| Message ID | 1425903665-19343-1-git-send-email-sebastian.hesselbarth@gmail.com |
|---|---|
| State | Deferred |
| Headers | show |
On 03/09/2015 06:21 AM, Sebastian Hesselbarth wrote: > I2C mux pinctrl driver currently determines the number of sub-busses by > counting available pinctrl-names. Unfortunately, this requires each > incarnation of the devicetree node with different available sub-busses > to be rewritten. > > This patch reworks i2c-mux-pinctrl driver to count the number of > available sub-nodes instead. The rework should be compatible to the old > way of probing for sub-busses and additionally allows to disable unused > sub-busses with standard DT property status = "disabled". > > This also amends the corresponding devicetree binding documentation to > reflect the new functionality to disable unused sub-nodes. While at it, > also fix two references to binding documentation files that miss an "i2c-" > prefix. The DT binding changes at least, Acked-by: Stephen Warren <swarren@nvidia.com> -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 10.03.2015 17:28, Stephen Warren wrote: > On 03/09/2015 06:21 AM, Sebastian Hesselbarth wrote: >> I2C mux pinctrl driver currently determines the number of sub-busses by >> counting available pinctrl-names. Unfortunately, this requires each >> incarnation of the devicetree node with different available sub-busses >> to be rewritten. >> >> This patch reworks i2c-mux-pinctrl driver to count the number of >> available sub-nodes instead. The rework should be compatible to the old >> way of probing for sub-busses and additionally allows to disable unused >> sub-busses with standard DT property status = "disabled". >> >> This also amends the corresponding devicetree binding documentation to >> reflect the new functionality to disable unused sub-nodes. While at it, >> also fix two references to binding documentation files that miss an >> "i2c-" >> prefix. > > The DT binding changes at least, > Acked-by: Stephen Warren <swarren@nvidia.com> Wolfram, are you going to pick this patch through your tree now that Stephen ack'ed the binding documentation change, too? I can also split the patch up into driver/doc changes if you prefer. Sebastian -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Mon, Mar 09, 2015 at 01:21:05PM +0100, Sebastian Hesselbarth wrote: > I2C mux pinctrl driver currently determines the number of sub-busses by > counting available pinctrl-names. Unfortunately, this requires each > incarnation of the devicetree node with different available sub-busses > to be rewritten. > > This patch reworks i2c-mux-pinctrl driver to count the number of > available sub-nodes instead. The rework should be compatible to the old > way of probing for sub-busses and additionally allows to disable unused > sub-busses with standard DT property status = "disabled". Not sure about this change. With DYNAMIC_OF these days, you can't rely that 'disabled' stays disabled all the time. My gut feeling tells me that people will want to use this someday. > > This also amends the corresponding devicetree binding documentation to > reflect the new functionality to disable unused sub-nodes. While at it, > also fix two references to binding documentation files that miss an "i2c-" > prefix. > > Signed-off-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> > Tested-by: Stephen Warren <swarren@nvidia.com> > --- > Changelog: > > v2->v3: > - remove mention of "I2C bus numbers" (Suggested by Stephen Warren) > - require pinctrl-names property for "each child" instead of > "each enabled child" (Suggested by Stephen Warren) > - swap enabled/disabled child nodes (Suggested by Stephen Warren) > > v1->v2: > - added a Tested-by for i2c-mux-pinctrl changes from Stepen Warren. > - reworded i2c-mux-pinctrl devicetree doc changes > (Suggested by Stephen Warren). > > Patches 2/4 - 4/4 remain unchanged. > > Cc: Jason Cooper <jason@lakedaemon.net> > Cc: Andrew Lunn <andrew@lunn.ch> > Cc: Gregory Clement <gregory.clement@free-electrons.com> > Cc: Gabriel Dobato <dobatog@gmail.com> > Cc: Wolfram Sang <wsa@the-dreams.de> > Cc: Stephen Warren <swarren@wwwdotorg.org> > Cc: linux-i2c@vger.kernel.org > Cc: devicetree@vger.kernel.org > Cc: linux-arm-kernel@lists.infradead.org > Cc: linux-kernel@vger.kernel.org > --- > .../devicetree/bindings/i2c/i2c-mux-pinctrl.txt | 21 ++++--- > drivers/i2c/muxes/i2c-mux-pinctrl.c | 70 ++++++++++++++-------- > 2 files changed, 58 insertions(+), 33 