diff mbox series

[v15,1/2] i2c: buses: add i2c bus driver for NVIDIA GPU

Message ID 20181026163659.21590-2-ajayg@nvidia.com
State Accepted
Headers show
Series Add support for USB Type-C interface on latest NVIDIA GPU | expand

Commit Message

Ajay Gupta Oct. 26, 2018, 4:36 p.m. UTC
Latest NVIDIA GPU card has USB Type-C interface. There is a
Type-C controller which can be accessed over I2C.

This driver adds I2C bus driver to communicate with Type-C controller.
I2C client driver will be part of USB Type-C UCSI driver.

Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
---
Changes from v1 -> v2
	None
Changes from v2 -> v3
	Fixed review comments from Andy and Thierry
	Rename i2c-gpu.c -> i2c-nvidia-gpu.c
Changes from v3 -> v4
	Fixed review comments from Andy
Changes from v4 -> v5
	Fixed review comments from Andy
Changes from v5 -> v6
	None 
Changes from v6 -> v7 -> v8
	Fixed review comments from Peter 
	- Add implicit STOP for last write message
	- Add i2c_adapter_quirks with max_read_len and
	  I2C_AQ_COMB flags
Changes from v8 -> v9
	Fixed review comments from Peter
	- Drop do_start flag
	- Use i2c_8bit_addr_from_msg()
Changes from v9 -> v10
	Fixed review comments from Peter
	- Dropped I2C_FUNC_SMBUS_EMUL
	- Dropped local mutex
Changes from v10 -> v11
	Fixed review comments from Peter
	- Moved stop in master_xfer at end of message
	- Change i2c_read without STOP
	- Dropped I2C_AC_COMB* flags
Changes from v11 -> v12
	Fixed review comments from Peter
	- Removed clearing of empty bits
	- Fix master_xfer for correct stop use
Changes from v12 -> v13
	Fixed review comments from Peter
	- Added comments on 4 byte read limitation
	- Added I2C_AC_COMB* flags
Changes from v13 -> v14 -> v15
	None

 Documentation/i2c/busses/i2c-nvidia-gpu |  18 ++
 MAINTAINERS                             |   7 +
 drivers/i2c/busses/Kconfig              |   9 +
 drivers/i2c/busses/Makefile             |   1 +
 drivers/i2c/busses/i2c-nvidia-gpu.c     | 368 ++++++++++++++++++++++++
 5 files changed, 403 insertions(+)
 create mode 100644 Documentation/i2c/busses/i2c-nvidia-gpu
 create mode 100644 drivers/i2c/busses/i2c-nvidia-gpu.c

Comments

Wolfram Sang Nov. 9, 2018, 4:43 p.m. UTC | #1
On Fri, Oct 26, 2018 at 09:36:58AM -0700, Ajay Gupta wrote:
> Latest NVIDIA GPU card has USB Type-C interface. There is a
> Type-C controller which can be accessed over I2C.
> 
> This driver adds I2C bus driver to communicate with Type-C controller.
> I2C client driver will be part of USB Type-C UCSI driver.
> 
> Signed-off-by: Ajay Gupta <ajayg@nvidia.com>

I have some minor comments, yet the driver is good enough to be applied,
I think. Thanks to all involved in reviewing this! I'll use the rc1 rule
for new drivers and send my comments as incremental patches. So:

Applied to for-current, thanks!

I will leave the USB part of this series for the USB subsystem. If I
shall take it through I2C, please let me know.
Wolfram Sang Nov. 9, 2018, 4:49 p.m. UTC | #2
> @@ -140,5 +140,6 @@ obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
>  obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
>  obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
>  obj-$(CONFIG_I2C_FSI)		+= i2c-fsi.o
> +obj-$(CONFIG_I2C_NVIDIA_GPU)	+= i2c-nvidia-gpu.o

Oh, I fixed this up and moved it to the place where it is corresponding
to in Kconfig.

