| Message ID | 20240314232201.2102178-13-jan.dakinevich@salutedevices.com |
|---|---|
| State | New |
| Headers | show |
| Series | Introduce support of audio for Amlogic A1 SoC family | expand |
On Fri, Mar 15, 2024 at 02:21:48AM +0300, Jan Dakinevich wrote: > +static const char * const a1_adc_mic_bias_level_txt[] = { "2.0V", "2.1V", > + "2.3V", "2.5V", "2.8V" }; > +static const unsigned int a1_adc_mic_bias_level_values[] = { 0, 1, 2, 3, 7 }; Why would this be varied at runtime rather than being something fixed when the system is designed? > +static const char * const a1_adc_pga_txt[] = { "None", "Differential", > + "Positive", "Negative" }; > +static const unsigned int a1_adc_pga_right_values[] = { 0, PGAR_DIFF, > + PGAR_POSITIVE, PGAR_NEGATIVE }; > +static const unsigned int a1_adc_pga_left_values[] = { 0, PGAL_DIFF, > + PGAL_POSITIVE, PGAL_NEGATIVE }; Similarly here. > + SOC_SINGLE("ADC Mic Bias Switch", LINEIN_CFG, MICBIAS_EN, 1, 0), > + SOC_ENUM("ADC Mic Bias Level", a1_adc_mic_bias_level), Why would micbias be user controlled rather than a DAPM widget as normal?
On 3/15/24 16:36, Mark Brown wrote: > On Fri, Mar 15, 2024 at 02:21:48AM +0300, Jan Dakinevich wrote: > >> +static const char * const a1_adc_mic_bias_level_txt[] = { "2.0V", "2.1V", >> + "2.3V", "2.5V", "2.8V" }; >> +static const unsigned int a1_adc_mic_bias_level_values[] = { 0, 1, 2, 3, 7 }; > > Why would this be varied at runtime rather than being something fixed > when the system is designed? > >> +static const char * const a1_adc_pga_txt[] = { "None", "Differential", >> + "Positive", "Negative" }; >> +static const unsigned int a1_adc_pga_right_values[] = { 0, PGAR_DIFF, >> + PGAR_POSITIVE, PGAR_NEGATIVE }; >> +static const unsigned int a1_adc_pga_left_values[] = { 0, PGAL_DIFF, >> + PGAL_POSITIVE, PGAL_NEGATIVE }; > > Similarly here. > Both mic bias and ADC's input mode depends on schematics and should be configurable. What is the better way to give access to these parameters? Device tree? >> + SOC_SINGLE("ADC Mic Bias Switch", LINEIN_CFG, MICBIAS_EN, 1, 0), >> + SOC_ENUM("ADC Mic Bias Level", a1_adc_mic_bias_level), > > Why would micbias be user controlled rather than a DAPM widget as > normal? Yes, I could use SND_SOC_DAPM_SUPPLY, but it supports only raw values, and doesn't supports enums. Here, I want to use enum to restrict possible values, because only these values mentioned in the documentation that I have.
On Fri 15 Mar 2024 at 02:21, Jan Dakinevich <jan.dakinevich@salutedevices.com> wrote: > A1's internal codec is very close to t9015. The main difference, that it > has ADC. This commit introduces support for capturing from it. This is mis-leading. It does not look like the change is A1 specific but rather a extension of the support for t9015. It also mixes several different topics like line configuration, capture support, etc ... Again, the t9015 changes should be a separated series from the rest, and there should be one patch per topic. As Mark, if something is meant to be configured based on the HW layout, then there a good change a kcontrol is not appropriate, and this should rather be part of the platform description, like DT. It was also suggested here: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/meson/t9015.c?h=v6.8#n298 > > Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com> > --- > sound/soc/meson/t9015.c | 259 ++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 259 insertions(+) > > diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c > index 48f6767bd858..365955bfeb78 