diff mbox series

[v3,2/6] dt-bindings: i2c: qcom-geni: document I2C Master Hub serial I2C engine

Message ID 20221114-narmstrong-sm8550-upstream-i2c-master-hub-v3-2-f6a20dc9996e@linaro.org
State Accepted
Headers show
Series soc: qcom: add support for the I2C Master Hub | expand

Commit Message

Neil Armstrong Nov. 29, 2022, 2:47 p.m. UTC 
The I2C Master Hub is a stripped down version of the GENI Serial Engine
QUP Wrapper Controller but only supporting I2C serial engines without
DMA support.

Document the I2C Serial Engine variant used within the I2C Master
Hub Wrapper.

This serial engine variant lacks DMA support, requires a core clock,
and since DMA support is lacking the memory interconnect path isn't
needed.

Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../bindings/i2c/qcom,i2c-geni-qcom.yaml           | 64 ++++++++++++++++++----
 1 file changed, 54 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
index 0e7ed00562e2..f5f7dc8f325c 100644
--- a/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
+++ b/Documentation/devicetree/bindings/i2c/qcom,i2c-geni-qcom.yaml
@@ -10,18 +10,19 @@  maintainers:
   - Andy Gross <agross@kernel.org>
   - Bjorn Andersson <bjorn.andersson@linaro.org>
 
-allOf:
-  - $ref: /schemas/i2c/i2c-controller.yaml#
-
 properties:
   compatible:
-    const: qcom,geni-i2c
+    enum:
+      - qcom,geni-i2c
+      - qcom,geni-i2c-master-hub
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
 
   clock-names:
-    const: se
+    minItems: 1
+    maxItems: 2
 
   clock-frequency:
     default: 100000
@@ -35,13 +36,12 @@  properties:
       - const: rx
 
   interconnects:
+    minItems: 2
     maxItems: 3
 
   interconnect-names:
-    items:
-      - const: qup-core
-      - const: qup-config
-      - const: qup-memory
+    minItems: 2
+    maxItems: 3
 
   interrupts:
     maxItems: 1
@@ -71,6 +71,50 @@  required:
   - clock-names
   - reg
 
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: qcom,geni-i2c-master-hub
+    then:
+      properties:
+        clocks:
+          minItems: 2
+
+        clock-names:
+          items:
+            - const: se
+            - const: core
+
+        dmas: false
+        dma-names: false
+
+        interconnects:
+          maxItems: 2
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+    else:
+      properties:
+        clocks:
+          maxItems: 1
+
+        clock-names:
+          const: se
+
+        interconnects:
+          minItems: 3
+
+        interconnect-names:
+          items:
+            - const: qup-core
+            - const: qup-config
+            - const: qup-memory
+
 unevaluatedProperties: false
 
 examples: