diff mbox series

i2c: i801: Add support for Intel Alder Lake PCH-P

Message ID 20210114143811.1820137-1-jarkko.nikula@linux.intel.com
State Accepted
Headers show
Series i2c: i801: Add support for Intel Alder Lake PCH-P | expand

Commit Message

Jarkko Nikula Jan. 14, 2021, 2:38 p.m. UTC
Add PCI ID of SMBus controller on Intel Alder Lake PCH-P.

Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
---
 drivers/i2c/busses/i2c-i801.c | 4 ++++
 1 file changed, 4 insertions(+)

Comments

Wolfram Sang Jan. 28, 2021, 8:59 a.m. UTC | #1
On Thu, Jan 14, 2021 at 04:38:11PM +0200, Jarkko Nikula wrote:
> Add PCI ID of SMBus controller on Intel Alder Lake PCH-P.
> 
> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>

Do we still update Documentation/i2c/busses/i2c-i801.rst?

And maybe we should add Jarkko as i801 maintainer because Jean is usually
fine with such changes?

> ---
>  drivers/i2c/busses/i2c-i801.c | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index 4435e5fdc75e..b931b629b457 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -73,6 +73,7 @@
>   * Jasper Lake (SOC)		0x4da3	32	hard	yes	yes	yes
>   * Comet Lake-V (PCH)		0xa3a3	32	hard	yes	yes	yes
>   * Alder Lake-S (PCH)		0x7aa3	32	hard	yes	yes	yes
> + * Alder Lake-P (PCH)		0x51a3	32	hard	yes	yes	yes
>   *
>   * Features supported by this driver:
>   * Software PEC				no
> @@ -230,6 +231,7 @@
>  #define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS		0x43a3
>  #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS		0x4b23
>  #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS		0x4da3
> +#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS		0x51a3
>  #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
>  #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS		0x7aa3
>  #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
> @@ -1087,6 +1089,7 @@ static const struct pci_device_id i801_ids[] = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS) },
>  	{ 0, }
>  };
>  
> @@ -1776,6 +1779,7 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
>  	case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
>  	case PCI_DEVICE_ID_INTEL_EBG_SMBUS:
>  	case PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS:
> +	case PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS:
>  		priv->features |= FEATURE_BLOCK_PROC;
>  		priv->features |= FEATURE_I2C_BLOCK_READ;
>  		priv->features |= FEATURE_IRQ;
> -- 
> 2.29.2
>
Jarkko Nikula Feb. 1, 2021, 2:02 p.m. UTC | #2
On 1/28/21 10:59 AM, Wolfram Sang wrote:
> On Thu, Jan 14, 2021 at 04:38:11PM +0200, Jarkko Nikula wrote:
>> Add PCI ID of SMBus controller on Intel Alder Lake PCH-P.
>>
>> Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
> 
> Do we still update Documentation/i2c/busses/i2c-i801.rst?
> 
Actually need to avoid patching it and Kconfig for each new chipset 
variant and make them shorter was my motivation behind commit 
80d943ab19e9 ("i2c: i801: Consolidate chipset names in documentation and 
Kconfig").

Here Alder Lake name was added by the commit 332fdaebb64e ("i2c: i801: 
Add support for Intel Alder Lake PCH-S").

> And maybe we should add Jarkko as i801 maintainer because Jean is usually
> fine with such changes?
> 
I'm not sure am I up to the task? Meaning I don't feel I know it so 
well. I've been mostly adding new PCI IDs to new platforms.

Jarkko
Wolfram Sang Feb. 9, 2021, 10:45 a.m. UTC | #3
> Actually need to avoid patching it and Kconfig for each new chipset variant
> and make them shorter was my motivation behind commit 80d943ab19e9 ("i2c:
> i801: Consolidate chipset names in documentation and Kconfig").

OK, I'll try to remember next time ;)

> > And maybe we should add Jarkko as i801 maintainer because Jean is usually
> > fine with such changes?
> > 
> I'm not sure am I up to the task? Meaning I don't feel I know it so well.
> I've been mostly adding new PCI IDs to new platforms.

OK, I was just asking. Jean seems to be MIA, so:

Applied to for-next, thanks!
Jean Delvare Feb. 26, 2021, 4:35 p.m. UTC | #4
On Tue, 9 Feb 2021 11:45:17 +0100, Wolfram Sang wrote:
> > Actually need to avoid patching it and Kconfig for each new chipset variant
> > and make them shorter was my motivation behind commit 80d943ab19e9 ("i2c:
> > i801: Consolidate chipset names in documentation and Kconfig").  
> 
> OK, I'll try to remember next time ;)
> 
> > > And maybe we should add Jarkko as i801 maintainer because Jean is usually
> > > fine with such changes?
> > >   
> > I'm not sure am I up to the task? Meaning I don't feel I know it so well.
> > I've been mostly adding new PCI IDs to new platforms.  
> 
> OK, I was just asking. Jean seems to be MIA, so:
> 
> Applied to for-next, thanks!

Sorry, I somehow missed this thread. Looks all good to me, thanks
Jarkko and Wolfram.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
diff mbox series

Patch

diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 4435e5fdc75e..b931b629b457 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -73,6 +73,7 @@ 
  * Jasper Lake (SOC)		0x4da3	32	hard	yes	yes	yes
  * Comet Lake-V (PCH)		0xa3a3	32	hard	yes	yes	yes
  * Alder Lake-S (PCH)		0x7aa3	32	hard	yes	yes	yes
+ * Alder Lake-P (PCH)		0x51a3	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -230,6 +231,7 @@ 
 #define PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS		0x43a3
 #define PCI_DEVICE_ID_INTEL_ELKHART_LAKE_SMBUS		0x4b23
 #define PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS		0x4da3
+#define PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS		0x51a3
 #define PCI_DEVICE_ID_INTEL_BROXTON_SMBUS		0x5ad4
 #define PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS		0x7aa3
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_SMBUS		0x8c22
@@ -1087,6 +1089,7 @@  static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_TIGERLAKE_H_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS) },
 	{ 0, }
 };
 
@@ -1776,6 +1779,7 @@  static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	case PCI_DEVICE_ID_INTEL_JASPER_LAKE_SMBUS:
 	case PCI_DEVICE_ID_INTEL_EBG_SMBUS:
 	case PCI_DEVICE_ID_INTEL_ALDER_LAKE_S_SMBUS:
+	case PCI_DEVICE_ID_INTEL_ALDER_LAKE_P_SMBUS:
 		priv->features |= FEATURE_BLOCK_PROC;
 		priv->features |= FEATURE_I2C_BLOCK_READ;
 		priv->features |= FEATURE_IRQ;