100644 > --- a/sound/soc/meson/t9015.c > +++ b/sound/soc/meson/t9015.c > @@ -19,16 +19,33 @@ > #define LOLP_EN 3 > #define DACR_EN 4 > #define DACL_EN 5 > +#define ADCR_EN 6 > +#define ADCL_EN 7 > +#define PGAR_ZCD_EN 8 > +#define PGAL_ZCD_EN 9 > +#define PGAR_EN 10 > +#define PGAL_EN 11 > +#define ADCR_INV 16 > +#define ADCL_INV 17 > +#define ADCR_SRC 18 > +#define ADCL_SRC 19 > #define DACR_INV 20 > #define DACL_INV 21 > #define DACR_SRC 22 > #define DACL_SRC 23 > +#define ADC_DEM_EN 26 > +#define ADC_FILTER_MODE 28 > +#define ADC_FILTER_EN 29 > #define REFP_BUF_EN BIT(12) > #define BIAS_CURRENT_EN BIT(13) > #define VMID_GEN_FAST BIT(14) > #define VMID_GEN_EN BIT(15) > #define I2S_MODE BIT(30) > #define VOL_CTRL0 0x04 > +#define PGAR_VC 0 > +#define PGAL_VC 8 > +#define ADCR_VC 16 > +#define ADCL_VC 24 > #define GAIN_H 31 > #define GAIN_L 23 > #define VOL_CTRL1 0x08 > @@ -46,6 +63,28 @@ > #define LOLN_POL 8 > #define LOLP_POL 12 > #define POWER_CFG 0x10 > +#define LINEIN_CFG 0x14 > +#define MICBIAS_LEVEL 0 > +#define MICBIAS_EN 3 > +#define PGAR_CTVMN 8 > +#define PGAR_CTVMP 9 > +#define PGAL_CTVMN 10 > +#define PGAL_CTVMP 11 > +#define PGAR_CTVIN 12 > +#define PGAR_CTVIP 13 > +#define PGAL_CTVIN 14 > +#define PGAL_CTVIP 15 > + > +#define PGAR_MASK (BIT(PGAR_CTVMP) | BIT(PGAR_CTVMN) | \ > + BIT(PGAR_CTVIP) | BIT(PGAR_CTVIN)) > +#define PGAR_DIFF (BIT(PGAR_CTVIP) | BIT(PGAR_CTVIN)) > +#define PGAR_POSITIVE (BIT(PGAR_CTVIP) | BIT(PGAR_CTVMN)) > +#define PGAR_NEGATIVE (BIT(PGAR_CTVIN) | BIT(PGAR_CTVMP)) > +#define PGAL_MASK (BIT(PGAL_CTVMP) | BIT(PGAL_CTVMN) | \ > + BIT(PGAL_CTVIP) | BIT(PGAL_CTVIN)) > +#define PGAL_DIFF (BIT(PGAL_CTVIP) | BIT(PGAL_CTVIN)) > +#define PGAL_POSITIVE (BIT(PGAL_CTVIP) | BIT(PGAL_CTVMN)) > +#define PGAL_NEGATIVE (BIT(PGAL_CTVIN) | BIT(PGAL_CTVMP)) > > struct t9015 { > struct regulator *avdd; > @@ -103,6 +142,31 @@ static struct snd_soc_dai_driver t9015_dai = { > .ops = &t9015_dai_ops, > }; > > +static struct snd_soc_dai_driver a1_t9015_dai = { > + .name = "t9015-hifi", > + .playback = { > + .stream_name = "Playback", > + .channels_min = 1, > + .channels_max = 2, > + .rates = SNDRV_PCM_RATE_8000_96000, > + .formats = (SNDRV_PCM_FMTBIT_S8 | > + SNDRV_PCM_FMTBIT_S16_LE | > + SNDRV_PCM_FMTBIT_S20_LE | > + SNDRV_PCM_FMTBIT_S24_LE), > + }, > + .capture = { > + .stream_name = "Capture", > + .channels_min = 1, > + .channels_max = 2, > + .rates = SNDRV_PCM_RATE_8000_96000, > + .formats = (SNDRV_PCM_FMTBIT_S8 | > + SNDRV_PCM_FMTBIT_S16_LE | > + SNDRV_PCM_FMTBIT_S20_LE | > + SNDRV_PCM_FMTBIT_S24_LE), > + }, > + .ops = &t9015_dai_ops, > +}; > + > static const DECLARE_TLV_DB_MINMAX_MUTE(dac_vol_tlv, -9525, 0); > > static const char * const ramp_rate_txt[] = { "Fast", "Slow" }; > @@ -179,6 +243,166 @@ static const struct snd_soc_dapm_route t9015_dapm_routes[] = { > { "LOLP", NULL, "Left+ Driver", }, > }; > > +static const char * const a1_right_driver_txt[] = { "None", "Right DAC", > + "Left DAC Inverted" }; > +static const unsigned int a1_right_driver_values[] = { 0, 2, 4 }; > + > +static const char * const a1_left_driver_txt[] = { "None", "Left DAC", > + "Right DAC Inverted" }; > +static const unsigned int a1_left_driver_values[] = { 0, 2, 4 }; > + > +static SOC_VALUE_ENUM_SINGLE_DECL(a1_right_driver, LINEOUT_CFG, 12, 0x7, > + a1_right_driver_txt, a1_right_driver_values); > +static SOC_VALUE_ENUM_SINGLE_DECL(a1_left_driver, LINEOUT_CFG, 4, 0x7, > + a1_left_driver_txt, a1_left_driver_values); > + > +static const struct snd_kcontrol_new a1_right_driver_mux = > + SOC_DAPM_ENUM("Right