diff mbox

[2/4] i2c-i801: Add Device IDs for Intel Sunrise Point PCH

Message ID 1413238824-5513-1-git-send-email-james.d.ralston@intel.com
State Accepted
Headers show

Commit Message

james.d.ralston@intel.com Oct. 13, 2014, 10:20 p.m. UTC
This patch adds the I2C/SMBus Device IDs for the Intel Sunrise Point PCH.

Signed-off-by: James Ralston <james.d.ralston@intel.com>
---
 Documentation/i2c/busses/i2c-i801 | 1 +
 drivers/i2c/busses/Kconfig        | 1 +
 drivers/i2c/busses/i2c-i801.c     | 3 +++
 3 files changed, 5 insertions(+)

Comments

Wolfram Sang Oct. 16, 2014, 7:16 a.m. UTC | #1
On Mon, Oct 13, 2014 at 03:20:24PM -0700, James Ralston wrote:
> This patch adds the I2C/SMBus Device IDs for the Intel Sunrise Point PCH.
> 
> Signed-off-by: James Ralston <james.d.ralston@intel.com>

Applied to for-next, thanks!
Jean Delvare Oct. 16, 2014, 9:43 a.m. UTC | #2
Hi James,

On Mon, 13 Oct 2014 15:20:24 -0700, James Ralston wrote:
> This patch adds the I2C/SMBus Device IDs for the Intel Sunrise Point PCH.
> 
> Signed-off-by: James Ralston <james.d.ralston@intel.com>
> ---
>  Documentation/i2c/busses/i2c-i801 | 1 +
>  drivers/i2c/busses/Kconfig        | 1 +
>  drivers/i2c/busses/i2c-i801.c     | 3 +++
>  3 files changed, 5 insertions(+)
> 
> diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
> index e9c803e..793c83d 100644
> --- a/Documentation/i2c/busses/i2c-i801
> +++ b/Documentation/i2c/busses/i2c-i801
> @@ -28,6 +28,7 @@ Supported adapters:
>    * Intel Wildcat Point (PCH)
>    * Intel Wildcat Point-LP (PCH)
>    * Intel BayTrail (SOC)
> +  * Intel Sunrise Point-H (PCH)
>     Datasheets: Publicly available at the Intel website
>  
>  On Intel Patsburg and later chipsets, both the normal host SMBus controller
> diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
> index 2ac87fa..9f4f574 100644
> --- a/drivers/i2c/busses/Kconfig
> +++ b/drivers/i2c/busses/Kconfig
> @@ -112,6 +112,7 @@ config I2C_I801
>  	    Wildcat Point (PCH)
>  	    Wildcat Point-LP (PCH)
>  	    BayTrail (SOC)
> +	    Sunrise Point-H (PCH)
>  
>  	  This driver can also be built as a module.  If so, the module
>  	  will be called i2c-i801.
> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
> index 10467a3..7cfc183 100644
> --- a/drivers/i2c/busses/i2c-i801.c
> +++ b/drivers/i2c/busses/i2c-i801.c
> @@ -62,6 +62,7 @@
>   * Wildcat Point (PCH)		0x8ca2	32	hard	yes	yes	yes
>   * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
>   * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
> + * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes

checkpatch is unhappy:

WARNING: please, no space before tabs
#93: FILE: drivers/i2c/busses/i2c-i801.c:65:
+ * Sunrise Point-H (PCH) ^I0xa123  32^Ihard^Iyes^Iyes^Iyes$

>   *
>   * Features supported by this driver:
>   * Software PEC				no
> @@ -184,6 +185,7 @@
>  #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2		0x8d7f
>  #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
>  #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
> +#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
>  
>  struct i801_mux_config {
>  	char *gpio_chip;
> @@ -830,6 +832,7 @@ static const struct pci_device_id i801_ids[] = {
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
>  	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
> +	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
>  	{ 0, }
>  };
>  

Other than that, patch looks good, thanks.

Reviewed-by: Jean Delvare <jdelvare@suse.de>
diff mbox

Patch

diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index e9c803e..793c83d 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -28,6 +28,7 @@  Supported adapters:
   * Intel Wildcat Point (PCH)
   * Intel Wildcat Point-LP (PCH)
   * Intel BayTrail (SOC)
+  * Intel Sunrise Point-H (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 2ac87fa..9f4f574 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -112,6 +112,7 @@  config I2C_I801
 	    Wildcat Point (PCH)
 	    Wildcat Point-LP (PCH)
 	    BayTrail (SOC)
+	    Sunrise Point-H (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 10467a3..7cfc183 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -62,6 +62,7 @@ 
  * Wildcat Point (PCH)		0x8ca2	32	hard	yes	yes	yes
  * Wildcat Point-LP (PCH)	0x9ca2	32	hard	yes	yes	yes
  * BayTrail (SOC)		0x0f12	32	hard	yes	yes	yes
+ * Sunrise Point-H (PCH) 	0xa123  32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -184,6 +185,7 @@ 
 #define PCI_DEVICE_ID_INTEL_WELLSBURG_SMBUS_MS2		0x8d7f
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
+#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -830,6 +832,7 @@  static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BAYTRAIL_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BRASWELL_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS) },
 	{ 0, }
 };