Message ID | 20171227135054.29690-2-brgl@bgdev.pl |
---|---|
State | Superseded |
Delegated to: | Bartosz Golaszewski |
Headers | show |
Series | eeprom: at24: device tree support fixes | expand |
On Wed, Dec 27, 2017 at 7:50 AM, Bartosz Golaszewski <brgl@bgdev.pl> wrote: > Current description of the compatible property for at24 is quite vague. > > State explicitly that any "<manufacturer>,<model>" pair is accepted as > long as one of the listed strings is used as fallback. > > Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> > --- > Documentation/devicetree/bindings/eeprom/at24.txt | 37 +++++++++-------------- > 1 file changed, 15 insertions(+), 22 deletions(-) > > diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt > index cbc80e194ac6..b5ce5a247554 100644 > --- a/Documentation/devicetree/bindings/eeprom/at24.txt > +++ b/Documentation/devicetree/bindings/eeprom/at24.txt > @@ -2,28 +2,21 @@ EEPROMs (I2C) > > Required properties: > > - - compatible : should be "<manufacturer>,<type>", like these: > - > - "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04", > - "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64", > - "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024" > - > - "catalyst,24c32" > - > - "microchip,24c128" > - > - "ramtron,24c64" > - > - "renesas,r1ex24002" Keep this and any others that don't have an atmel model. This should probably also state what the fallback should be (atmel,24c02 ?). > - > - The following manufacturers values have been deprecated: > - "at", "at24" > - > - If there is no specific driver for <manufacturer>, a generic > - device with <type> and manufacturer "atmel" should be used. > - Possible types are: > - "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64", > - "24c128", "24c256", "24c512", "24c1024", "spd" You remove "spd" here and add it back later. Just fold that in below. I'll leave it to others to bikeshed where in the list. > + - compatible: must be a "<manufacturer>,<model>" pair with one of the We should enumerate known vendors/manufacturers because something like "linaro,24c00" is not valid. > + following values as fallback: > + > + "atmel,24c00", > + "atmel,24c01", > + "atmel,24c02", > + "atmel,24c04", > + "atmel,24c08", > + "atmel,24c16", > + "atmel,24c32", > + "atmel,24c64", > + "atmel,24c128", > + "atmel,24c256", > + "atmel,24c512", > + "atmel,24c1024" > > - reg : the I2C address of the EEPROM > > -- > 2.15.1 >
On Wed, Dec 27, 2017 at 7:50 AM, Bartosz Golaszewski <brgl@bgdev.pl> wrote: > Current description of the compatible property for at24 is quite vague. > > State explicitly that any "<manufacturer>,<model>" pair is accepted as > long as one of the listed strings is used as fallback. > > Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> > --- > Documentation/devicetree/bindings/eeprom/at24.txt | 37 +++++++++-------------- > 1 file changed, 15 insertions(+), 22 deletions(-) > > diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt > index cbc80e194ac6..b5ce5a247554 100644 > --- a/Documentation/devicetree/bindings/eeprom/at24.txt > +++ b/Documentation/devicetree/bindings/eeprom/at24.txt > @@ -2,28 +2,21 @@ EEPROMs (I2C) > > Required properties: > > - - compatible : should be "<manufacturer>,<type>", like these: > - > - "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04", > - "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64", > - "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024" > - > - "catalyst,24c32" > - > - "microchip,24c128" > - > - "ramtron,24c64" > - > - "renesas,r1ex24002" > - > - The following manufacturers values have been deprecated: > - "at", "at24" > - > - If there is no specific driver for <manufacturer>, a generic > - device with <type> and manufacturer "atmel" should be used. > - Possible types are: > - "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64", > - "24c128", "24c256", "24c512", "24c1024", "spd" > + - compatible: must be a "<manufacturer>,<model>" pair with one of the Also, why do you add "must" here and then fix it with "Must" in patch 3? Just get it right here. Rob