Driver+ Source", a1_right_driver); > +static const struct snd_kcontrol_new a1_left_driver_mux = > + SOC_DAPM_ENUM("Left Driver+ Source", a1_left_driver); > + > +static const DECLARE_TLV_DB_MINMAX_MUTE(a1_adc_vol_tlv, -29625, 0); > +static const DECLARE_TLV_DB_MINMAX_MUTE(a1_adc_pga_vol_tlv, -1200, 0); > + > +static const char * const a1_adc_right_txt[] = { "Right", "Left" }; > +static SOC_ENUM_SINGLE_DECL(a1_adc_right, BLOCK_EN, ADCR_SRC, a1_adc_right_txt); > + > +static const char * const a1_adc_left_txt[] = { "Left", "Right" }; > +static SOC_ENUM_SINGLE_DECL(a1_adc_left, BLOCK_EN, ADCL_SRC, a1_adc_left_txt); > + > +static const struct snd_kcontrol_new a1_adc_right_mux = > + SOC_DAPM_ENUM("ADC Right Source", a1_adc_right); > +static const struct snd_kcontrol_new a1_adc_left_mux = > + SOC_DAPM_ENUM("ADC Left Source", a1_adc_left); > + > +static const char * const a1_adc_filter_mode_txt[] = { "Voice", "HiFi"}; > +static SOC_ENUM_SINGLE_DECL(a1_adc_filter_mode, BLOCK_EN, ADC_FILTER_MODE, > + a1_adc_filter_mode_txt); > + > +static const char * const a1_adc_mic_bias_level_txt[] = { "2.0V", "2.1V", > + "2.3V", "2.5V", "2.8V" }; > +static const unsigned int a1_adc_mic_bias_level_values[] = { 0, 1, 2, 3, 7 }; > +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_mic_bias_level, > + LINEIN_CFG, MICBIAS_LEVEL, 0x7, > + a1_adc_mic_bias_level_txt, > + a1_adc_mic_bias_level_values); > + > +static const char * const a1_adc_pga_txt[] = { "None", "Differential", > + "Positive", "Negative" }; > +static const unsigned int a1_adc_pga_right_values[] = { 0, PGAR_DIFF, > + PGAR_POSITIVE, PGAR_NEGATIVE }; > +static const unsigned int a1_adc_pga_left_values[] = { 0, PGAL_DIFF, > + PGAL_POSITIVE, PGAL_NEGATIVE }; > + > +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_pga_right, LINEIN_CFG, 0, PGAR_MASK, > + a1_adc_pga_txt, a1_adc_pga_right_values); > +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_pga_left, LINEIN_CFG, 0, PGAL_MASK, > + a1_adc_pga_txt, a1_adc_pga_left_values); > + > +static const struct snd_kcontrol_new a1_adc_pga_right_mux = > + SOC_DAPM_ENUM("ADC PGA Right Source", a1_adc_pga_right); > +static const struct snd_kcontrol_new a1_adc_pga_left_mux = > + SOC_DAPM_ENUM("ADC PGA Left Source", a1_adc_pga_left); > + > +static const struct snd_kcontrol_new a1_t9015_snd_controls[] = { > + /* Volume Controls */ > + SOC_ENUM("Playback Channel Mode", mono_enum), > + SOC_SINGLE("Playback Switch", VOL_CTRL1, DAC_SOFT_MUTE, 1, 1), > + SOC_DOUBLE_TLV("Playback Volume", VOL_CTRL1, DACL_VC, DACR_VC, > + 0xff, 0, dac_vol_tlv), > + > + /* Ramp Controls */ > + SOC_ENUM("Ramp Rate", ramp_rate_enum), > + SOC_SINGLE("Volume Ramp Switch", VOL_CTRL1, VC_RAMP_MODE, 1, 0), > + SOC_SINGLE("Mute Ramp Switch", VOL_CTRL1, MUTE_MODE, 1, 0), > + SOC_SINGLE("Unmute Ramp Switch", VOL_CTRL1, UNMUTE_MODE, 1, 0), > + > + /* ADC Controls */ > + SOC_DOUBLE_TLV("ADC Volume", VOL_CTRL0, ADCL_VC, ADCR_VC, > + 0x7f, 0, a1_adc_vol_tlv), > + SOC_SINGLE("ADC Filter Switch", BLOCK_EN, ADC_FILTER_EN, 1, 0), > + SOC_ENUM("ADC Filter Mode", a1_adc_filter_mode), > + SOC_SINGLE("ADC Mic Bias Switch", LINEIN_CFG, MICBIAS_EN, 1, 0), > + SOC_ENUM("ADC Mic Bias Level", a1_adc_mic_bias_level), > + SOC_SINGLE("ADC DEM Switch", BLOCK_EN, ADC_DEM_EN, 1, 0), > + SOC_DOUBLE_TLV("ADC PGA Volume", VOL_CTRL0, PGAR_VC, PGAL_VC, > + 0x1f, 0, a1_adc_pga_vol_tlv), > + SOC_DOUBLE("ADC PGA Zero Cross-detection Switch", BLOCK_EN, > + PGAL_ZCD_EN, PGAR_ZCD_EN, 1, 0), > +}; > + > +static const struct snd_soc_dapm_widget