| Message ID | 20190924193054.GA2215@kunai |
|---|---|
| State | Accepted |
| Headers | show |
| Series | [PULL,REQUEST] i2c for 5.4 | expand |
On Tue, Sep 24, 2019 at 12:31 PM Wolfram Sang <wsa@the-dreams.de> wrote: > > - new driver for ICY, an Amiga Zorro card :) Christ. Will that thing _never_ die? But the reason I'm actually replying is not to comment on the apparent death-defying Amiga hardware scene, but to point out that you should try to fix your email configuration: > Bj??rn Ard?? (2): > i2c-eeprom_slave: Add support for more eeprom models > i2c: slave-eeprom: Add comment about address handling This is all fine in the git repo, being proper utf-8 "Björn Ardö". But your mutt setup doesn't seem to be using a proper utf-8 locale and instead uses Content-Type: text/plain; charset=us-ascii Content-Disposition: inline like it was the last century. I don't know what the proper mutt incantation is to make it join the modern world, but I'm sure one exists, and then your emails would get names right too. Even if they are some funky Swedish ones with åäö. (And no, don't use Latin1 - it may cover Swedish and German etc, but you really want to go with proper utf-8 and be able to handle true complex character sets, not just the Western European ones). Linus
The pull request you sent on Tue, 24 Sep 2019 21:31:03 +0200:
> git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-5.4
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/351c8a09b00b5c51c8f58b016fffe51f87e2d820
Thank you!
Hi Linus, > > - new driver for ICY, an Amiga Zorro card :) > > Christ. Will that thing _never_ die? Well, a couple of happy users there... > I don't know what the proper mutt incantation is to make it join the > modern world, but I'm sure one exists, and then your emails would get > names right too. Even if they are some funky Swedish ones with åäö. Sorry, my template for pull-requests had bogus header overriding the default utf-8 of my config. I fixed it now. Thanks for pointing it out. > (And no, don't use Latin1 - it may cover Swedish and German etc, but > you really want to go with proper utf-8 and be able to handle true > complex character sets, not just the Western European ones). Heh, no need to convince me, I am all for utf-8! Regards, Wolfram
Linus, I2C has this time: - new driver for ICY, an Amiga Zorro card :) - axxia driver gained slave mode support, NXP driver gained ACPI - the slave EEPROM backend gained 16 bit address support - and lots of regular driver updates and reworks Please pull. Thanks, Wolfram The following changes since commit 609488bc979f99f805f34e9a32c1e3b71179d10b: Linux 5.3-rc2 (2019-07-28 12:47:02 -0700) are available in the Git repository at: git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/for-5.4 for you to fetch changes up to 8ebf15e9c869e764b3aab4928938ee68c0e2bd6d: i2c: tegra: Move suspend handling to NOIRQ phase (2019-09-13 15:17:23 +0100) ---------------------------------------------------------------- Adamski, Krzysztof (Nokia - PL/Wroclaw) (1): i2c: axxia: support slave mode Andy Shevchenko (3): i2c: Drop unneeded check for of_node i2c: designware: assert reset when error happen at ->probe() i2c: designware: Fix optional reset error handling Anson Huang (2): i2c: mxs: use devm_platform_ioremap_resource() to simplify code i2c: imx-lpi2c: use devm_platform_ioremap_resource() to simplify code Baolin Wang (3): i2c: sprd: Make I2C driver can be built as a module i2c: sprd: Change to use devm_platform_ioremap_resource() i2c: sprd: Validate the return value of clock initialization Bartosz Golaszewski (1): eeprom: at24: remove unneeded include Bj??rn Ard?? (2): i2c-eeprom_slave: Add