deletions(-) > > diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt > index ae8af1694e95..cd94a0f64d76 100644 > --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt > +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt > @@ -28,17 +28,18 @@ Also required are: > * Standard pinctrl properties that specify the pin mux state for each child > bus. See ../pinctrl/pinctrl-bindings.txt. > > -* Standard I2C mux properties. See mux.txt in this directory. > +* Standard I2C mux properties. See i2c-mux.txt in this directory. > > -* I2C child bus nodes. See mux.txt in this directory. > +* I2C child bus nodes. See i2c-mux.txt in this directory. > > -For each named state defined in the pinctrl-names property, an I2C child bus > -will be created. I2C child bus numbers are assigned based on the index into > -the pinctrl-names property. > +For each enabled child node an I2C child bus will be created. > > -The only exception is that no bus will be created for a state named "idle". If > -such a state is defined, it must be the last entry in pinctrl-names. For > -example: > +There must be a corresponding pinctrl-names entry for each child node at the > +position of the child node's "reg" property. > + > +Also, there can be an idle pinctrl state defined at the end of possible pinctrl > +states. If such a state is defined, it must be the last entry in pinctrl-names. > +For example: > > pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1 > pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last) > @@ -68,10 +69,12 @@ Example: > pinctrl-1 = <&state_i2cmux_pta>; > pinctrl-2 = <&state_i2cmux_idle>; > > + /* Disabled child bus 0 */ > i2c@0 { > reg = <0>; > #address-cells = <1>; > #size-cells = <0>; > + status = "disabled"; > > eeprom { > compatible = "eeprom"; > @@ -79,10 +82,12 @@ Example: > }; > }; > > + /* Enabled child bus 1 */ > i2c@1 { > reg = <1>; > #address-cells = <1>; > #size-cells = <0>; > + status = "okay"; > > eeprom { > compatible = "eeprom"; > diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c > index b48378c4b40d..033dacfabfdf 100644 > --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c > +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c > @@ -56,9 +56,12 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, > struct platform_device *pdev) > { > struct device_node *np = pdev->dev.of_node; > - int num_names, i, ret; > + struct device_node *child; > + struct property *prop; > + int num_names, num_children, ret; > struct device_node *adapter_np; > struct i2c_adapter *adapter; > + const char *state; > > if (!np) > return 0; > @@ -77,32 +80,16 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, > return num_names; > } > > - mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev, > - sizeof(*mux->pdata->pinctrl_states) * num_names, > - GFP_KERNEL); > - if (!mux->pdata->pinctrl_states) { > - dev_err(mux->dev, "Cannot allocate pinctrl_states\n"); > - return -ENOMEM; > + num_children = of_get_available_child_count(np); > + if (num_children < 0) { > + dev_err(mux->dev, "Unable to count available children: %d\n", > + num_children); > + return num_children; > } > > - for (i = 0; i < num_names; i++) { > - ret = of_property_read_string_index(np, "pinctrl-names", i, > - &mux->pdata->pinctrl_states[mux->pdata->bus_count]); > - if (ret < 0) { > - dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n", > - ret); > - return ret; > - } > - if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count], > - "idle")) { > - if (i != num_names - 1) { > - dev_err(mux->dev, "idle state must be last\n"); > - return -EINVAL; > - } > - mux->pdata->pinctrl_state_idle = "idle"; > - } else { > - mux->pdata->bus_count++; > - } > + if (num_names < num_children) { > + dev_err(mux->dev, "Found less pinctrl states than children\n"); > + return -EINVAL; > } > > adapter_np = of_parse_phandle(np, "i2c-parent", 0); > @@ -118,6 +105,39 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, > mux->pdata->parent_bus_num = i2c_adapter_id(adapter); > put_device(&adapter->dev); > > + mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev, > + sizeof(*mux->pdata->pinctrl_states) * num_children, > + GFP_KERNEL); > + if (!mux->pdata->pinctrl_states) { > + dev_err(mux->dev, "Cannot allocate pinctrl_states\n"); > + return -ENOMEM; > + } > + > + of_property_for_each_string(np, "pinctrl-names", prop, state) > + if (!strcmp(state, "idle")) > + mux->pdata->pinctrl_state_idle = "idle"; > + > + for_each_available_child_of_node(np, child) { > + u32 reg; > + > + ret = of_property_read_u32(child, "reg", ®); > + if (ret < 0) { > + dev_err(mux->dev, "Missing reg property for child node: %d\n", > + ret); > + return ret; > + } > + > + ret = of_property_read_string_index(np, > + "pinctrl-names", reg, &state); > + if (ret < 0) { > + dev_err(mux->dev, "Cannot parse pinctrl-names for mux %d: %d\n", > + reg, ret); > + return ret; > + } > + > + mux->pdata->pinctrl_states[mux->pdata->bus_count++] = state; > + } > + > return 0; > } > #else > -- > 2.1.0 >