a1_t9015_dapm_widgets[] = { > + SND_SOC_DAPM_AIF_IN("Right IN", NULL, 0, SND_SOC_NOPM, 0, 0), > + SND_SOC_DAPM_AIF_IN("Left IN", NULL, 0, SND_SOC_NOPM, 0, 0), > + SND_SOC_DAPM_MUX("Right DAC Sel", SND_SOC_NOPM, 0, 0, > + &t9015_right_dac_mux), > + SND_SOC_DAPM_MUX("Left DAC Sel", SND_SOC_NOPM, 0, 0, > + &t9015_left_dac_mux), > + SND_SOC_DAPM_DAC("Right DAC", NULL, BLOCK_EN, DACR_EN, 0), > + SND_SOC_DAPM_DAC("Left DAC", NULL, BLOCK_EN, DACL_EN, 0), > + SND_SOC_DAPM_MUX("Right+ Driver Sel", SND_SOC_NOPM, 0, 0, > + &a1_right_driver_mux), > + SND_SOC_DAPM_MUX("Left+ Driver Sel", SND_SOC_NOPM, 0, 0, > + &a1_left_driver_mux), > + SND_SOC_DAPM_OUT_DRV("Right+ Driver", BLOCK_EN, LORP_EN, 0, NULL, 0), > + SND_SOC_DAPM_OUT_DRV("Left+ Driver", BLOCK_EN, LOLP_EN, 0, NULL, 0), > + SND_SOC_DAPM_OUTPUT("LORP"), > + SND_SOC_DAPM_OUTPUT("LOLP"), > + > + SND_SOC_DAPM_INPUT("ADC IN Right"), > + SND_SOC_DAPM_INPUT("ADC IN Left"), > + SND_SOC_DAPM_MUX("ADC PGA Right Sel", SND_SOC_NOPM, 0, 0, > + &a1_adc_pga_right_mux), > + SND_SOC_DAPM_MUX("ADC PGA Left Sel", SND_SOC_NOPM, 0, 0, > + &a1_adc_pga_left_mux), > + SND_SOC_DAPM_PGA("ADC PGA Right", BLOCK_EN, PGAR_EN, 0, NULL, 0), > + SND_SOC_DAPM_PGA("ADC PGA Left", BLOCK_EN, PGAL_EN, 0, NULL, 0), > + SND_SOC_DAPM_ADC("ADC Right", NULL, BLOCK_EN, ADCR_EN, 0), > + SND_SOC_DAPM_ADC("ADC Left", NULL, BLOCK_EN, ADCL_EN, 0), > + SND_SOC_DAPM_MUX("ADC Right Sel", SND_SOC_NOPM, 0, 0, &a1_adc_right_mux), > + SND_SOC_DAPM_MUX("ADC Left Sel", SND_SOC_NOPM, 0, 0, &a1_adc_left_mux), > + SND_SOC_DAPM_AIF_OUT("ADC OUT Right", NULL, 0, SND_SOC_NOPM, 0, 0), > + SND_SOC_DAPM_AIF_OUT("ADC OUT Left", NULL, 0, SND_SOC_NOPM, 0, 0), > +}; > + > +static const struct snd_soc_dapm_route a1_t9015_dapm_routes[] = { > + { "Right IN", NULL, "Playback" }, > + { "Left IN", NULL, "Playback" }, > + { "Right DAC Sel", "Right", "Right IN" }, > + { "Right DAC Sel", "Left", "Left IN" }, > + { "Left DAC Sel", "Right", "Right IN" }, > + { "Left DAC Sel", "Left", "Left IN" }, > + { "Right DAC", NULL, "Right DAC Sel" }, > + { "Left DAC", NULL, "Left DAC Sel" }, > + { "Right+ Driver Sel", "Right DAC", "Right DAC" }, > + { "Right+ Driver Sel", "Left DAC Inverted", "Right DAC" }, > + { "Left+ Driver Sel", "Left DAC", "Left DAC" }, > + { "Left+ Driver Sel", "Right DAC Inverted", "Left DAC" }, > + { "Right+ Driver", NULL, "Right+ Driver Sel" }, > + { "Left+ Driver", NULL, "Left+ Driver Sel" }, > + { "LORP", NULL, "Right+ Driver", }, > + { "LOLP", NULL, "Left+ Driver", }, > + > + { "ADC PGA Right Sel", "Differential", "ADC IN Right" }, > + { "ADC PGA Right Sel", "Positive", "ADC IN Right" }, > + { "ADC PGA Right Sel", "Negative", "ADC IN Right" }, > + { "ADC PGA Left Sel", "Differential", "ADC IN Left" }, > + { "ADC PGA Left Sel", "Positive", "ADC IN Left" }, > + { "ADC PGA Left Sel", "Negative", "ADC IN Left" }, > + { "ADC PGA Right", NULL, "ADC PGA Right Sel" }, > + { "ADC PGA Left", NULL, "ADC PGA Left Sel" }, > + { "ADC Right", NULL, "ADC PGA Right" }, > + { "ADC Left", NULL, "ADC PGA Left" }, > + { "ADC Right Sel", "Right", "ADC Right" }, > + { "ADC Right Sel", "Left", "ADC Left" }, > + { "ADC Left Sel", "Right", "ADC Right" }, > + { "ADC Left Sel", "Left", "ADC Left" }, > + { "ADC OUT Right", NULL, "ADC Right Sel" }, > + { "ADC OUT Left", NULL, "ADC Left Sel" }, > + { "Capture", NULL, "ADC OUT Right" }, > + { "Capture", NULL, "ADC OUT Left" }, > +}; > + > static int t9015_set_bias_level(struct snd_soc_component *component, > enum snd_soc_bias_level level) > { > @@ -241,6 +465,18 @@ static int t9015_component_probe(struct