diff mbox series

[v2,3/3] i2c: imx-lpi2c: add debug message when i2c peripheral clk doesn't work

Message ID 20230724105546.1964059-3-carlos.song@nxp.com
State Changes Requested
Headers show
Series [v2,1/3] i2c: imx-lpi2c: directly return ISR when detect a NACK | expand

Commit Message

Carlos Song July 24, 2023, 10:55 a.m. UTC
From: Gao Pan <pandy.gao@nxp.com>

Output error log when i2c peripheral clk rate is 0, then
directly return -EINVAL.

Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
Signed-off-by: Gao Pan <pandy.gao@nxp.com>
Signed-off-by: Carlos Song <carlos.song@nxp.com>
---
 drivers/i2c/busses/i2c-imx-lpi2c.c | 5 +++++
 1 file changed, 5 insertions(+)

Comments

Fabio Estevam July 24, 2023, 12:38 p.m. UTC | #1
On Mon, Jul 24, 2023 at 7:52 AM <carlos.song@nxp.com> wrote:
>
> From: Gao Pan <pandy.gao@nxp.com>
>
> Output error log when i2c peripheral clk rate is 0, then
> directly return -EINVAL.
>
> Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
> Signed-off-by: Gao Pan <pandy.gao@nxp.com>
> Signed-off-by: Carlos Song <carlos.song@nxp.com>
> ---
>  drivers/i2c/busses/i2c-imx-lpi2c.c | 5 +++++
>  1 file changed, 5 insertions(+)
>
> diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
> index e93ff3b5373c..12b4f2a89343 100644
> --- a/drivers/i2c/busses/i2c-imx-lpi2c.c
> +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
> @@ -214,6 +214,11 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
>         lpi2c_imx_set_mode(lpi2c_imx);
>
>         clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
> +       if (!clk_rate) {
> +               dev_err(&lpi2c_imx->adapter.dev, "clk_per rate is 0\n");

The subject says 'debug message', but this is an error message.

Please adjust the Subject.
Carlos Song July 25, 2023, 1:59 a.m. UTC | #2
Thanks! I will adjust it and send V3 patch.

> -----Original Message-----
> From: Fabio Estevam <festevam@gmail.com>
> Sent: Monday, July 24, 2023 8:38 PM
> To: Carlos Song <carlos.song@nxp.com>
> Cc: andi.shyti@kernel.org; Aisheng Dong <aisheng.dong@nxp.com>;
> shawnguo@kernel.org; s.hauer@pengutronix.de; kernel@pengutronix.de;
> Clark Wang <xiaoning.wang@nxp.com>; Bough Chen <haibo.chen@nxp.com>;
> dl-linux-imx <linux-imx@nxp.com>; linux-i2c@vger.kernel.org;
> linux-arm-kernel@lists.infradead.org; linux-kernel@vger.kernel.org
> Subject: [EXT] Re: [PATCH v2 3/3] i2c: imx-lpi2c: add debug message when i2c
> peripheral clk doesn't work
> 
> Caution: This is an external email. Please take care when clicking links or
> opening attachments. When in doubt, report the message using the 'Report this
> email' button
> 
> 
> On Mon, Jul 24, 2023 at 7:52 AM <carlos.song@nxp.com> wrote:
> >
> > From: Gao Pan <pandy.gao@nxp.com>
> >
> > Output error log when i2c peripheral clk rate is 0, then directly
> > return -EINVAL.
> >
> > Fixes: a55fa9d0e42e ("i2c: imx-lpi2c: add low power i2c bus driver")
> > Signed-off-by: Gao Pan <pandy.gao@nxp.com>
> > Signed-off-by: Carlos Song <carlos.song@nxp.com>
> > ---
> >  drivers/i2c/busses/i2c-imx-lpi2c.c | 5 +++++
> >  1 file changed, 5 insertions(+)
> >
> > diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c
> > b/drivers/i2c/busses/i2c-imx-lpi2c.c
> > index e93ff3b5373c..12b4f2a89343 100644
> > --- a/drivers/i2c/busses/i2c-imx-lpi2c.c
> > +++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
> > @@ -214,6 +214,11 @@ static int lpi2c_imx_config(struct lpi2c_imx_struct
> *lpi2c_imx)
> >         lpi2c_imx_set_mode(lpi2c_imx);
> >
> >         clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
> > +       if (!clk_rate) {
> > +               dev_err(&lpi2c_imx->adapter.dev, "clk_per rate is
> > + 0\n");
> 
> The subject says 'debug message', but this is an error message.
> 
> Please adjust the Subject.
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-imx-lpi2c.c b/drivers/i2c/busses/i2c-imx-lpi2c.c
index e93ff3b5373c..12b4f2a89343 100644
--- a/drivers/i2c/busses/i2c-imx-lpi2c.c
+++ b/drivers/i2c/busses/i2c-imx-lpi2c.c
@@ -214,6 +214,11 @@  static int lpi2c_imx_config(struct lpi2c_imx_struct *lpi2c_imx)
 	lpi2c_imx_set_mode(lpi2c_imx);
 
 	clk_rate = clk_get_rate(lpi2c_imx->clks[0].clk);
+	if (!clk_rate) {
+		dev_err(&lpi2c_imx->adapter.dev, "clk_per rate is 0\n");
+		return -EINVAL;
+	}
+
 	if (lpi2c_imx->mode == HS || lpi2c_imx->mode == ULTRA_FAST)
 		filt = 0;
 	else