support for more eeprom models i2c: slave-eeprom: Add comment about address handling Chuanhua Han (1): i2c: imx: ACPI support for NXP i2c controller Chuhong Yuan (1): i2c: busses: Use dev_get_drvdata where possible Dmitry Osipenko (1): i2c: tegra: Compile PM functions unconditionally Federico Vaga (1): i2c: ocores: use request_any_context_irq() to register IRQ handler Felipe Balbi (1): i2c: designware-pci: Switch over to MSI interrupts Fuqian Huang (1): i2c: ismt: Remove call to memset after dmam_alloc_coherent Hans de Goede (1): i2c-cht-wc: Fix lockdep warning Jarkko Nikula (1): i2c: designware-pci: Add support for Elkhart Lake PSE I2C Jean Delvare (2): i2c: piix4: Fix probing of reserved ports on AMD Family 16h Model 30h i2c: piix4: Add ACPI support Jon Hunter (1): i2c: tegra: Move suspend handling to NOIRQ phase Lori Hikichi (1): i2c: iproc: Add full name of devicetree node to adapter name Masahiro Yamada (2): i2c: uniphier(-f): use devm_platform_ioremap_resource() i2c: uniphier(-f): remove all dev_dbg() Max Staudt (2): i2c: Add i2c-icy for I2C on m68k/Amiga i2c: icy: Add LTC2990 present on 2019 board revision Mika Westerberg (2): watchdog: iTCO: Add support for Cannon Lake PCH iTCO i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond Nishka Dasgupta (5): i2c: taos-evm: Make structure tsl2550_info constant i2c: iproc: Make bcm_iproc_i2c_quirks constant i2c: synquacer: Make synquacer_i2c_ops constant i2c: fsi: Add of_put_node() before break i2c: stm32f7: Make structure stm32f7_i2c_algo constant Sebastian Andrzej Siewior (2): i2c: hix5hd2: Remove IRQF_ONESHOT i2c: exynos5: Remove IRQF_ONESHOT Shaokun Zhang (1): i2c: designware: Fix unused variable warning Simon Horman (6): dt-bindings: i2c: sh_mobile: Rename bindings documentation file dt-bindings: i2c: rcar: Rename bindings documentation file dt-bindings: i2c: riic: Rename bindings documentation file dt-bindings: i2c: riic: Rename bindings documentation file dt-bindings: i2c: rcar: Rename bindings documentation file dt-bindings: i2c: i2c-emev2: Rename bindings documentation file Stefan Wahren (3): dt-bindings: i2c: bcm2835: Add brcm,bcm2711 compatible i2c: bcm2835: Avoid clk stretch quirk for BCM2711 i2c: bcm2835: Add full name of devicetree node to adapter name Uwe Kleine-K??nig (1): i2c: designware: make use of devm_gpiod_get_optional Wolfram Sang (5): Revert "dt-bindings: i2c: rcar: Rename bindings documentation file" Revert "dt-bindings: i2c: riic: Rename bindings documentation file" i2c: replace i2c_new_secondary_device with an ERR_PTR variant Merge tag 'at24-v5.4-updates-for-wolfram' of git://git.kernel.org/.../brgl/linux into i2c/for-5.4 i2c: cht-wc: drop check because i2c_unregister_device() is NULL safe with much appreciated quality assurance from ---------------------------------------------------------------- Alexander Sverdlin (1): (Rev.) i2c: axxia: support slave mode Andrew Lunn (1): (Rev.) i2c: ocores: use request_any_context_irq() to register IRQ handler Andy Shevchenko (4): (Rev.) i2c: imx: ACPI support for NXP i2c controller (Rev.) i2c: designware-pci: Add support for Elkhart Lake PSE I2C (Rev.) i2c: designware: Fix unused variable warning (Rev.) i2c: designware: make use of devm_gpiod_get_optional Benjamin Rouxel (1): (Test) i2c: exynos5: Remove IRQF_ONESHOT Dong Aisheng (1): (Rev.) i2c: mxs: use devm_platform_ioremap_resource() to simplify code Eddie James (1): (Rev.) i2c: fsi: Add of_put_node() before break Eric Anholt (2): (Rev.) i2c: bcm2835: Avoid clk stretch quirk for BCM2711 (Rev.) dt-bindings: i2c: bcm2835: Add brcm,bcm2711 compatible Geert Uytterhoeven (8): (Rev.) i2c: icy: Add LTC2990 present on 2019 board revision (Rev.) i2c: Add i2c-icy for I2C on m68k/Amiga (Rev.) dt-bindings: i2c: i2c-emev2: Rename bindings documentation file (Rev.) dt-bindings: i2c: rcar: Rename bindings documentation file (Rev.) dt-bindings: i2c: riic: Rename bindings documentation file (Rev.) dt-bindings: i2c: riic: Rename bindings documentation file (Rev.) dt-bindings: i2c: rcar: Rename bindings documentation file (Rev.) dt-bindings: i2c: sh_mobile: Rename bindings documentation file Hans Verkuil (1): (Rev.) i2c: replace i2c_new_secondary_device with an ERR_PTR variant Jean Delvare (4): (Rev.) i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond (Rev.) watchdog: iTCO: Add support for Cannon Lake PCH iTCO (Rev.) i2c: taos-evm: Make structure tsl2550_info constant (Rev.) i2c: busses: Use dev_get_drvdata where possible Kieran Bingham (1): (Rev.) i2c: replace i2c_new_secondary_device with an ERR_PTR variant Krzysztof Kozlowski (1): (Test) i2c: exynos5: Remove IRQF_ONESHOT Laurent Pinchart (1): (Rev.) i2c: replace i2c_new_secondary_device with an ERR_PTR variant Oleksij Rempel (1): (Test) i2c: imx: ACPI support for NXP i2c controller Peter Korsgaard (1): (Rev.) i2c: ocores: use request_any_context_irq() to register IRQ handler Ray Jui (2): (Rev.) i2c: iproc: Make bcm_iproc_i2c_quirks constant (Rev.) i2c: iproc: Add full name of devicetree node to adapter name Rob Herring (1): (Rev.) dt-bindings: i2c: bcm2835: Add brcm,bcm2711 compatible .../devicetree/bindings/i2c/brcm,bcm2835-i2c.txt | 4 +- .../bindings/i2c/{i2c-rcar.txt => renesas,i2c.txt} | 0 .../i2c/{i2c-emev2.txt => renesas,iic-emev2.txt} | 0 .../i2c/{i2c-sh_mobile.txt => renesas,iic.txt} | 0 .../i2c/{i2c-riic.txt => renesas,riic.txt} | 0 MAINTAINERS | 14 +- drivers/acpi/acpi_apd.c | 7 + drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 18 +- drivers/i2c/busses/Kconfig | 17 +- drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-axxia.c | 152 +++++++++++++- drivers/i2c/busses/i2c-bcm-iproc.c | 6 +- drivers/i2c/busses/i2c-bcm2835.c | 11 +- drivers/i2c/busses/i2c-cht-wc.c | 49 ++++- drivers/i2c/busses/i2c-designware-master.c | 14 +- drivers/i2c/busses/i2c-designware-pcidrv.c | 41 +++- drivers/i2c/busses/i2c-designware-platdrv.c | 22 +- drivers/i2c/busses/i2c-exynos5.c | 4 +- drivers/i2c/busses/i2c-fsi.c | 4 +- drivers/i2c/busses/i2c-hix5hd2.c | 3 +- drivers/i2c/busses/i2c-i801.c | 145 ++++++++----- drivers/i2c/busses/i2c-icy.c | 230 +++++++++++++++++++++ drivers/i2c/busses/i2c-imx-lpi2c.c | 4 +- drivers/i2c/busses/i2c-imx.c | 17 +- drivers/i2c/busses/i2c-ismt.c | 2 - drivers/i2c/busses/i2c-mxs.c | 4 +- drivers/i2c/busses/i2c-ocores.c | 5 +- drivers/i2c/busses/i2c-piix4.c | 34 ++- drivers/i2c/busses/i2c-sprd.c | 25 +-- drivers/i2c/busses/i2c-stm32f7.c | 2 +- drivers/i2c/busses/i2c-synquacer.c | 2 +- drivers/i2c/busses/i2c-taos-evm.c | 2 +- drivers/i2c/busses/i2c-tegra.c | 56 +++-- drivers/i2c/busses/i2c-uniphier-f.c | 26 +-- drivers/i2c/busses/i2c-uniphier.c | 22 +- drivers/i2c/i2c-core-base.c | 20 +- drivers/i2c/i2c-slave-eeprom.c | 42 +++- drivers/media/i2c/adv748x/adv748x-core.c | 6 +- drivers/media/i2c/adv7604.c | 22 +- drivers/misc/eeprom/at24.c | 1 - drivers/watchdog/iTCO_wdt.c | 26 ++- include/linux/i2c.h | 2 +- 42 files changed, 795 insertions(+), 267 deletions(-) rename Documentation/devicetree/bindings/i2c/{i2c-rcar.txt => renesas,i2c.txt} (100%) rename Documentation/devicetree/bindings/i2c/{i2c-emev2.txt => renesas,iic-emev2.txt} (100%) rename Documentation/devicetree/bindings/i2c/{i2c-sh_mobile.txt => renesas,iic.txt} (100%) rename Documentation/devicetree/bindings/i2c/{i2c-riic.txt => renesas,riic.txt} (100%) create mode 100644 drivers/i2c/busses/i2c-icy.c