snd_soc_component *component) > return 0; > } > > +static int a1_t9015_component_probe(struct snd_soc_component *component) > +{ > + /* > + * This configuration was stealed from original Amlogic's driver to > + * reproduce the behavior of the driver more accurately. However, it is > + * not known for certain what it actually affects. > + */ > + snd_soc_component_write(component, POWER_CFG, 0x00010000); > + > + return 0; > +} > + > static const struct snd_soc_component_driver t9015_codec_driver = { > .probe = t9015_component_probe, > .set_bias_level = t9015_set_bias_level, > @@ -254,6 +490,19 @@ static const struct snd_soc_component_driver t9015_codec_driver = { > .endianness = 1, > }; > > +static const struct snd_soc_component_driver a1_t9015_codec_driver = { > + .probe = a1_t9015_component_probe, > + .set_bias_level = t9015_set_bias_level, > + .controls = a1_t9015_snd_controls, > + .num_controls = ARRAY_SIZE(a1_t9015_snd_controls), > + .dapm_widgets = a1_t9015_dapm_widgets, > + .num_dapm_widgets = ARRAY_SIZE(a1_t9015_dapm_widgets), > + .dapm_routes = a1_t9015_dapm_routes, > + .num_dapm_routes = ARRAY_SIZE(a1_t9015_dapm_routes), > + .suspend_bias_off = 1, > + .endianness = 1, > +}; > + > static int t9015_probe(struct platform_device *pdev) > { > struct device *dev = &pdev->dev; > @@ -315,11 +564,21 @@ static const struct t9015_match_data t9015_match_data = { > .max_register = POWER_CFG, > }; > > +static const struct t9015_match_data a1_t9015_match_data = { > + .component_drv = &a1_t9015_codec_driver, > + .dai_drv = &a1_t9015_dai, > + .max_register = LINEIN_CFG, > +}; > + > static const struct of_device_id t9015_ids[] __maybe_unused = { > { > .compatible = "amlogic,t9015", > .data = &t9015_match_data, > }, > + { > + .compatible = "amlogic,t9015-a1", > + .data = &a1_t9015_match_data, > + }, > { } > }; > MODULE_DEVICE_TABLE(of, t9015_ids);
On Sun, Mar 17, 2024 at 07:27:14PM +0300, Jan Dakinevich wrote: > Both mic bias and ADC's input mode depends on schematics and should be > configurable. What is the better way to give access to these parameters? > Device tree? Yes. > >> + SOC_SINGLE("ADC Mic Bias Switch", LINEIN_CFG, MICBIAS_EN, 1, 0), > >> + SOC_ENUM("ADC Mic Bias Level", a1_adc_mic_bias_level), > > Why would micbias be user controlled rather than a DAPM widget as > > normal? > Yes, I could use SND_SOC_DAPM_SUPPLY, but it supports only raw values, > and doesn't supports enums. Here, I want to use enum to restrict > possible values, because only these values mentioned in the > documentation that I have. A supply is an on/off switch not an enum. Users should not be selecting values at all.
On 3/18/24 16:48, Mark Brown wrote: > On Sun, Mar 17, 2024 at 07:27:14PM +0300, Jan Dakinevich wrote: > >> Both mic bias and ADC's input mode depends on schematics and should be >> configurable. What is the better way to give access to these parameters? >> Device tree? > > Yes. > >>>> + SOC_SINGLE("ADC Mic Bias Switch", LINEIN_CFG, MICBIAS_EN, 1, 0), >>>> + SOC_ENUM("ADC Mic Bias Level", a1_adc_mic_bias_level), > >>> Why would micbias be user controlled rather than a DAPM widget as >>> normal? > >> Yes, I could use SND_SOC_DAPM_SUPPLY, but it supports only raw values, >> and doesn't supports enums. Here, I want to use enum to restrict >> possible values, because only these values mentioned in the >> documentation that I have. > > A supply is an on/off switch not an enum. Users should not be selecting > values at all. Ok. For me it is great if I am free to move these kcontrols to device tree.
