diff mbox series

[11/12] arm64: dts: exynos: Add Exynos9810 SoC support

Message ID 20241024-exynos9810-v1-11-ed14d0d60d08@gmail.com
State New
Headers show
Series Add support for Exynos9810 SoC and Samsung Galaxy S9 (SM-G960F) | expand

Commit Message

Markuss Broks Oct. 23, 2024, 10:36 p.m. UTC 
Exynos 9810 is an ARMv8 mobile SoC found in various Samsung devices,
such as Samsung Galaxy S9 (starlte), S9 Plus (star2lte),
Note 9 (crownlte) and perhaps others.

Add minimal support for this SoC, including basic stuff like:
- PSCI for bringing up secondary cores
- ARMv8 generic timer
- GPIO and pinctrl.

The firmware coming with the devices based on this SoC is buggy
and doesn't configure CNTFRQ_EL0, as required by spec, so it's
needed to hardcode the frequency in the timer node.

Co-authored-by: Maksym Holovach <nergzd@nergzd723.xyz>
Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
---
 arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi | 525 +++++++++++++++++++++
 arch/arm64/boot/dts/exynos/exynos9810.dtsi         | 256 ++++++++++
 2 files changed, 781 insertions(+)

Comments

Ivaylo Ivanov Oct. 24, 2024, 6:31 a.m. UTC | #1 
On 10/24/24 01:36, Markuss Broks wrote:
> Exynos 9810 is an ARMv8 mobile SoC found in various Samsung devices,
> such as Samsung Galaxy S9 (starlte), S9 Plus (star2lte),
> Note 9 (crownlte) and perhaps others.
>
> Add minimal support for this SoC, including basic stuff like:
> - PSCI for bringing up secondary cores
> - ARMv8 generic timer
> - GPIO and pinctrl.
>
> The firmware coming with the devices based on this SoC is buggy
> and doesn't configure CNTFRQ_EL0, as required by spec, so it's
> needed to hardcode the frequency in the timer node.
>
> Co-authored-by: Maksym Holovach <nergzd@nergzd723.xyz>
> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
> ---
>  arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi | 525 +++++++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos9810.dtsi         | 256 ++++++++++
>  2 files changed, 781 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..4b2ee59dc7241b0ec31c99fd909d1c5e25aa77e0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
> @@ -0,0 +1,525 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/*
> + * Samsung's Exynos 9810 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
> + * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
> + */
> +
> +#include "exynos-pinctrl.h"
> +
> +&pinctrl_alive {
> +	wakeup-interrupt-controller {
> +		compatible = "samsung,exynos9810-wakeup-eint",
> +			     "samsung,exynos850-wakeup-eint",
> +			     "samsung,exynos7-wakeup-eint";
> +	};
> +
> +	etc1: etc1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};

[snip]

> +
> +	gpp3: gpp3-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpg0: gpg0-gpio-bank {

gpgX comes before gppX, sort all the nodes :D

> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +

[snip]

> +	};
> +};
> +
> +#include "exynos9810-pinctrl.dtsi"
> +#include "arm/samsung/exynos-syscon-restart.dtsi"
>
Krzysztof Kozlowski Oct. 24, 2024, 10:15 a.m. UTC | #2 
On 24/10/2024 00:36, Markuss Broks wrote:
> Exynos 9810 is an ARMv8 mobile SoC found in various Samsung devices,
> such as Samsung Galaxy S9 (starlte), S9 Plus (star2lte),
> Note 9 (crownlte) and perhaps others.
> 
> Add minimal support for this SoC, including basic stuff like:
> - PSCI for bringing up secondary cores
> - ARMv8 generic timer
> - GPIO and pinctrl.
> 
> The firmware coming with the devices based on this SoC is buggy
> and doesn't configure CNTFRQ_EL0, as required by spec, so it's
> needed to hardcode the frequency in the timer node.
> 
> Co-authored-by: Maksym Holovach <nergzd@nergzd723.xyz>
> Signed-off-by: Markuss Broks <markuss.broks@gmail.com>
> ---
>  arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi | 525 +++++++++++++++++++++
>  arch/arm64/boot/dts/exynos/exynos9810.dtsi         | 256 ++++++++++
>  2 files changed, 781 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
> new file mode 100644
> index 0000000000000000000000000000000000000000..4b2ee59dc7241b0ec31c99fd909d1c5e25aa77e0
> --- /dev/null
> +++ b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
> @@ -0,0 +1,525 @@
> +// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
> +/*
> + * Samsung's Exynos 9810 SoC pin-mux and pin-config device tree source
> + *
> + * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
> + * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
> + */
> +
> +#include "exynos-pinctrl.h"
> +
> +&pinctrl_alive {
> +	wakeup-interrupt-controller {

This is part of SoC DTSI.

