diff mbox series

[v3] i2c: imx: when being a target, mark the last read as processed

Message ID 20240221193013.14233-2-wsa+renesas@sang-engineering.com
State Accepted
Headers show
Series [v3] i2c: imx: when being a target, mark the last read as processed | expand

Commit Message

Wolfram Sang Feb. 21, 2024, 7:27 p.m. UTC 
From: Corey Minyard <minyard@acm.org>

When being a target, NAK from the controller means that all bytes have
been transferred. So, the last byte needs also to be marked as
'processed'. Otherwise index registers of backends may not increase.

Signed-off-by: Corey Minyard <minyard@acm.org>
Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
[wsa: fixed comment and commit message to properly describe the case]
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---

Changes since v2:
* updated commit message and comment

In the stalled discussion[1], it seems I couldn't make my suggestions
clear. So, here are the changes how I meant them. I hope this can be
agreed on.

[1] http://patchwork.ozlabs.org/project/linux-i2c/patch/20211112133956.655179-3-minyard@acm.org/

 drivers/i2c/busses/i2c-imx.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Andi Shyti Feb. 21, 2024, 8:58 p.m. UTC | #1 
Hi Wolfram and Corey,

On Wed, Feb 21, 2024 at 08:27:13PM +0100, Wolfram Sang wrote:
> From: Corey Minyard <minyard@acm.org>
> 
> When being a target, NAK from the controller means that all bytes have
> been transferred. So, the last byte needs also to be marked as
> 'processed'. Otherwise index registers of backends may not increase.
> 
> Signed-off-by: Corey Minyard <minyard@acm.org>
> Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
> Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
> Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
> [wsa: fixed comment and commit message to properly describe the case]
> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>

is this a fix?

Andi

> ---
> 
> Changes since v2:
> * updated commit message and comment
> 
> In the stalled discussion[1], it seems I couldn't make my suggestions
> clear. So, here are the changes how I meant them. I hope this can be
> agreed on.
> 
> [1] http://patchwork.ozlabs.org/project/linux-i2c/patch/20211112133956.655179-3-minyard@acm.org/
> 
>  drivers/i2c/busses/i2c-imx.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
> index 88a053987403..60e813137f84 100644
> --- a/drivers/i2c/busses/i2c-imx.c
> +++ b/drivers/i2c/busses/i2c-imx.c
> @@ -803,6 +803,11 @@ static irqreturn_t i2c_imx_slave_handle(struct imx_i2c_struct *i2c_imx,
>  		ctl &= ~I2CR_MTX;
>  		imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
>  		imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
> +
> +		/* flag the last byte as processed */
> +		i2c_imx_slave_event(i2c_imx,
> +				    I2C_SLAVE_READ_PROCESSED, &value);
> +
>  		i2c_imx_slave_finish_op(i2c_imx);
>  		return IRQ_HANDLED;
>  	}
> -- 
> 2.43.0
>
Wolfram Sang Feb. 21, 2024, 10:54 p.m. UTC | #2 
On Wed, Feb 21, 2024 at 09:58:23PM +0100, Andi Shyti wrote:
> Hi Wolfram and Corey,
> 
> On Wed, Feb 21, 2024 at 08:27:13PM +0100, Wolfram Sang wrote:
> > From: Corey Minyard <minyard@acm.org>
> > 
> > When being a target, NAK from the controller means that all bytes have
> > been transferred. So, the last byte needs also to be marked as
> > 'processed'. Otherwise index registers of backends may not increase.
> > 
> > Signed-off-by: Corey Minyard <minyard@acm.org>
> > Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
> > Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
> > Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > [wsa: fixed comment and commit message to properly describe the case]
> > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> 
> is this a fix?

In deed, it is:

Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")
Oleksij Rempel Feb. 22, 2024, 7:56 a.m. UTC | #3 
Hi Wolfram,

On Wed, Feb 21, 2024 at 11:54:54PM +0100, Wolfram Sang wrote:
> On Wed, Feb 21, 2024 at 09:58:23PM +0100, Andi Shyti wrote:
> > Hi Wolfram and Corey,
> > 
> > On Wed, Feb 21, 2024 at 08:27:13PM +0100, Wolfram Sang wrote:
> > > From: Corey Minyard <minyard@acm.org>
> > > 
> > > When being a target, NAK from the controller means that all bytes have
> > > been transferred. So, the last byte needs also to be marked as
> > > 'processed'. Otherwise index registers of backends may not increase.
> > > 
> > > Signed-off-by: Corey Minyard <minyard@acm.org>
> > > Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
> > > Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
> > > Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > > [wsa: fixed comment and commit message to properly describe the case]
> > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> > 
> > is this a fix?
> 
> In deed, it is:
> 
> Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")

Looks good :)
Are any action needed on my side?

Regards,
Oleksij
Wolfram Sang Feb. 22, 2024, 8:05 a.m. UTC | #4 
On Thu, Feb 22, 2024 at 08:56:00AM +0100, Oleksij Rempel wrote:

> > > > When being a target, NAK from the controller means that all bytes have
> > > > been transferred. So, the last byte needs also to be marked as
> > > > 'processed'. Otherwise index registers of backends may not increase.
> > > > 
> > > > Signed-off-by: Corey Minyard <minyard@acm.org>
> > > > Tested-by: Andrew Manley <andrew.manley@sealingtech.com>
> > > > Reviewed-by: Andrew Manley <andrew.manley@sealingtech.com>
> > > > Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
> > > > [wsa: fixed comment and commit message to properly describe the case]
> > > > Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
> > > 
> > > is this a fix?
> > 
> > In deed, it is:
> > 
> > Fixes: f7414cd6923f ("i2c: imx: support slave mode for imx I2C driver")
> 
> Looks good :)
> Are any action needed on my side?

Nope. All tags are still valid, I'd say, because I didn't change any code.

Thanks!
Andi Shyti Feb. 22, 2024, 8:47 a.m. UTC | #5 
Hi

On Wed, 21 Feb 2024 20:27:13 +0100, Wolfram Sang wrote:
> When being a target, NAK from the controller means that all bytes have
> been transferred. So, the last byte needs also to be marked as
> 'processed'. Otherwise index registers of backends may not increase.
> 
> 

Applied to i2c/i2c-host-fixes on

git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git

Thank you,
Andi

Patches applied
===============
[1/1] i2c: imx: when being a target, mark the last read as processed
      commit: cf8281b1aeab93a03c87033a741075c39ace80d4
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 88a053987403..60e813137f84 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -803,6 +803,11 @@  static irqreturn_t i2c_imx_slave_handle(struct imx_i2c_struct *i2c_imx,
 		ctl &= ~I2CR_MTX;
 		imx_i2c_write_reg(ctl, i2c_imx, IMX_I2C_I2CR);
 		imx_i2c_read_reg(i2c_imx, IMX_I2C_I2DR);
+
+		/* flag the last byte as processed */
+		i2c_imx_slave_event(i2c_imx,
+				    I2C_SLAVE_READ_PROCESSED, &value);
+
 		i2c_imx_slave_finish_op(i2c_imx);
 		return IRQ_HANDLED;
 	}