mbox series

[v4,0/4] Enable stmpe811 touch screen on stm32f429-disco board

Message ID 1591709203-12106-1-git-send-email-dillon.minfei@gmail.com
Headers show
Series Enable stmpe811 touch screen on stm32f429-disco board | expand

Message

dillon min June 9, 2020, 1:26 p.m. UTC
From: dillon min <dillon.minfei@gmail.com>

This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
board with three dts and one i2c driver changes.

has been validated by ts_print tool

Changes log:
V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot

V3: just add change log in [PATCH V3 3/4] below ---

V2: remove id, blocks, irq-trigger from stmpe811 dts

V1:
ARM: dts: stm32: add I2C3 support on STM32F429 SoC
ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
ARM: dts: stm32: enable stmpe811 on stm32429-disco board
i2c: stm32f4: Fix stmpe811 get xyz data timeout issue

dillon min (4):
  ARM: dts: stm32: add I2C3 support on STM32F429 SoC
  ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
  ARM: dts: stm32: enable stmpe811 on stm32429-disco board
  i2c: stm32f4: Fix stmpe811 get xyz data timeout issue

 arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
 arch/arm/boot/dts/stm32f429-disco.dts  | 47 ++++++++++++++++++++++++++++++++++
 arch/arm/boot/dts/stm32f429.dtsi       | 12 +++++++++
 drivers/i2c/busses/i2c-stm32f4.c       | 12 ++++++---
 4 files changed, 80 insertions(+), 3 deletions(-)

Comments

Alexandre Torgue June 15, 2020, 9:08 a.m. UTC | #1
Hi Dillon

On 6/9/20 3:26 PM, dillon.minfei@gmail.com wrote:
> From: dillon min <dillon.minfei@gmail.com>
> 
> This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
> board with three dts and one i2c driver changes.
> 
> has been validated by ts_print tool
> 
> Changes log:
> V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
> 
> V3: just add change log in [PATCH V3 3/4] below ---
> 
> V2: remove id, blocks, irq-trigger from stmpe811 dts
> 
> V1:
> ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> 
> dillon min (4):
>    ARM: dts: stm32: add I2C3 support on STM32F429 SoC
>    ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
>    ARM: dts: stm32: enable stmpe811 on stm32429-disco board
>    i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> 
>   arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
>   arch/arm/boot/dts/stm32f429-disco.dts  | 47 ++++++++++++++++++++++++++++++++++
>   arch/arm/boot/dts/stm32f429.dtsi       | 12 +++++++++
>   drivers/i2c/busses/i2c-stm32f4.c       | 12 ++++++---
>   4 files changed, 80 insertions(+), 3 deletions(-)
> 

DT patches applied on stm32-next. I changed node ordering in patch 3.

Thanks
Alex
dillon min June 15, 2020, 10:06 a.m. UTC | #2
On Mon, Jun 15, 2020 at 5:08 PM Alexandre Torgue
<alexandre.torgue@st.com> wrote:
>
> Hi Dillon
>
> On 6/9/20 3:26 PM, dillon.minfei@gmail.com wrote:
> > From: dillon min <dillon.minfei@gmail.com>
> >
> > This patchset is intend to enable stmpe811 touch screen on stm32f429-disco
> > board with three dts and one i2c driver changes.
> >
> > has been validated by ts_print tool
> >
> > Changes log:
> > V4: indroduce 'IIC_LAST_BYTE_POS' to compatible with xipkernel boot
> >
> > V3: just add change log in [PATCH V3 3/4] below ---
> >
> > V2: remove id, blocks, irq-trigger from stmpe811 dts
> >
> > V1:
> > ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> > ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> > ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> > i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> >
> > dillon min (4):
> >    ARM: dts: stm32: add I2C3 support on STM32F429 SoC
> >    ARM: dts: stm32: Add pin map for I2C3 controller on stm32f4
> >    ARM: dts: stm32: enable stmpe811 on stm32429-disco board
> >    i2c: stm32f4: Fix stmpe811 get xyz data timeout issue
> >
> >   arch/arm/boot/dts/stm32f4-pinctrl.dtsi | 12 +++++++++
> >   arch/arm/boot/dts/stm32f429-disco.dts  | 47 ++++++++++++++++++++++++++++++++++
> >   arch/arm/boot/dts/stm32f429.dtsi       | 12 +++++++++
> >   drivers/i2c/busses/i2c-stm32f4.c       | 12 ++++++---
> >   4 files changed, 80 insertions(+), 3 deletions(-)
> >
>
> DT patches applied on stm32-next. I changed node ordering in patch 3.
Okay, thanks.

Regards,
Dillon,
>
> Thanks
> Alex