i2c: i2c-stm32f7: report dma error during probe

Distinguish between the case where dma information is not provided
within the DT and the case of an error during the dma init.
Exit the probe with error in case of an error during dma init.

Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")

Signed-off-by: Alain Volmat <alain.volmat@st.com>
---
 drivers/i2c/busses/i2c-stm32.c   | 16 ++++++++--------
 drivers/i2c/busses/i2c-stm32f7.c |  9 +++++++++
 2 files changed, 17 insertions(+), 8 deletions(-)

Hi

Looks good for me

Reviewed-by: Pierre-Yves MORDRET <pierre-yves.mordret@st.com>

Regards

On 10/24/19 2:52 PM, Alain Volmat wrote:
> Distinguish between the case where dma information is not provided
> within the DT and the case of an error during the dma init.
> Exit the probe with error in case of an error during dma init.
> 
> Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
> 
> Signed-off-by: Alain Volmat <alain.volmat@st.com>
> ---
>  drivers/i2c/busses/i2c-stm32.c   | 16 ++++++++--------
>  drivers/i2c/busses/i2c-stm32f7.c |  9 +++++++++
>  2 files changed, 17 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/i2c/busses/i2c-stm32.c b/drivers/i2c/busses/i2c-stm32.c
> index 07d5dfce68d4..1da347e6a358 100644
> --- a/drivers/i2c/busses/i2c-stm32.c
> +++ b/drivers/i2c/busses/i2c-stm32.c
> @@ -20,13 +20,13 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
>  
>  	dma = devm_kzalloc(dev, sizeof(*dma), GFP_KERNEL);
>  	if (!dma)
> -		return NULL;
> +		return ERR_PTR(-ENOMEM);
>  
>  	/* Request and configure I2C TX dma channel */
> -	dma->chan_tx = dma_request_slave_channel(dev, "tx");
> -	if (!dma->chan_tx) {
> +	dma->chan_tx = dma_request_chan(dev, "tx");
> +	if (IS_ERR(dma->chan_tx)) {
>  		dev_dbg(dev, "can't request DMA tx channel\n");
> -		ret = -EINVAL;
> +		ret = PTR_ERR(dma->chan_tx);
>  		goto fail_al;
>  	}
>  
> @@ -42,10 +42,10 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
>  	}
>  
>  	/* Request and configure I2C RX dma channel */
> -	dma->chan_rx = dma_request_slave_channel(dev, "rx");
> -	if (!dma->chan_rx) {
> +	dma->chan_rx = dma_request_chan(dev, "rx");
> +	if (IS_ERR(dma->chan_rx)) {
>  		dev_err(dev, "can't request DMA rx channel\n");
> -		ret = -EINVAL;
> +		ret = PTR_ERR(dma->chan_rx);
>  		goto fail_tx;
>  	}
>  
> @@ -75,7 +75,7 @@ struct stm32_i2c_dma *stm32_i2c_dma_request(struct device *dev,
>  	devm_kfree(dev, dma);
>  	dev_info(dev, "can't use DMA\n");
>  
> -	return NULL;
> +	return ERR_PTR(ret);
>  }
>  
>  void stm32_i2c_dma_free(struct stm32_i2c_dma *dma)
> diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
> index d36cf08461f7..cc8ba8f49ae6 100644
> --- a/drivers/i2c/busses/i2c-stm32f7.c
> +++ b/drivers/i2c/busses/i2c-stm32f7.c
> @@ -1950,6 +1950,15 @@ static int stm32f7_i2c_probe(struct platform_device *pdev)
>  	i2c_dev->dma = stm32_i2c_dma_request(i2c_dev->dev, phy_addr,
>  					     STM32F7_I2C_TXDR,
>  					     STM32F7_I2C_RXDR);
> +	if (PTR_ERR(i2c_dev->dma) == -ENODEV)
> +		i2c_dev->dma = NULL;
> +	else if (IS_ERR(i2c_dev->dma)) {
> +		ret = PTR_ERR(i2c_dev->dma);
> +		if (ret != -EPROBE_DEFER)
> +			dev_err(&pdev->dev,
> +				"Failed to request dma error %i\n", ret);
> +		goto clk_free;
> +	}
>  
>  	platform_set_drvdata(pdev, i2c_dev);
>  
>

On Thu, Oct 24, 2019 at 02:52:00PM +0200, Alain Volmat wrote:
> Distinguish between the case where dma information is not provided
> within the DT and the case of an error during the dma init.
> Exit the probe with error in case of an error during dma init.
> 
> Fixes: bb8822cbbc53 ("i2c: i2c-stm32: Add generic DMA API")
> 
> Signed-off-by: Alain Volmat <alain.volmat@st.com>

Applied to for-next, thanks!