From patchwork Tue Apr 7 18:11:16 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans de Goede X-Patchwork-Id: 1267556 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: ozlabs.org; spf=none (no SPF record) smtp.mailfrom=vger.kernel.org (client-ip=209.132.180.67; helo=vger.kernel.org; envelope-from=linux-i2c-owner@vger.kernel.org; receiver=) Authentication-Results: ozlabs.org; dmarc=pass (p=none dis=none) header.from=redhat.com Authentication-Results: ozlabs.org; dkim=pass (1024-bit key; unprotected) header.d=redhat.com header.i=@redhat.com header.a=rsa-sha256 header.s=mimecast20190719 header.b=LCy6B1OA; dkim-atps=neutral Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by ozlabs.org (Postfix) with ESMTP id 48xb803Wscz9sR4 for ; Wed, 8 Apr 2020 04:11:28 +1000 (AEST) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1726386AbgDGSL1 (ORCPT ); Tue, 7 Apr 2020 14:11:27 -0400 Received: from us-smtp-2.mimecast.com ([207.211.31.81]:29166 "EHLO us-smtp-delivery-1.mimecast.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1726339AbgDGSL1 (ORCPT ); Tue, 7 Apr 2020 14:11:27 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=redhat.com; s=mimecast20190719; t=1586283085; h=from:from:reply-to:subject:subject:date:date:message-id:message-id: to:to:cc:cc:mime-version:mime-version: content-transfer-encoding:content-transfer-encoding; bh=tuL8jd0KtgUQDBTiliOb/iyftwg57mLjnYugyIVReUI=; b=LCy6B1OARDV2xxaNcCMqbXqZVRhhC055r2DBglhO6pDarcgt9x9nKH7sz3KPCvKMO6B+/H zRGQhtdYPAgavyVQTs6wecPSLhj1uFbE+klyhiBHbq7aN85R86yU5jH8Hu9JQ7usfrN2mT 51hVMtme4f38XhvORmbDUsRF3yVj3HA= Received: from mimecast-mx01.redhat.com (mimecast-mx01.redhat.com [209.132.183.4]) (Using TLS) by relay.mimecast.com with ESMTP id us-mta-27-0TUKg2RqP36k0y_mReO5rQ-1; Tue, 07 Apr 2020 14:11:21 -0400 X-MC-Unique: 0TUKg2RqP36k0y_mReO5rQ-1 Received: from smtp.corp.redhat.com (int-mx04.intmail.prod.int.phx2.redhat.com [10.5.11.14]) (using TLSv1.2 with cipher AECDH-AES256-SHA (256/256 bits)) (No client certificate requested) by mimecast-mx01.redhat.com (Postfix) with ESMTPS id 3779B1005510; Tue, 7 Apr 2020 18:11:20 +0000 (UTC) Received: from x1.localdomain.com (ovpn-112-63.ams2.redhat.com [10.36.112.63]) by smtp.corp.redhat.com (Postfix) with ESMTP id 1FCED5DDA5; Tue, 7 Apr 2020 18:11:17 +0000 (UTC) From: Hans de Goede To: "Rafael J . Wysocki" , Jarkko Nikula , Wolfram Sang , Andy Shevchenko , Mika Westerberg Cc: Hans de Goede , linux-i2c@vger.kernel.org, linux-acpi@vger.kernel.org, stable@vger.kernel.org Subject: [PATCH] i2c: designware: platdrv: Remove DPM_FLAG_SMART_SUSPEND flag on BYT and CHT Date: Tue, 7 Apr 2020 20:11:16 +0200 Message-Id: <20200407181116.61066-1-hdegoede@redhat.com> MIME-Version: 1.0 X-Scanned-By: MIMEDefang 2.79 on 10.5.11.14 Sender: linux-i2c-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-i2c@vger.kernel.org We already set DPM_FLAG_SMART_PREPARE, so we completely skip all callbacks (other then prepare) where possible, quoting from dw_i2c_plat_prepare(): /* * If the ACPI companion device object is present for this device, it * may be accessed during suspend and resume of other devices via I2C * operation regions, so tell the PM core and middle layers to avoid * skipping system suspend/resume callbacks for it in that case. */ return !has_acpi_companion(dev); Also setting the DPM_FLAG_SMART_SUSPEND will cause acpi_subsys_suspend() to leave the controller