@@ -101,6 +101,11 @@ enum {
#define ID_ARBLOST (1 << 3)
#define ID_NACK (1 << 4)
+enum rcar_i2c_type {
+ I2C_RCAR_H1,
+ I2C_RCAR_H2,
+};
+
struct rcar_i2c_priv {
void __iomem *io;
struct i2c_adapter adap;
@@ -113,6 +118,7 @@ struct rcar_i2c_priv {
int irq;
u32 icccr;
u32 flags;
+ enum rcar_i2c_type devtype;
};
#define rcar_i2c_priv_to_dev(p) ((p)->adap.dev.parent)
@@ -224,12 +230,23 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
u32 scgd, cdf;
u32 round, ick;
u32 scl;
+ u32 cdf_width;
if (!clkp) {
dev_err(dev, "there is no peripheral_clk\n");
return -EIO;
}
+ switch (priv->devtype) {
+ default:
+ case I2C_RCAR_H1:
+ cdf_width = 2;
+ break;
+ case I2C_RCAR_H2:
+ cdf_width = 3;
+ break;
+ }
+
/*
* calculate SCL clock
* see
@@ -245,7 +262,7 @@ static int rcar_i2c_clock_calculate(struct rcar_i2c_priv *priv,
* clkp : peripheral_clk
* F[] : integer up-valuation
*/
- for (cdf = 0; cdf < 4; cdf++) {
+ for (cdf = 0; cdf < (1 << cdf_width); cdf++) {
ick = clk_get_rate(clkp) / (1 + cdf);
if (ick < 20000000)
goto ick_find;
@@ -287,7 +304,7 @@ scgd_find:
/*
* keep icccr value
*/
- priv->icccr = (scgd << 2 | cdf);
+ priv->icccr = (scgd << (cdf_width) | cdf);
return 0;
}
@@ -632,6 +649,13 @@ static int rcar_i2c_probe(struct platform_device *pdev)
bus_speed = 100000; /* default 100 kHz */
if (pdata && pdata->bus_speed)
bus_speed = pdata->bus_speed;
+
+ if (!pdev->id_entry) {
+ dev_err(&pdev->dev, "no entry\n");
+ return -ENODEV;
+ }
+ priv->devtype = pdev->id_entry->driver_data;
+
ret = rcar_i2c_clock_calculate(priv, bus_speed, dev);
if (ret < 0)
return ret;
@@ -686,6 +710,14 @@ static int rcar_i2c_remove(struct platform_device *pdev)
return 0;
}
+static struct platform_device_id rcar_i2c_id_table[] = {
+ { "i2c-rcar", I2C_RCAR_H1 },
+ { "i2c-rcar_h1", I2C_RCAR_H1 },
+ { "i2c-rcar_h2", I2C_RCAR_H2},
+ {},
+};
+MODULE_DEVICE_TABLE(platform, rcar_i2c_id_table);
+
static struct platform_driver rcar_i2c_driver = {
.driver = {
.name = "i2c-rcar",
@@ -693,6 +725,7 @@ static struct platform_driver rcar_i2c_driver = {
},
.probe = rcar_i2c_probe,
.remove = rcar_i2c_remove,
+ .id_table = rcar_i2c_id_table,
};
module_platform_driver(rcar_i2c_driver);
This patch modify I2C driver of rcar-H1 to usable on both rcar-H1 and rcar-H2. Signed-off-by: Nguyen Viet Dung <nv-dung@jinso.co.jp> --- drivers/i2c/busses/i2c-rcar.c | 37 +++++++++++++++++++++++++++++++++++-- 1 file changed, 35 insertions(+), 2 deletions(-)