On 3/18/24 13:46, Jerome Brunet wrote: > > On Fri 15 Mar 2024 at 02:21, Jan Dakinevich <jan.dakinevich@salutedevices.com> wrote: > >> A1's internal codec is very close to t9015. The main difference, that it >> has ADC. This commit introduces support for capturing from it. > > This is mis-leading. > > It does not look like the change is A1 specific but rather a extension > of the support for t9015. It also mixes several different topics like line > configuration, capture support, etc ... > First, it is not only extentsion. Some bits are changed comparing to existing t9015, so new compatible string is still required. Second, I don't know anything about about ADC in t9015 on other SoCs and even don't sure that it exist there (may be I am inattentive, but I'm unable to find audio input pin on sm1/g12a's pinout). > Again, the t9015 changes should be a separated series from the rest, and > there should be one patch per topic. > > As Mark, if something is meant to be configured based on the HW layout, > then there a good change a kcontrol is not appropriate, and this should > rather be part of the platform description, like DT. > > It was also suggested here: > https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/sound/soc/meson/t9015.c?h=v6.8#n298 > Ok. By the way, on a1 LINEOUT_CFG would have another value. >> >> Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com> >> --- >> sound/soc/meson/t9015.c | 259 ++++++++++++++++++++++++++++++++++++++++ >> 1 file changed, 259 insertions(+) >> >> diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c >> index 48f6767bd858..365955bfeb78 100644 >> --- a/sound/soc/meson/t9015.c >> +++ b/sound/soc/meson/t9015.c >> @@ -19,16 +19,33 @@ >> #define LOLP_EN 3 >> #define DACR_EN 4 >> #define DACL_EN 5 >> +#define ADCR_EN 6 >> +#define ADCL_EN 7 >> +#define PGAR_ZCD_EN 8 >> +#define PGAL_ZCD_EN 9 >> +#define PGAR_EN 10 >> +#define PGAL_EN 11 >> +#define ADCR_INV 16 >> +#define ADCL_INV 17 >> +#define ADCR_SRC 18 >> +#define ADCL_SRC 19 >> #define DACR_INV 20 >> #define DACL_INV 21 >> #define DACR_SRC 22 >> #define DACL_SRC 23 >> +#define ADC_DEM_EN 26 >> +#define ADC_FILTER_MODE 28 >> +#define ADC_FILTER_EN 29 >> #define REFP_BUF_EN BIT(12) >> #define BIAS_CURRENT_EN BIT(13) >> #define VMID_GEN_FAST BIT(14) >> #define VMID_GEN_EN BIT(15) >> #define I2S_MODE BIT(30) >> #define VOL_CTRL0 0x04 >> +#define PGAR_VC 0 >> +#define PGAL_VC 8 >> +#define ADCR_VC 16 >> +#define ADCL_VC 24 >> #define GAIN_H 31 >> #define GAIN_L 23 >> #define VOL_CTRL1 0x08 >> @@ -46,6 +63,28 @@ >> #define LOLN_POL 8 >> #define LOLP_POL 12 >> #define POWER_CFG 0x10 >> +#define LINEIN_CFG 0x14 >> +#define MICBIAS_LEVEL 0 >> +#define MICBIAS_EN 3 >> +#define PGAR_CTVMN 8 >> +#define PGAR_CTVMP 9 >> +#define PGAL_CTVMN 10 >> +#define PGAL_CTVMP 11 >> +#define PGAR_CTVIN 12 >> +#define PGAR_CTVIP 13 >> +#define PGAL_CTVIN 14 >> +#define PGAL_CTVIP 15 >> + >> +#define PGAR_MASK (BIT(PGAR_CTVMP) | BIT(PGAR_CTVMN) | \ >> + BIT(PGAR_CTVIP) | BIT(PGAR_CTVIN)) >> +#define PGAR_DIFF (BIT(PGAR_CTVIP) | BIT(PGAR_CTVIN)) >> +#define PGAR_POSITIVE (BIT(PGAR_CTVIP) | BIT(PGAR_CTVMN)) >> +#define PGAR_NEGATIVE (BIT(PGAR_CTVIN) | BIT(PGAR_CTVMP)) >> +#define PGAL_MASK (BIT(PGAL_CTVMP) | BIT(PGAL_CTVMN) | \ >> + BIT(PGAL_CTVIP) | BIT(PGAL_CTVIN)) >> +#define PGAL_DIFF (BIT(PGAL_CTVIP) | BIT(PGAL_CTVIN)) >> +#define PGAL_POSITIVE (BIT(PGAL_CTVIP) | BIT(PGAL_CTVMN)) >> +#define PGAL_NEGATIVE (BIT(PGAL_CTVIN) | BIT(PGAL_CTVMP)) >> >> struct t9015 { >> struct regulator *avdd; >> @@ -103,6 +142,31 @@ static struct snd_soc_dai_driver t9015_dai = { >> .ops = &t9015_dai_ops, >> }; >> >> +static struct snd_soc_dai_driver a1_t9015_dai = { >> + .name = "t9015-hifi", >> + .playback = { >> + .stream_name = "Playback", >> + .channels_min = 1, >> + .channels_max = 2, >> + .rates = SNDRV_PCM_RATE_8000_96000, >> + .formats = (SNDRV_PCM_FMTBIT_S8 | >> + SNDRV_PCM_FMTBIT_S16_LE | >> + SNDRV_PCM_FMTBIT_S20_LE | >> + SNDRV_PCM_FMTBIT_S24_LE), >> + }, >> + .capture = { >> + .stream_name = "Capture", >> + .channels_min = 1, >> + .channels_max = 2, >> + .rates = SNDRV_PCM_RATE_8000_96000, >> + .formats = (SNDRV_PCM_FMTBIT_S8 | >> + SNDRV_PCM_FMTBIT_S16_LE | >> + SNDRV_PCM_FMTBIT_S20_LE | >> + SNDRV_PCM_FMTBIT_S24_LE), >> + }, >> + .ops = &t9015_dai_ops, >> +}; >> + >> static const DECLARE_TLV_DB_MINMAX_MUTE(dac_vol_tlv, -9525, 0); >> >> static const char * const ramp_rate_txt[] = { "Fast", "Slow" }; >> @@ -179,6 +243,166 @@ static const struct snd_soc_dapm_route t9015_dapm_routes[] = { >> { "LOLP", NULL, "Left+ Driver", }, >> }; >> >> +static const char * const a1_right_driver_txt[] = { "None", "Right DAC", >> + "Left DAC Inverted" }; >> +static const unsigned int a1_right_driver_values[] = { 0, 2, 4 }; >> + >> +static const char * const a1_left_driver_txt[] = { "None", "Left DAC", >> + "Right DAC Inverted" }; >> +static const unsigned int a1_left_driver_values[] = { 0, 2, 4 }; >> + >> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_right_driver, LINEOUT_CFG, 12, 0x7, >> + a1_right_driver_txt, a1_right_driver_values); >> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_left_driver, LINEOUT_CFG, 4, 0x7, >> + a1_left_driver_txt, a1_left_driver_values); >> + >> +static const struct snd_kcontrol_new a1_right_driver_mux = >> + SOC_DAPM_ENUM("Right Driver+ Source", a1_right_driver); >> +static const struct snd_kcontrol_new a1_left_driver_mux = >> + SOC_DAPM_ENUM("Left Driver+ Source", a1_left_driver); >> + >> +static const DECLARE_TLV_DB_MINMAX_MUTE(a1_adc_vol_tlv, -29625, 0); >> +static const DECLARE_TLV_DB_MINMAX_MUTE(a1_adc_pga_vol_tlv, -1200, 0); >> + >> +static const char * const a1_adc_right_txt[] = { "Right", "Left" }; >> +static SOC_ENUM_SINGLE_DECL(a1_adc_right, BLOCK_EN, ADCR_SRC, a1_adc_right_txt); >> + >> +static const char * const a1_adc_left_txt[] = { "Left", "Right" }; >> +static SOC_ENUM_SINGLE_DECL(a1_adc_left, BLOCK_EN, ADCL_SRC, a1_adc_left_txt); >> + >> +static const struct snd_kcontrol_new a1_adc_right_mux = >> + SOC_DAPM_ENUM("ADC Right Source", a1_adc_right); >> +static const struct snd_kcontrol_new a1_adc_left_mux = >> + SOC_DAPM_ENUM("ADC Left Source", a1_adc_left); >> + >> +static const char * const a1_adc_filter_mode_txt[] = { "Voice", "HiFi"}; >> +static SOC_ENUM_SINGLE_DECL(a1_adc_filter_mode, BLOCK_EN, ADC_FILTER_MODE, >> + a1_adc_filter_mode_txt); >> + >> +static const char * const a1_adc_mic_bias_level_txt[] = { "2.0V", "2.1V", >> + "2.3V", "2.5V", "2.8V" }; >> +static