runtime-suspended even if dw_i2c_plat_prepare() returned 0. Leaving the controller runtime-suspended normally, when the I2C controller is suspended during the suspend_late phase, is not an issue because the pm_runtime_get_sync() done by i2c_dw_xfer() will (runtime-)resume it. But for dw I2C controllers on Bay- and Cherry-Trail devices acpi_lpss.c leaves the controller alive until the suspend_noirq phase, because it may be used by the _PS3 ACPI methods of PCI devices and PCI devices are left powered on until the suspend_noirq phase. Between the suspend_late and resume_early phases runtime-pm is disabled. So for any ACPI I2C OPRegion accesses done after the suspend_late phase, the pm_runtime_get_sync() done by i2c_dw_xfer() is a no-op and the controller is left runtime-suspended. i2c_dw_xfer() has a check to catch this condition (rather then waiting for the I2C transfer to timeout because the controller is suspended). acpi_subsys_suspend() leaving the controller runtime-suspended in combination with an ACPI I2C OPRegion access done after the suspend_late phase triggers this check, leading to the following error being logged on a Bay Trail based Lenovo Thinkpad 8 tablet: [ 93.275882] i2c_designware 80860F41:00: Transfer while suspended [ 93.275993] WARNING: CPU: 0 PID: 412 at drivers/i2c/busses/i2c-designware-master.c:429 i2c_dw_xfer+0x239/0x280 ... [ 93.276252] Workqueue: kacpi_notify acpi_os_execute_deferred [ 93.276267] RIP: 0010:i2c_dw_xfer+0x239/0x280 ... [ 93.276340] Call Trace: [ 93.276366] __i2c_transfer+0x121/0x520 [ 93.276379] i2c_transfer+0x4c/0x100 [ 93.276392] i2c_acpi_space_handler+0x219/0x510 [ 93.276408] ? up+0x40/0x60 [ 93.276419] ? i2c_acpi_notify+0x130/0x130 [ 93.276433] acpi_ev_address_space_dispatch+0x1e1/0x252 ... So since on BYT and CHT platforms we want ACPI I2c OPRegion accesses to work until the suspend_noirq phase, we need the controller to be runtime-resumed during the suspend phase if it is runtime-suspended suspended at that time. This means that we must not set the DPM_FLAG_SMART_SUSPEND on these platforms. On BYT and CHT we already have a special ACCESS_NO_IRQ_SUSPEND flag to make sure the controller stays functional until the suspend_noirq phase. This commit makes the driver not set the DPM_FLAG_SMART_SUSPEND flag when that flag is set. Cc: stable@vger.kernel.org Fixes: b30f2f65568f ("i2c: designware: Set IRQF_NO_SUSPEND flag for all BYT and CHT controllers") Signed-off-by: Hans de Goede Reviewed-by: Andy Shevchenko Acked-by: Rafael J. Wysocki Acked-by: Jarkko Nikula --- drivers/i2c/busses/i2c-designware-platdrv.c | 14 ++++++++++---- 1 file changed, 10 insertions(+), 4 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 3b7d58c2fe85..15b4b965b443 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -371,10 +371,16 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) adap->dev.of_node = pdev->dev.of_node; adap->nr = -1; - dev_pm_set_driver_flags(&pdev->dev, - DPM_FLAG_SMART_PREPARE | - DPM_FLAG_SMART_SUSPEND | - DPM_FLAG_LEAVE_SUSPENDED); + if (dev->flags & ACCESS_NO_IRQ_SUSPEND) { + dev_pm_set_driver_flags(&pdev->dev, + DPM_FLAG_SMART_PREPARE | + DPM_FLAG_LEAVE_SUSPENDED); + } else { + dev_pm_set_driver_flags(&pdev->dev, + DPM_FLAG_SMART_PREPARE | + DPM_FLAG_SMART_SUSPEND | + DPM_FLAG_LEAVE_SUSPENDED); + } /* The code below assumes runtime PM to be disabled. */ WARN_ON(pm_runtime_enabled(&pdev->dev));