> +		compatible = "samsung,exynos9810-wakeup-eint",
> +			     "samsung,exynos850-wakeup-eint",
> +			     "samsung,exynos7-wakeup-eint";
> +	};
> +
> +	etc1: etc1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpa0: gpa0-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpa1: gpa1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpa2: gpa2-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpa3: gpa3-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		interrupt-parent = <&gic>;
> +		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
> +			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpa4: gpa4-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpq0: gpq0-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +};
> +
> +&pinctrl_aud {
> +	gpb0: gpb0-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb1: gpb1-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +
> +	gpb2: gpb2-gpio-bank {
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +	};
> +};
> +
> +&pinctrl_chub {
> +	interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;

Please do not introduce different style than all other files.


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..4b2ee59dc7241b0ec31c99fd909d1c5e25aa77e0
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810-pinctrl.dtsi
@@ -0,0 +1,525 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung's Exynos 9810 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+#include "exynos-pinctrl.h"
+
+&pinctrl_alive {
+	wakeup-interrupt-controller {
+		compatible = "samsung,exynos9810-wakeup-eint",
+			     "samsung,exynos850-wakeup-eint",
+			     "samsung,exynos7-wakeup-eint";
+	};
+
+	etc1: etc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa3: gpa3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		interrupt-parent = <&gic>;
+		interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+		#interrupt-cells = <2>;
+	};
+
+	gpa4: gpa4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpq0: gpq0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_aud {
+	gpb0: gpb0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb1: gpb1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpb2: gpb2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_chub {
+	interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+
+	gph0: gph0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gph1: gph1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_cmgp {
+	wakeup-interrupt-controller {
+		compatible = "samsung,exynos9810-wakeup-eint",
+			     "samsung,exynos850-wakeup-eint",
+			     "samsung,exynos7-wakeup-eint";
+	};
+
+	gpm0: gpm0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm1: gpm1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm2: gpm2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm3: gpm3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm4: gpm4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm5: gpm5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm6: gpm6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm7: gpm7-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm10: gpm10-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm11: gpm11-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm12: gpm12-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm13: gpm13-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm14: gpm14-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm15: gpm15-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm16: gpm16-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm17: gpm17-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm40: gpm40-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm41: gpm41-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm42: gpm42-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	gpm43: gpm43-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+
+		interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
+&pinctrl_fsys0 {
+	interrupts = <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>;
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_fsys1 {
+	interrupts = <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>;
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_peric0 {
+	interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
+
+	gpp0: gpp0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp1: gpp1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp2: gpp2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp3: gpp3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg0: gpg0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg1: gpg1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg2: gpg2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_peric1 {
+	interrupts = <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>;
+
