diff mbox series

[2/5] arm64: dts: qcom: sdm845-db845c: drop gpios from CCI I2C sensors

Message ID 20220802153947.44457-3-krzysztof.kozlowski@linaro.org
State Not Applicable
Headers show
Series i2c/arm: dt-bindings: qcom: qcom,i2c-cci: convert to dtschema | expand

Commit Message

Krzysztof Kozlowski Aug. 2, 2022, 3:39 p.m. UTC 
The OV7251 and OV8856 camera sensor bindings do not allow
property "gpios" and Linux driver does not parse it.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Not tested on hardware.
---
 arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ----
 1 file changed, 4 deletions(-)

Comments

Robert Foss Aug. 29, 2022, 2:26 p.m. UTC | #1 
On Tue, 2 Aug 2022 at 17:40, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> The OV7251 and OV8856 camera sensor bindings do not allow
> property "gpios" and Linux driver does not parse it.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Not tested on hardware.
> ---
>  arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 4 ----
>  1 file changed, 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index b9304f81290a..f313f6964810 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -1214,8 +1214,6 @@ camera@10 {
>                 reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&cam0_default>;
> -               gpios = <&tlmm 13 0>,
> -                       <&tlmm 9 GPIO_ACTIVE_LOW>;
>
>                 clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
>                 clock-names = "xvclk";
> @@ -1256,8 +1254,6 @@ camera@60 {
>                 enable-gpios = <&tlmm 21 0>;
>                 pinctrl-names = "default";
>                 pinctrl-0 = <&cam3_default>;
> -               gpios = <&tlmm 16 0>,
> -                       <&tlmm 21 0>;
>
>                 clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
>                 clock-names = "xclk";
> --
> 2.34.1

Reviewed-by: Robert Foss <robert.foss@linaro.org>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index b9304f81290a..f313f6964810 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -1214,8 +1214,6 @@  camera@10 {
 		reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam0_default>;
-		gpios = <&tlmm 13 0>,
-			<&tlmm 9 GPIO_ACTIVE_LOW>;
 
 		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
 		clock-names = "xvclk";
@@ -1256,8 +1254,6 @@  camera@60 {
 		enable-gpios = <&tlmm 21 0>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cam3_default>;
-		gpios = <&tlmm 16 0>,
-			<&tlmm 21 0>;
 
 		clocks = <&clock_camcc CAM_CC_MCLK3_CLK>;
 		clock-names = "xclk";