diff mbox series

[5/5] arm64: dts: qcom: sm8250: Add interconnects and power-domains to QUPs

Message ID 20230703-topic-8250_qup_icc-v1-5-fea39aa07525@linaro.org
State Not Applicable
Headers show
Series Add interconnects to QUPs on SM8250 | expand

Commit Message

Konrad Dybcio July 3, 2023, 1:31 p.m. UTC
Describe the interconnect paths related to QUPs and add the power-domains
powering them.

This is required for icc sync_state, as otherwise QUP access is gated.

Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
---
 arch/arm64/boot/dts/qcom/sm8250.dtsi | 150 +++++++++++++++++++++++++++++++++++
 1 file changed, 150 insertions(+)

Comments

Dmitry Baryshkov July 3, 2023, 2:25 p.m. UTC | #1
On 03/07/2023 16:31, Konrad Dybcio wrote:
> Describe the interconnect paths related to QUPs and add the power-domains
> powering them.
> 
> This is required for icc sync_state, as otherwise QUP access is gated.
> 
> Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
> ---
>   arch/arm64/boot/dts/qcom/sm8250.dtsi | 150 +++++++++++++++++++++++++++++++++++
>   1 file changed, 150 insertions(+)

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index 1efa07f2caff..35111fce898a 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1022,6 +1022,10 @@  i2c14: i2c@880000 {
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1038,6 +1042,9 @@  spi14: spi@880000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1054,6 +1061,10 @@  i2c15: i2c@884000 {
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1070,6 +1081,9 @@  spi15: spi@884000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1086,6 +1100,10 @@  i2c16: i2c@888000 {
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1102,6 +1120,9 @@  spi16: spi@888000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1118,6 +1139,10 @@  i2c17: i2c@88c000 {
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1134,6 +1159,9 @@  spi17: spi@88c000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1149,6 +1177,8 @@  uart17: serial@88c000 {
 				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-config";
 				status = "disabled";
 			};
 
@@ -1163,6 +1193,10 @@  i2c18: i2c@890000 {
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1179,6 +1213,9 @@  spi18: spi@890000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1194,6 +1231,8 @@  uart18: serial@890000 {
 				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>;
+				interconnect-names = "qup-config";
 				status = "disabled";
 			};
 
@@ -1208,6 +1247,10 @@  i2c19: i2c@894000 {
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1224,6 +1267,9 @@  spi19: spi@894000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
+						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1276,6 +1322,10 @@  i2c0: i2c@980000 {
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1292,6 +1342,9 @@  spi0: spi@980000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1308,6 +1361,10 @@  i2c1: i2c@984000 {
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1324,6 +1381,9 @@  spi1: spi@984000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1340,6 +1400,10 @@  i2c2: i2c@988000 {
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1356,6 +1420,9 @@  spi2: spi@988000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1371,6 +1438,8 @@  uart2: serial@988000 {
 				interrupts = <GIC_SPI 603 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-config";
 				status = "disabled";
 			};
 
@@ -1385,6 +1454,10 @@  i2c3: i2c@98c000 {
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1401,6 +1474,9 @@  spi3: spi@98c000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1417,6 +1493,10 @@  i2c4: i2c@990000 {
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1433,6 +1513,9 @@  spi4: spi@990000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1449,6 +1532,10 @@  i2c5: i2c@994000 {
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1465,6 +1552,9 @@  spi5: spi@994000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1481,6 +1571,10 @@  i2c6: i2c@998000 {
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1497,6 +1591,9 @@  spi6: spi@998000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1512,6 +1609,8 @@  uart6: serial@998000 {
 				interrupts = <GIC_SPI 607 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-config";
 				status = "disabled";
 			};
 
@@ -1526,6 +1625,10 @@  i2c7: i2c@99c000 {
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1542,6 +1645,9 @@  spi7: spi@99c000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1591,6 +1697,10 @@  i2c8: i2c@a80000 {
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1607,6 +1717,9 @@  spi8: spi@a80000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1623,6 +1736,10 @@  i2c9: i2c@a84000 {
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1639,6 +1756,9 @@  spi9: spi@a84000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1655,6 +1775,10 @@  i2c10: i2c@a88000 {
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1671,6 +1795,9 @@  spi10: spi@a88000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1687,6 +1814,10 @@  i2c11: i2c@a8c000 {
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1703,6 +1834,9 @@  spi11: spi@a8c000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1719,6 +1853,10 @@  i2c12: i2c@a90000 {
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1735,6 +1873,9 @@  spi12: spi@a90000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1750,6 +1891,8 @@  uart12: serial@a90000 {
 				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>;
+				interconnect-names = "qup-config";
 				status = "disabled";
 			};
 
@@ -1764,6 +1907,10 @@  i2c13: i2c@a94000 {
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
+				power-domains = <&rpmhpd SM8250_CX>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";
@@ -1780,6 +1927,9 @@  spi13: spi@a94000 {
 				dma-names = "tx", "rx";
 				power-domains = <&rpmhpd SM8250_CX>;
 				operating-points-v2 = <&qup_opp_table>;
+				interconnects = <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
+						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
+				interconnect-names = "qup-config", "qup-memory";
 				#address-cells = <1>;
 				#size-cells = <0>;
 				status = "disabled";