+	gpp4: gpp4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp5: gpp5-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpp6: gpp6-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc0: gpc0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpc1: gpc1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpd0: gpd0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpg3: gpg3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
+
+&pinctrl_vts {
+	gpt0: gpt0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos9810.dtsi b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..e8f5ae913e1a9e11fe14e2d4a5d0940415cd3ada
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/exynos9810.dtsi
@@ -0,0 +1,256 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR BSD-3-Clause
+/*
+ * Samsung Exynos 9810 SoC device tree source
+ *
+ * Copyright (c) 2024 Markuss Broks <markuss.broks@gmail.com>
+ * Copyright (c) 2024 Maksym Holovach <nergzd@nergzd723.xyz>
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "samsung,exynos9810";
+	#address-cells = <2>;
+	#size-cells = <1>;
+
+	interrupt-parent = <&gic>;
+
+	aliases {
+		pinctrl0 = &pinctrl_alive;
+		pinctrl1 = &pinctrl_aud;
+		pinctrl2 = &pinctrl_chub;
+		pinctrl3 = &pinctrl_cmgp;
+		pinctrl4 = &pinctrl_fsys0;
+		pinctrl5 = &pinctrl_fsys1;
+		pinctrl6 = &pinctrl_peric0;
+		pinctrl7 = &pinctrl_peric1;
+		pinctrl8 = &pinctrl_vts;
+	};
+
+	arm-a55-pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>,
+				     <&cpu1>,
+				     <&cpu2>,
+				     <&cpu3>;
+	};
+
+	mongoose-m3-pmu {
+		compatible = "samsung,mongoose-pmu";
+		interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu4>,
+				     <&cpu5>,
+				     <&cpu6>,
+				     <&cpu7>;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+				core1 {
+					cpu = <&cpu1>;
+				};
+				core2 {
+					cpu = <&cpu2>;
+				};
+				core3 {
+					cpu = <&cpu3>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu4>;
+				};
+				core1 {
+					cpu = <&cpu5>;
+				};
+				core2 {
+					cpu = <&cpu6>;
+				};
+				core3 {
+					cpu = <&cpu7>;
+				};
+			};
+		};
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x1>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x2>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x3>;
+			enable-method = "psci";
+		};
+
+		cpu4: cpu@100 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+
+		cpu5: cpu@101 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+
+		cpu6: cpu@102 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x102>;
+			enable-method = "psci";
+		};
+
+		cpu7: cpu@103 {
+			device_type = "cpu";
+			compatible = "samsung,mongoose-m3";
+			reg = <0x103>;
+			enable-method = "psci";
+		};
+	};
+
+	oscclk: osc-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "oscclk";
+	};
+
+	psci {
+		compatible = "arm,psci";
+		method = "smc";
+		cpu_off = <0x84000002>;
+		cpu_on = <0xc4000003>;
+		cpu_suspend = <0xc4000001>;
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		chipid@10000000 {
+			compatible = "samsung,exynos9810-chipid",
+				     "samsung,exynos850-chipid";
+			reg = <0x10000000 0x100>;
+		};
+
+		gic: interrupt-controller@10101000 {
+			compatible = "arm,gic-400";
+			reg = <0x10101000 0x1000>,
+			      <0x10102000 0x1000>,
+			      <0x10104000 0x2000>,
+			      <0x10106000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) |
+						 IRQ_TYPE_LEVEL_HIGH)>;
+			#address-cells = <0>;
+			#size-cells = <1>;
+		};
+
+		pinctrl_peric0: pinctrl@10430000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x10430000 0x1000>;
+		};
+
+		pinctrl_peric1: pinctrl@10830000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x10830000 0x1000>;
+		};
+
+		pinctrl_fsys0: pinctrl@11050000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x11050000 0x1000>;
+		};
+
+		pinctrl_fsys1: pinctrl@11430000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x11430000 0x1000>;
+		};
+
+		pinctrl_vts: pinctrl@13880000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x13880000 0x1000>;
+		};
+
+		pinctrl_chub: pinctrl@13a80000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x13a80000 0x1000>;
+		};
+
+		pinctrl_alive: pinctrl@14050000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x14050000 0x1000>;
+		};
+
+		pmu_system_controller: system-controller@14060000 {
+			compatible = "samsung,exynos9810-pmu",
+				     "samsung,exynos7-pmu", "syscon";
+			reg = <0x14060000 0x10000>;
+		};
+
+		pinctrl_cmgp: pinctrl@14220000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x14220000 0x1000>;
+		};
+
+		pinctrl_aud: pinctrl@17c60000 {
+			compatible = "samsung,exynos9810-pinctrl";
+			reg = <0x17c60000 0x1000>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		/* Hypervisor Virtual Timer interrupt is not wired to GIC */
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		/*
+		 * Non-updatable, broken stock Samsung bootloader does not
+		 * configure CNTFRQ_EL0
+		 */
+		clock-frequency = <26000000>;
+	};
+};
+
+#include "exynos9810-pinctrl.dtsi"
+#include "arm/samsung/exynos-syscon-restart.dtsi"