On 2017-12-27 14:50, Bartosz Golaszewski wrote: > Current description of the compatible property for at24 is quite vague. > > State explicitly that any "<manufacturer>,<model>" pair is accepted as > long as one of the listed strings is used as fallback. > > Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> > --- > Documentation/devicetree/bindings/eeprom/at24.txt | 37 +++++++++-------------- > 1 file changed, 15 insertions(+), 22 deletions(-) > > diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt > index cbc80e194ac6..b5ce5a247554 100644 > --- a/Documentation/devicetree/bindings/eeprom/at24.txt > +++ b/Documentation/devicetree/bindings/eeprom/at24.txt > @@ -2,28 +2,21 @@ EEPROMs (I2C) > > Required properties: > > - - compatible : should be "<manufacturer>,<type>", like these: > - > - "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04", > - "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64", > - "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024" > - > - "catalyst,24c32" > - > - "microchip,24c128" > - > - "ramtron,24c64" > - > - "renesas,r1ex24002" > - > - The following manufacturers values have been deprecated: > - "at", "at24" > - > - If there is no specific driver for <manufacturer>, a generic > - device with <type> and manufacturer "atmel" should be used. > - Possible types are: > - "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64", > - "24c128", "24c256", "24c512", "24c1024", "spd" > + - compatible: must be a "<manufacturer>,<model>" pair with one of the > + following values as fallback: > + > + "atmel,24c00", > + "atmel,24c01", I read the above as if it is no longer allowed to have a plain old atmel chip, since the atmel compatibles are now valid as fallbacks /only/. I don't think that's what you intended? Cheers, Peter > + "atmel,24c02", > + "atmel,24c04", > + "atmel,24c08", > + "atmel,24c16", > + "atmel,24c32", > + "atmel,24c64", > + "atmel,24c128", > + "atmel,24c256", > + "atmel,24c512", > + "atmel,24c1024" > > - reg : the I2C address of the EEPROM > >
diff --git a/Documentation/devicetree/bindings/eeprom/at24.txt b/Documentation/devicetree/bindings/eeprom/at24.txt index cbc80e194ac6..b5ce5a247554 100644 --- a/Documentation/devicetree/bindings/eeprom/at24.txt +++ b/Documentation/devicetree/bindings/eeprom/at24.txt @@ -2,28 +2,21 @@ EEPROMs (I2C) Required properties: - - compatible : should be "<manufacturer>,<type>", like these: - - "atmel,24c00", "atmel,24c01", "atmel,24c02", "atmel,24c04", - "atmel,24c08", "atmel,24c16", "atmel,24c32", "atmel,24c64", - "atmel,24c128", "atmel,24c256", "atmel,24c512", "atmel,24c1024" - - "catalyst,24c32" - - "microchip,24c128" - - "ramtron,24c64" - - "renesas,r1ex24002" - - The following manufacturers values have been deprecated: - "at", "at24" - - If there is no specific driver for <manufacturer>, a generic - device with <type> and manufacturer "atmel" should be used. - Possible types are: - "24c00", "24c01", "24c02", "24c04", "24c08", "24c16", "24c32", "24c64", - "24c128", "24c256", "24c512", "24c1024", "spd" + - compatible: must be a "<manufacturer>,<model>" pair with one of the + following values as fallback: + + "atmel,24c00", + "atmel,24c01", + "atmel,24c02", + "atmel,24c04", + "atmel,24c08", + "atmel,24c16", + "atmel,24c32", + "atmel,24c64", + "atmel,24c128", + "atmel,24c256", + "atmel,24c512", + "atmel,24c1024" - reg : the I2C address of the EEPROM
Current description of the compatible property for at24 is quite vague. State explicitly that any "<manufacturer>,<model>" pair is accepted as long as one of the listed strings is used as fallback. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> --- Documentation/devicetree/bindings/eeprom/at24.txt | 37 +++++++++-------------- 1 file changed, 15 insertions(+), 22 deletions(-)