> +static u32 gpu_i2c_functionality(struct i2c_adapter *adap)
> +{
> +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
> +}

I can't send an incremental patch for this, I need to ask: did you try
SMBUS_QUICK with it? Given the restrictions of this controller, I have
my doubts. I might be wrong, though. 'i2cdetect' from i2c-tools lets you
easily check it.
Ajay Gupta Nov. 9, 2018, 5:27 p.m. UTC | #3
Hi Wolfram,
> > Latest NVIDIA GPU card has USB Type-C interface. There is a Type-C
> > controller which can be accessed over I2C.
> >
> > This driver adds I2C bus driver to communicate with Type-C controller.
> > I2C client driver will be part of USB Type-C UCSI driver.
> >
> > Signed-off-by: Ajay Gupta <ajayg@nvidia.com>
> 
> I have some minor comments, yet the driver is good enough to be applied, I
> think. Thanks to all involved in reviewing this! I'll use the rc1 rule for new
> drivers and send my comments as incremental patches. So:
> 
> Applied to for-current, thanks!
Thanks so much.

> I will leave the USB part of this series for the USB subsystem. If I shall take it
> through I2C, please let me know.
It will be good if both of them can go together either through I2C or 
USB subsystem. Since USB part is reviewed and has Acked-by Heikki so please
take that also.

Thanks
Ajay
> nvpublic
Wolfram Sang Nov. 9, 2018, 5:54 p.m. UTC | #4
> It will be good if both of them can go together either through I2C or 
> USB subsystem. Since USB part is reviewed and has Acked-by Heikki so please
> take that also.

Hmmm, technicallly, there is no need to let them go together. There is
no strict dependency. Yet, since Heikki gave his ack, I assume he wants
it to go via I2C, too. I will make an exception this time and take it.
Ajay Gupta Nov. 9, 2018, 6:04 p.m. UTC | #5
Hi Wolfram,
> > It will be good if both of them can go together either through I2C or
> > USB subsystem. Since USB part is reviewed and has Acked-by Heikki so
> > please take that also.
> 
> Hmmm, technicallly, there is no need to let them go together. There is no
> strict dependency.
Agree.

> Yet, since Heikki gave his ack, I assume he wants it to go via
> I2C, too. I will make an exception this time and take it.
Thanks

> nvpublic
Ajay Gupta Nov. 9, 2018, 6:28 p.m. UTC | #6
Hi Wolfram,

> > @@ -140,5 +140,6 @@ obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
> >  obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
> >  obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
> >  obj-$(CONFIG_I2C_FSI)		+= i2c-fsi.o
> > +obj-$(CONFIG_I2C_NVIDIA_GPU)	+= i2c-nvidia-gpu.o
> 
> Oh, I fixed this up and moved it to the place where it is corresponding to in
> Kconfig.
Thanks!

> 
> > +static u32 gpu_i2c_functionality(struct i2c_adapter *adap) {
> > +	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; }
> 
> I can't send an incremental patch for this, I need to ask: did you try
> SMBUS_QUICK with it?
Tried it today using i2cdetect and it looks good to me.

$ sudo i2cdetect  -l
i2c-4   i2c             NVIDIA GPU I2C adapter                  I2C adapter

$ sudo i2cdetect  -q  4
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-4 using quick write commands.
I will probe address range 0x03-0x77.
Continue? [Y/n] Y
     0  1  2  3  4  5  6  7  8  9  a  b  c  d  e  f
00:            -- -- -- -- -- 08 -- -- -- -- -- -- --
10: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
20: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
30: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
40: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
50: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
60: -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- --
70: -- -- -- -- -- -- -- --

Thanks
Ajay
> nvpublic
> Given the restrictions of this controller, I have my
> doubts. I might be wrong, though. 'i2cdetect' from i2c-tools lets you easily
> check it.
Wolfram Sang Nov. 9, 2018, 6:40 p.m. UTC | #7
> > I can't send an incremental patch for this, I need to ask: did you try
> > SMBUS_QUICK with it?
> Tried it today using i2cdetect and it looks good to me.