On 18.03.2015 13:30, Wolfram Sang wrote: > On Mon, Mar 09, 2015 at 01:21:05PM +0100, Sebastian Hesselbarth wrote: >> I2C mux pinctrl driver currently determines the number of sub-busses by >> counting available pinctrl-names. Unfortunately, this requires each >> incarnation of the devicetree node with different available sub-busses >> to be rewritten. >> >> This patch reworks i2c-mux-pinctrl driver to count the number of >> available sub-nodes instead. The rework should be compatible to the old >> way of probing for sub-busses and additionally allows to disable unused >> sub-busses with standard DT property status = "disabled". > > Not sure about this change. With DYNAMIC_OF these days, you can't rely > that 'disabled' stays disabled all the time. My gut feeling tells me > that people will want to use this someday. Possible. But this change just makes i2c-mux-pinctrl honor status property at all. There is no functional change except it now allows you to disable any of the sub-busses. I agree that this driver still does not cope well with DYNAMIC_OF but neither did the former implementation. How about we settle this driver to this implementation now and wait for any maniac that wants to use it the way you are suggesting above? The other option would be to leave the driver as is - but at least on Dove where the muxing-options are not used often, it will always create 4 i2c-busses (controller plus the three muxing options) on any board even though the pins are not accessible at all. I think that will just create massive confusion from the user point-of-view? BTW, I have received a patchwork update notification - it may be unrelated but I prefer the Dove dts/dtsi changes to go through mvebu tree. Sebastian -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Mar 18, 2015 at 02:23:18PM +0100, Sebastian Hesselbarth wrote: > On 18.03.2015 13:30, Wolfram Sang wrote: > >On Mon, Mar 09, 2015 at 01:21:05PM +0100, Sebastian Hesselbarth wrote: > >>I2C mux pinctrl driver currently determines the number of sub-busses by > >>counting available pinctrl-names. Unfortunately, this requires each > >>incarnation of the devicetree node with different available sub-busses > >>to be rewritten. > >> > >>This patch reworks i2c-mux-pinctrl driver to count the number of > >>available sub-nodes instead. The rework should be compatible to the old > >>way of probing for sub-busses and additionally allows to disable unused > >>sub-busses with standard DT property status = "disabled". > > > >Not sure about this change. With DYNAMIC_OF these days, you can't rely > >that 'disabled' stays disabled all the time. My gut feeling tells me > >that people will want to use this someday. > > Possible. But this change just makes i2c-mux-pinctrl honor status > property at all. There is no functional change except it now allows > you to disable any of the sub-busses. Actually, this is the feature I like. However, I wonder if we shouldn't have that in the core, say in of_i2c_register_devices()? > I agree that this driver still does not cope well with DYNAMIC_OF but > neither did the former implementation. How about we settle this driver > to this implementation now and wait for any maniac that wants to use it > the way you are suggesting above? Sure. I don't want you to make this driver OF_DYNAMIC compatible. I just thought it makes it harder, though, e.g. you allocate memory for the number of active busses not the number of possibilities, so that would have to be reverted by the "maniac". I am still at the glimpse level, but what if we let the mux-pinctrl parse all the data (even for disabled busses), but only the enabled ones will get a muxed adapter because this is handled in of_i2c_register_devices()? > BTW, I have received a patchwork update notification - it may be > unrelated but I prefer the Dove dts/dtsi changes to go through mvebu > tree. Yes, I only take dts patches in rare cases.
