diff mbox series

[v5,15/20] i2c: i2c-core-of: Fix corner case of finding adapter by node

Message ID 20210423095743.v5.15.Ib7e3a4af2f3e2cb3bd8e4adbac3bcfc966f27791@changeid
State Superseded
Headers show
Series drm: Fix EDID reading on ti-sn65dsi86; solve some chicken-and-egg problems | expand

Commit Message

Doug Anderson April 23, 2021, 4:59 p.m. UTC
The of_find_i2c_adapter_by_node() could end up failing to find an
adapter in certain conditions. Specifically it's possible that
of_dev_or_parent_node_match() could end up finding an I2C client in
the list and cause bus_find_device() to stop early even though an I2C
adapter was present later in the list.

Let's move the i2c_verify_adapter() into the predicate function to
prevent this. Now we'll properly skip over the I2C client and be able
to find the I2C adapter.

This issue has always been a potential problem if a single device tree
node could represent both an I2C client and an adapter. I believe this
is a sane thing to do if, for instance, an I2C-connected DP bridge
chip is present. The bridge chip is an I2C client but it can also
provide an I2C adapter (DDC tunneled over AUX channel). We don't want
to have to create a sub-node just so a panel can link to it with the
"ddc-i2c-bus" property.

I believe that this problem got worse, however, with commit
e814e688413a ("i2c: of: Try to find an I2C adapter matching the
parent"). Starting at that commit it would be even easier to
accidentally miss finding the adapter.

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This commit is sorta just jammed into the middle of my series. It has
no dependencies on the earlier patches in the series and I think it
can land independently in the i2c tree. Later patches in the series
won't work right without this one, but they won't crash. If we can't
find the i2c bus we'll just fall back to the hardcoded panel modes
which, at least today, all panels have.

I'll also note that part of me wonders if we should actually fix this
further to run two passes through everything: first look to see if we
find an exact match and only look at the parent pointer if there is no
match. I don't currently have a need for that and it's a slightly
bigger change, but it seems conceivable that it could affect someone?

(no changes since v1)

 drivers/i2c/i2c-core-of.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)
diff mbox series


diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c
index 3ed74aa4b44b..de0bf5fce3a2 100644
--- a/drivers/i2c/i2c-core-of.c
+++ b/drivers/i2c/i2c-core-of.c
@@ -124,6 +124,14 @@  static int of_dev_or_parent_node_match(struct device *dev, const void *data)
 	return 0;
+static int of_i2c_adapter_match(struct device *dev, const void *data)
+	if (!of_dev_or_parent_node_match(dev, data))
+		return 0;
+	return !!i2c_verify_adapter(dev);
 /* must call put_device() when done with returned i2c_client device */
 struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
@@ -146,18 +154,13 @@  EXPORT_SYMBOL(of_find_i2c_device_by_node);
 struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
 	struct device *dev;
-	struct i2c_adapter *adapter;
 	dev = bus_find_device(&i2c_bus_type, NULL, node,
-			      of_dev_or_parent_node_match);
+			      of_i2c_adapter_match);
 	if (!dev)
 		return NULL;
-	adapter = i2c_verify_adapter(dev);
-	if (!adapter)
-		put_device(dev);
-	return adapter;
+	return to_i2c_adapter(dev);