Yup, looks good. Thanks for checking!
diff mbox series

Patch

diff --git a/Documentation/i2c/busses/i2c-nvidia-gpu b/Documentation/i2c/busses/i2c-nvidia-gpu
new file mode 100644
index 000000000000..31884d2b2eb5
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-nvidia-gpu
@@ -0,0 +1,18 @@ 
+Kernel driver i2c-nvidia-gpu
+
+Datasheet: not publicly available.
+
+Authors:
+	Ajay Gupta <ajayg@nvidia.com>
+
+Description
+-----------
+
+i2c-nvidia-gpu is a driver for I2C controller included in NVIDIA Turing
+and later GPUs and it is used to communicate with Type-C controller on GPUs.
+
+If your 'lspci -v' listing shows something like the following,
+
+01:00.3 Serial bus controller [0c80]: NVIDIA Corporation Device 1ad9 (rev a1)
+
+then this driver should support the I2C controller of your GPU.
diff --git a/MAINTAINERS b/MAINTAINERS
index bd702ad56c7f..5885a0931de9 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6843,6 +6843,13 @@  L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/i2c-core-acpi.c
 
+I2C CONTROLLER DRIVER FOR NVIDIA GPU
+M:	Ajay Gupta <ajayg@nvidia.com>
+L:	linux-i2c@vger.kernel.org
+S:	Maintained
+F:	Documentation/i2c/busses/i2c-nvidia-gpu
+F:	drivers/i2c/busses/i2c-nvidia-gpu.c
+
 I2C MUXES
 M:	Peter Rosin <peda@axentia.se>
 L:	linux-i2c@vger.kernel.org
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 451d4ae50e66..eed827b44068 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -224,6 +224,15 @@  config I2C_NFORCE2_S4985
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-nforce2-s4985.
 
+config I2C_NVIDIA_GPU
+	tristate "NVIDIA GPU I2C controller"
+	depends on PCI
+	help
+	  If you say yes to this option, support will be included for the
+	  NVIDIA GPU I2C controller which is used to communicate with the GPU's
+	  Type-C controller. This driver can also be built as a module called
+	  i2c-nvidia-gpu.
+
 config I2C_SIS5595
 	tristate "SiS 5595"
 	depends on PCI
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 18b26af82b1c..d499813df038 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -140,5 +140,6 @@  obj-$(CONFIG_I2C_SIBYTE)	+= i2c-sibyte.o
 obj-$(CONFIG_I2C_XGENE_SLIMPRO) += i2c-xgene-slimpro.o
 obj-$(CONFIG_SCx200_ACB)	+= scx200_acb.o
 obj-$(CONFIG_I2C_FSI)		+= i2c-fsi.o
+obj-$(CONFIG_I2C_NVIDIA_GPU)	+= i2c-nvidia-gpu.o
 