On 18.03.2015 15:00, Wolfram Sang wrote: > On Wed, Mar 18, 2015 at 02:23:18PM +0100, Sebastian Hesselbarth wrote: >> Possible. But this change just makes i2c-mux-pinctrl honor status >> property at all. There is no functional change except it now allows >> you to disable any of the sub-busses. > > Actually, this is the feature I like. However, I wonder if we shouldn't > have that in the core, say in of_i2c_register_devices()? Hmm, looking at of_i2c_register_devices(): for_each_available_child_of_node(adap->dev.of_node, node) of_i2c_register_device(adap, node); already honors status properties by using for_each_available_foo. Therefore, i2c-core will also skip i2c device nodes disabled by status property. >> I agree that this driver still does not cope well with DYNAMIC_OF but >> neither did the former implementation. How about we settle this driver >> to this implementation now and wait for any maniac that wants to use it >> the way you are suggesting above? > > Sure. I don't want you to make this driver OF_DYNAMIC compatible. I just > thought it makes it harder, though, e.g. you allocate memory for the > number of active busses not the number of possibilities, so that would > have to be reverted by the "maniac". I am still at the glimpse level, > but what if we let the mux-pinctrl parse all the data (even for disabled > busses), but only the enabled ones will get a muxed adapter because this > is handled in of_i2c_register_devices()? I am not too deep into i2c-core, but AFAIKS i2c-mux-pinctrl is not an i2c device but an i2c mux that is dealt with differently? It is not probed with of_i2c_register_devices() but as a separate platform_device with a reference to the parent i2c bus. About the memory allocation for the maximum potential number of muxes: We would need some way to distinguish disabled from enabled muxes in i2c-mux-pinctrl's platform_data. i2c_mux_pinctrl_probe() is basically DT-agnostic and it should definitely stay that way. Currently, each mux within pd->bus_count requires a non-NULL pd->pinctrl_states[i] otherwise _probe() will bail out for all sub-busses. We could rework it to (a) deal with each sub-bus individually with respect to pinctrl_lookup_state() and i2c_add_mux_adapter() and (b) allow (and skip) muxes with pinctrl_states[i] == NULL for now and let the "maniac" deal with storing/re-probing the corresponding pinctrl_state name once it gets dynamically enabled. I am still not too eager working on it but if you insist, I can see what I can do as long as Stephen sticks with testing it on Tegra. ;) Sebastian -- To unsubscribe from this list: send the line "unsubscribe linux-i2c" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt index ae8af1694e95..cd94a0f64d76 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pinctrl.txt @@ -28,17 +28,18 @@ Also required are: * Standard pinctrl properties that specify the pin mux state for each child bus. See ../pinctrl/pinctrl-bindings.txt. -* Standard I2C mux properties. See mux.txt in this directory. +* Standard I2C mux properties. See i2c-mux.txt in this directory. -* I2C child bus nodes. See mux.txt in this directory. +* I2C child bus nodes. See i2c-mux.txt in this directory. -For each named state defined in the pinctrl-names property, an I2C child bus -will be created. I2C child bus numbers are assigned based on the index into -the pinctrl-names property. +For each enabled child node an I2C child bus will be created. -The only exception is that no bus will be created for a state named "idle". If -such a state is defined, it must be the last entry in pinctrl-names. For -example: +There must be a corresponding pinctrl-names entry for each child node at the +position of the child node's "reg" property. + +Also, there can be an idle pinctrl state defined at the end of possible pinctrl +states. If such a state is defined, it must be the last entry in pinctrl-names. +For example: pinctrl-names = "ddc", "pta", "idle" -> ddc = bus 0, pta = bus 1 pinctrl-names = "ddc", "idle", "pta" -> Invalid ("idle" not last) @@ -68,10 +69,12 @@ Example: pinctrl-1 = <&state_i2cmux_pta>; pinctrl-2 = <&state_i2cmux_idle>; + /* Disabled child bus 0 */ i2c@0 { reg = <0>; #address-cells = <1>; #size-cells = <0>; + status = "disabled"; eeprom { compatible = "eeprom"; @@ -79,10 +82,12 @@ Example: }; }; + /* Enabled child bus 1 */ i2c@1 { reg = <1>; #address-cells = <1>; #size-cells = <0>; + status = "okay"; eeprom { compatible = "eeprom"; diff --git a/drivers/i2c/muxes/i2c-mux-pinctrl.c b/drivers/i2c/muxes/i2c-mux-pinctrl.c index b48378c4b40d..033dacfabfdf 100644 --- a/drivers/i2c/muxes/i2c-mux-pinctrl.c +++ b/drivers/i2c/muxes/i2c-mux-pinctrl.c @@ -56,9 +56,12 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; - int num_names, i, ret; + struct device_node *child; + struct property *prop; + int num_names, num_children, ret; struct device_node *adapter_np; struct i2c_adapter *adapter; + const char *state; if (!np) return 0; @@ -77,32 +80,16 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, return num_names; } - mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev, - sizeof(*mux->pdata->pinctrl_states) * num_names, - GFP_KERNEL); - if (!mux->pdata->pinctrl_states) { - dev_err(mux->dev, "Cannot allocate pinctrl_states\n"); - return -ENOMEM; + num_children = of_get_available_child_count(np); + if (num_children < 0) { + dev_err(mux->dev, "Unable to count available children: %d\n", + num_children); + return num_children; } - for (i = 0; i < num_names; i++) { - ret = of_property_read_string_index(np, "pinctrl-names", i, - &mux->pdata->pinctrl_states[mux->pdata->bus_count]); - if (ret < 0) { - dev_err(mux->dev, "Cannot parse pinctrl-names: %d\n", - ret); - return ret; - } - if (!strcmp(mux->pdata->pinctrl_states[mux->pdata->bus_count], - "idle")) { - if (i != num_names - 1) { - dev_err(mux->dev, "idle state must be last\n"); - return -EINVAL; - } - mux->pdata->pinctrl_state_idle = "idle"; - } else { - mux->pdata->bus_count++; - } + if (num_names < num_children) { + dev_err(mux->dev, "Found less pinctrl states than children\n"); + return -EINVAL; } adapter_np = of_parse_phandle(np, "i2c-parent", 0); @@ -118,6 +105,39 @@ static int i2c_mux_pinctrl_parse_dt(struct i2c_mux_pinctrl *mux, mux->pdata->parent_bus_num = i2c_adapter_id(adapter); put_device(&adapter->dev); + mux->pdata->pinctrl_states = devm_kzalloc(&pdev->dev, + sizeof(*mux->pdata->pinctrl_states) * num_children, + GFP_KERNEL); + if (!mux->pdata->pinctrl_states) { + dev_err(mux->dev, "Cannot allocate pinctrl_states\n"); + return -ENOMEM; + } + + of_property_for_each_string(np, "pinctrl-names", prop, state) + if (!strcmp(state, "idle")) + mux->pdata->pinctrl_state_idle = "idle"; + + for_each_available_child_of_node(np, child) { + u32 reg; + + ret = of_property_read_u32(child, "reg", ®); + if (ret < 0) { + dev_err(mux->dev, "Missing reg property for child node: %d\n", + ret); + return ret; + } + + ret = of_property_read_string_index(np, + "pinctrl-names", reg, &state); + if (ret < 0) { + dev_err(mux->dev, "Cannot parse pinctrl-names for mux %d: %d\n", + reg, ret); + return ret; + } + + mux->pdata->pinctrl_states[mux->pdata->bus_count++] = state; + } + return 0; } #else