Message ID | ab68df6b056a3b381d1d53cf1502e814812c4f96.1686045675.git.geert+renesas@glider.be |
---|---|
State | New |
Headers | show |
Series | dt-bindings: gpio: gpio-delay: Spelling s/curcuit/circuit/ | expand |
Hi Geert, thanks for the fix. Am Dienstag, 6. Juni 2023, 12:01:40 CEST schrieb Geert Uytterhoeven: > Fix misspellings of "circuit". > > Fixes: c7239a3da1628767 ("dt-bindings: gpio: Add gpio-delay binding > document") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com> > --- > Documentation/devicetree/bindings/gpio/gpio-delay.yaml | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml > b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml index > 7c16a4e1a768ef72..1cebc4058e272660 100644 > --- a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml > +++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml > @@ -11,7 +11,7 @@ maintainers: > > description: | > This binding describes an electrical setup where setting an GPIO output > - is delayed by some external setup, e.g. RC curcuit. > + is delayed by some external setup, e.g. RC circuit. > > +----------+ +-----------+ > > | | VCC_B | | > > @@ -30,7 +30,7 @@ description: | > GND > > If the input on the consumer is controlled by an open-drain signal > - attached to an RC curcuit the ramp-up delay is not under control > + attached to an RC circuit the ramp-up delay is not under control > of the GPIO controller. > > properties:
On 06/06/2023 12:01, Geert Uytterhoeven wrote: > Fix misspellings of "circuit". > > Fixes: c7239a3da1628767 ("dt-bindings: gpio: Add gpio-delay binding document") > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Tue, Jun 6, 2023 at 12:01 PM Geert Uytterhoeven <geert+renesas@glider.be> wrote: > > Fix misspellings of "circuit". > > Fixes: c7239a3da1628767 ("dt-bindings: gpio: Add gpio-delay binding document") > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > Documentation/devicetree/bindings/gpio/gpio-delay.yaml | 4 ++-- > 1 file changed, 2 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml > index 7c16a4e1a768ef72..1cebc4058e272660 100644 > --- a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml > +++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml > @@ -11,7 +11,7 @@ maintainers: > > description: | > This binding describes an electrical setup where setting an GPIO output > - is delayed by some external setup, e.g. RC curcuit. > + is delayed by some external setup, e.g. RC circuit. > > +----------+ +-----------+ > | | VCC_B | | > @@ -30,7 +30,7 @@ description: | > GND > > If the input on the consumer is controlled by an open-drain signal > - attached to an RC curcuit the ramp-up delay is not under control > + attached to an RC circuit the ramp-up delay is not under control > of the GPIO controller. > > properties: > -- > 2.34.1 > Applied, thanks! Bart
diff --git a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml index 7c16a4e1a768ef72..1cebc4058e272660 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-delay.yaml +++ b/Documentation/devicetree/bindings/gpio/gpio-delay.yaml @@ -11,7 +11,7 @@ maintainers: description: | This binding describes an electrical setup where setting an GPIO output - is delayed by some external setup, e.g. RC curcuit. + is delayed by some external setup, e.g. RC circuit. +----------+ +-----------+ | | VCC_B | | @@ -30,7 +30,7 @@ description: | GND If the input on the consumer is controlled by an open-drain signal - attached to an RC curcuit the ramp-up delay is not under control + attached to an RC circuit the ramp-up delay is not under control of the GPIO controller. properties:
Fix misspellings of "circuit". Fixes: c7239a3da1628767 ("dt-bindings: gpio: Add gpio-delay binding document") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- Documentation/devicetree/bindings/gpio/gpio-delay.yaml | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)