 ccflags-$(CONFIG_I2C_DEBUG_BUS) := -DDEBUG
diff --git a/drivers/i2c/busses/i2c-nvidia-gpu.c b/drivers/i2c/busses/i2c-nvidia-gpu.c
new file mode 100644
index 000000000000..744f5e42636b
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nvidia-gpu.c
@@ -0,0 +1,368 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Nvidia GPU I2C controller Driver
+ *
+ * Copyright (C) 2018 NVIDIA Corporation. All rights reserved.
+ * Author: Ajay Gupta <ajayg@nvidia.com>
+ */
+#include <linux/delay.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+
+#include <asm/unaligned.h>
+
+/* I2C definitions */
+#define I2C_MST_CNTL				0x00
+#define I2C_MST_CNTL_GEN_START			BIT(0)
+#define I2C_MST_CNTL_GEN_STOP			BIT(1)
+#define I2C_MST_CNTL_CMD_READ			(1 << 2)
+#define I2C_MST_CNTL_CMD_WRITE			(2 << 2)
+#define I2C_MST_CNTL_BURST_SIZE_SHIFT		6
+#define I2C_MST_CNTL_GEN_NACK			BIT(28)
+#define I2C_MST_CNTL_STATUS			GENMASK(30, 29)
+#define I2C_MST_CNTL_STATUS_OKAY		(0 << 29)
+#define I2C_MST_CNTL_STATUS_NO_ACK		(1 << 29)
+#define I2C_MST_CNTL_STATUS_TIMEOUT		(2 << 29)
+#define I2C_MST_CNTL_STATUS_BUS_BUSY		(3 << 29)
+#define I2C_MST_CNTL_CYCLE_TRIGGER		BIT(31)
+
+#define I2C_MST_ADDR				0x04
+
+#define I2C_MST_I2C0_TIMING				0x08
+#define I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ		0x10e
+#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT		16
+#define I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX		255
+#define I2C_MST_I2C0_TIMING_TIMEOUT_CHECK		BIT(24)
+
+#define I2C_MST_DATA					0x0c
+
+#define I2C_MST_HYBRID_PADCTL				0x20
+#define I2C_MST_HYBRID_PADCTL_MODE_I2C			BIT(0)
+#define I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV		BIT(14)
+#define I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV		BIT(15)
+
+struct gpu_i2c_dev {
+	struct device *dev;
+	void __iomem *regs;
+	struct i2c_adapter adapter;
+	struct i2c_board_info *gpu_ccgx_ucsi;
+};
+
+static void gpu_enable_i2c_bus(struct gpu_i2c_dev *i2cd)
+{
+	u32 val;
+
+	/* enable I2C */
+	val = readl(i2cd->regs + I2C_MST_HYBRID_PADCTL);
+	val |= I2C_MST_HYBRID_PADCTL_MODE_I2C |
+		I2C_MST_HYBRID_PADCTL_I2C_SCL_INPUT_RCV |
+		I2C_MST_HYBRID_PADCTL_I2C_SDA_INPUT_RCV;
+	writel(val, i2cd->regs + I2C_MST_HYBRID_PADCTL);
+
+	/* enable 100KHZ mode */
+	val = I2C_MST_I2C0_TIMING_SCL_PERIOD_100KHZ;
+	val |= (I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT_MAX
+	    << I2C_MST_I2C0_TIMING_TIMEOUT_CLK_CNT);
+	val |= I2C_MST_I2C0_TIMING_TIMEOUT_CHECK;
+	writel(val, i2cd->regs + I2C_MST_I2C0_TIMING);
+}
+
+static int gpu_i2c_check_status(struct gpu_i2c_dev *i2cd)
+{
+	unsigned long target = jiffies + msecs_to_jiffies(1000);
+	u32 val;
+
+	do {
+		val = readl(i2cd->regs + I2C_MST_CNTL);
+		if (!(val & I2C_MST_CNTL_CYCLE_TRIGGER))
+			break;
+		if ((val & I2C_MST_CNTL_STATUS) !=
+				I2C_MST_CNTL_STATUS_BUS_BUSY)
+			break;
+		usleep_range(500, 600);
+	} while (time_is_after_jiffies(target));
+
+	if (time_is_before_jiffies(target)) {
+		dev_err(i2cd->dev, "i2c timeout error %x\n", val);
+		return -ETIME;
+	}
+
+	val = readl(i2cd->regs + I2C_MST_CNTL);
+	switch (val & I2C_MST_CNTL_STATUS) {
+	case I2C_MST_CNTL_STATUS_OKAY:
+		return 0;
+	case I2C_MST_CNTL_STATUS_NO_ACK:
+		return -EIO;
+	case I2C_MST_CNTL_STATUS_TIMEOUT:
+		return -ETIME;
+	default:
