GPIO_ACTIVE_HIGH>;
 	fsi-mux-gpios = <&gpio0 ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
 
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index 07ce3b2bc62a3..44e48e39e6e96 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -8,6 +8,7 @@  &fsim0 {
 	#size-cells = <0>;
 
 	cfam-reset-gpios = <&gpio0 ASPEED_GPIO(Q, 0) GPIO_ACTIVE_HIGH>;
+	clock-frequency = <100000000>;
 
 	cfam@0,0 {
 		reg = <0 0>;