+		return 0;
+	}
+}
+
+static int gpu_i2c_read(struct gpu_i2c_dev *i2cd, u8 *data, u16 len)
+{
+	int status;
+	u32 val;
+
+	val = I2C_MST_CNTL_GEN_START | I2C_MST_CNTL_CMD_READ |
+		(len << I2C_MST_CNTL_BURST_SIZE_SHIFT) |
+		I2C_MST_CNTL_CYCLE_TRIGGER | I2C_MST_CNTL_GEN_NACK;
+	writel(val, i2cd->regs + I2C_MST_CNTL);
+
+	status = gpu_i2c_check_status(i2cd);
+	if (status < 0)
+		return status;
+
+	val = readl(i2cd->regs + I2C_MST_DATA);
+	switch (len) {
+	case 1:
+		data[0] = val;
+		break;
+	case 2:
+		put_unaligned_be16(val, data);
+		break;
+	case 3:
+		put_unaligned_be16(val >> 8, data);
+		data[2] = val;
+		break;
+	case 4:
+		put_unaligned_be32(val, data);
+		break;
+	default:
+		break;
+	}
+	return status;
+}
+
+static int gpu_i2c_start(struct gpu_i2c_dev *i2cd)
+{
+	writel(I2C_MST_CNTL_GEN_START, i2cd->regs + I2C_MST_CNTL);
+	return gpu_i2c_check_status(i2cd);
+}
+
+static int gpu_i2c_stop(struct gpu_i2c_dev *i2cd)
+{
+	writel(I2C_MST_CNTL_GEN_STOP, i2cd->regs + I2C_MST_CNTL);
+	return gpu_i2c_check_status(i2cd);
+}
+
+static int gpu_i2c_write(struct gpu_i2c_dev *i2cd, u8 data)
+{
+	u32 val;
+
+	writel(data, i2cd->regs + I2C_MST_DATA);
+
+	val = I2C_MST_CNTL_CMD_WRITE | (1 << I2C_MST_CNTL_BURST_SIZE_SHIFT);
+	writel(val, i2cd->regs + I2C_MST_CNTL);
+
+	return gpu_i2c_check_status(i2cd);
+}
+
+static int gpu_i2c_master_xfer(struct i2c_adapter *adap,
+			       struct i2c_msg *msgs, int num)
+{
+	struct gpu_i2c_dev *i2cd = i2c_get_adapdata(adap);
+	int status, status2;
+	int i, j;
+
+	/*
+	 * The controller supports maximum 4 byte read due to known
+	 * limitation of sending STOP after every read.
+	 */
+	for (i = 0; i < num; i++) {
+		if (msgs[i].flags & I2C_M_RD) {
+			/* program client address before starting read */
+			writel(msgs[i].addr, i2cd->regs + I2C_MST_ADDR);
+			/* gpu_i2c_read has implicit start */
+			status = gpu_i2c_read(i2cd, msgs[i].buf, msgs[i].len);
+			if (status < 0)
+				goto stop;
+		} else {
+			u8 addr = i2c_8bit_addr_from_msg(msgs + i);
+
+			status = gpu_i2c_start(i2cd);
+			if (status < 0) {
+				if (i == 0)
+					return status;
+				goto stop;
+			}
+
+			status = gpu_i2c_write(i2cd, addr);
+			if (status < 0)
+				goto stop;
+
+			for (j = 0; j < msgs[i].len; j++) {
+				status = gpu_i2c_write(i2cd, msgs[i].buf[j]);
+				if (status < 0)
+					goto stop;
+			}
+		}
+	}
+	status = gpu_i2c_stop(i2cd);
+	if (status < 0)
+		return status;
+
+	return i;
+stop:
+	status2 = gpu_i2c_stop(i2cd);
+	if (status2 < 0)
+		dev_err(i2cd->dev, "i2c stop failed %d\n", status2);
+	return status;
+}
+
+static const struct i2c_adapter_quirks gpu_i2c_quirks = {
+	.max_read_len = 4,
+	.flags = I2C_AQ_COMB_WRITE_THEN_READ,
+};
+
+static u32 gpu_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm gpu_i2c_algorithm = {
+	.master_xfer	= gpu_i2c_master_xfer,
+	.functionality	= gpu_i2c_functionality,
+};
+
+/*
+ * This driver is for Nvidia GPU cards with USB Type-C interface.
+ * We want to identify the cards using vendor ID and class code only
+ * to avoid dependency of adding product id for any new card which
+ * requires this driver.
+ * Currently there is no class code defined for UCSI device over PCI
+ * so using UNKNOWN class for now and it will be updated when UCSI
+ * over PCI gets a class code.
+ * There is no other NVIDIA cards with UNKNOWN class code. Even if the
+ * driver gets loaded for an undesired card then eventually i2c_read()
+ * (initiated from UCSI i2c_client) will timeout or UCSI commands will
+ * timeout.
+ */
+#define PCI_CLASS_SERIAL_UNKNOWN	0x0c80
+static const struct pci_device_id gpu_i2c_ids[] = {
+	{ PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
+		PCI_CLASS_SERIAL_UNKNOWN << 8, 0xffffff00},
+	{ }
+};
+MODULE_DEVICE_TABLE(pci, gpu_i2c_ids);
+
+static int gpu_populate_client(struct gpu_i2c_dev *i2cd, int irq)
+{
+	struct i2c_client *ccgx_client;
+
+	i2cd->gpu_ccgx_ucsi = devm_kzalloc(i2cd->dev,
+					   sizeof(*i2cd->gpu_ccgx_ucsi),
+					   GFP_KERNEL);
+	if (!i2cd->gpu_ccgx_ucsi)
+		return -ENOMEM;
+
+	strlcpy(i2cd->gpu_ccgx_ucsi->type, "ccgx-ucsi",
+		sizeof(i2cd->gpu_ccgx_ucsi->type));
+	i2cd->gpu_ccgx_ucsi->addr = 0x8;
+	i2cd->gpu_ccgx_ucsi->irq = irq;
+	ccgx_client = i2c_new_device(&i2cd->adapter, i2cd->gpu_ccgx_ucsi);
+	if (!ccgx_client)
+		return -ENODEV;
+
+	return 0;
+}
+
+static int gpu_i2c_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct gpu_i2c_dev *i2cd;
+	int status;
+
+	i2cd = devm_kzalloc(&pdev->dev, sizeof(*i2cd), GFP_KERNEL);
+	if (!i2cd)
+		return -ENOMEM;
+
+	i2cd->dev = &pdev->dev;
+	dev_set_drvdata(&pdev->dev, i2cd);
+
+	status = pcim_enable_device(pdev);
+	if (status < 0) {
+		dev_err(&pdev->dev, "pcim_enable_device failed %d\n", status);
+		return status;
+	}
+
+	pci_set_master(pdev);
+
+	i2cd->regs = pcim_iomap(pdev, 0, 0);
+	if (!i2cd->regs) {
+		dev_err(&pdev->dev, "pcim_iomap failed\n");
+		return -ENOMEM;
+	}
+
+	status = pci_alloc_irq_vectors(pdev, 1, 1, PCI_IRQ_MSI);
+	if (status < 0) {
+		dev_err(&pdev->dev, "pci_alloc_irq_vectors err %d\n", status);
+		return status;
+	}
+
+	gpu_enable_i2c_bus(i2cd);
+
+	i2c_set_adapdata(&i2cd->adapter, i2cd);
+	i2cd->adapter.owner = THIS_MODULE;
+	strlcpy(i2cd->adapter.name, "NVIDIA GPU I2C adapter",
+		sizeof(i2cd->adapter.name));
+	i2cd->adapter.algo = &gpu_i2c_algorithm;
+	i2cd->adapter.quirks = &gpu_i2c_quirks;
+	i2cd->adapter.dev.parent = &pdev->dev;
+	status = i2c_add_adapter(&i2cd->adapter);
+	if (status < 0)
+		goto free_irq_vectors;
+
+	status = gpu_populate_client(i2cd, pdev->irq);
+	if (status < 0) {
+		dev_err(&pdev->dev, "gpu_populate_client failed %d\n", status);
+		goto del_adapter;
+	}
+
+	return 0;
+
+del_adapter:
+	i2c_del_adapter(&i2cd->adapter);
+free_irq_vectors:
+	pci_free_irq_vectors(pdev);
+	return status;
+}
+
+static void gpu_i2c_remove(struct pci_dev *pdev)
+{
+	struct gpu_i2c_dev *i2cd = dev_get_drvdata(&pdev->dev);
+
+	i2c_del_adapter(&i2cd->adapter);
+	pci_free_irq_vectors(pdev);
+}
+
+static int gpu_i2c_resume(struct device *dev)
+{
+	struct gpu_i2c_dev *i2cd = dev_get_drvdata(dev);
+
+	gpu_enable_i2c_bus(i2cd);
+	return 0;
+}
+
+UNIVERSAL_DEV_PM_OPS(gpu_i2c_driver_pm, NULL, gpu_i2c_resume, NULL);
+
+static struct pci_driver gpu_i2c_driver = {
+	.name		= "nvidia-gpu",
+	.id_table	= gpu_i2c_ids,
+	.probe		= gpu_i2c_probe,
+	.remove		= gpu_i2c_remove,
+	.driver		= {
+		.pm	= &gpu_i2c_driver_pm,
+	},
+};
+
+module_pci_driver(gpu_i2c_driver);
+
+MODULE_AUTHOR("Ajay Gupta <ajayg@nvidia.com>");
+MODULE_DESCRIPTION("Nvidia GPU I2C controller Driver");
+MODULE_LICENSE("GPL v2");