const unsigned int a1_adc_mic_bias_level_values[] = { 0, 1, 2, 3, 7 }; >> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_mic_bias_level, >> + LINEIN_CFG, MICBIAS_LEVEL, 0x7, >> + a1_adc_mic_bias_level_txt, >> + a1_adc_mic_bias_level_values); >> + >> +static const char * const a1_adc_pga_txt[] = { "None", "Differential", >> + "Positive", "Negative" }; >> +static const unsigned int a1_adc_pga_right_values[] = { 0, PGAR_DIFF, >> + PGAR_POSITIVE, PGAR_NEGATIVE }; >> +static const unsigned int a1_adc_pga_left_values[] = { 0, PGAL_DIFF, >> + PGAL_POSITIVE, PGAL_NEGATIVE }; >> + >> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_pga_right, LINEIN_CFG, 0, PGAR_MASK, >> + a1_adc_pga_txt, a1_adc_pga_right_values); >> +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_pga_left, LINEIN_CFG, 0, PGAL_MASK, >> + a1_adc_pga_txt, a1_adc_pga_left_values); >> + >> +static const struct snd_kcontrol_new a1_adc_pga_right_mux = >> + SOC_DAPM_ENUM("ADC PGA Right Source", a1_adc_pga_right); >> +static const struct snd_kcontrol_new a1_adc_pga_left_mux = >> + SOC_DAPM_ENUM("ADC PGA Left Source", a1_adc_pga_left); >> + >> +static const struct snd_kcontrol_new a1_t9015_snd_controls[] = { >> + /* Volume Controls */ >> + SOC_ENUM("Playback Channel Mode", mono_enum), >> + SOC_SINGLE("Playback Switch", VOL_CTRL1, DAC_SOFT_MUTE, 1, 1), >> + SOC_DOUBLE_TLV("Playback Volume", VOL_CTRL1, DACL_VC, DACR_VC, >> + 0xff, 0, dac_vol_tlv), >> + >> + /* Ramp Controls */ >> + SOC_ENUM("Ramp Rate", ramp_rate_enum), >> + SOC_SINGLE("Volume Ramp Switch", VOL_CTRL1, VC_RAMP_MODE, 1, 0), >> + SOC_SINGLE("Mute Ramp Switch", VOL_CTRL1, MUTE_MODE, 1, 0), >> + SOC_SINGLE("Unmute Ramp Switch", VOL_CTRL1, UNMUTE_MODE, 1, 0), >> + >> + /* ADC Controls */ >> + SOC_DOUBLE_TLV("ADC Volume", VOL_CTRL0, ADCL_VC, ADCR_VC, >> + 0x7f, 0, a1_adc_vol_tlv), >> + SOC_SINGLE("ADC Filter Switch", BLOCK_EN, ADC_FILTER_EN, 1, 0), >> + SOC_ENUM("ADC Filter Mode", a1_adc_filter_mode), >> + SOC_SINGLE("ADC Mic Bias Switch", LINEIN_CFG, MICBIAS_EN, 1, 0), >> + SOC_ENUM("ADC Mic Bias Level", a1_adc_mic_bias_level), >> + SOC_SINGLE("ADC DEM Switch", BLOCK_EN, ADC_DEM_EN, 1, 0), >> + SOC_DOUBLE_TLV("ADC PGA Volume", VOL_CTRL0, PGAR_VC, PGAL_VC, >> + 0x1f, 0, a1_adc_pga_vol_tlv), >> + SOC_DOUBLE("ADC PGA Zero Cross-detection Switch", BLOCK_EN, >> + PGAL_ZCD_EN, PGAR_ZCD_EN, 1, 0), >> +}; >> + >> +static const struct snd_soc_dapm_widget a1_t9015_dapm_widgets[] = { >> + SND_SOC_DAPM_AIF_IN("Right IN", NULL, 0, SND_SOC_NOPM, 0, 0), >> + SND_SOC_DAPM_AIF_IN("Left IN", NULL, 0, SND_SOC_NOPM, 0, 0), >> + SND_SOC_DAPM_MUX("Right DAC Sel", SND_SOC_NOPM, 0, 0, >> + &t9015_right_dac_mux), >> + SND_SOC_DAPM_MUX("Left DAC Sel", SND_SOC_NOPM, 0, 0, >> + &t9015_left_dac_mux), >> + SND_SOC_DAPM_DAC("Right DAC", NULL, BLOCK_EN, DACR_EN, 0), >> + SND_SOC_DAPM_DAC("Left DAC", NULL, BLOCK_EN, DACL_EN, 0), >> + SND_SOC_DAPM_MUX("Right+ Driver Sel", SND_SOC_NOPM, 0, 0, >> + &a1_right_driver_mux), >> + SND_SOC_DAPM_MUX("Left+ Driver Sel", SND_SOC_NOPM, 0, 0, >> + &a1_left_driver_mux), >> + SND_SOC_DAPM_OUT_DRV("Right+ Driver", BLOCK_EN, LORP_EN, 0, NULL, 0), >> + SND_SOC_DAPM_OUT_DRV("Left+ Driver", BLOCK_EN, LOLP_EN, 0, NULL, 0), >> + SND_SOC_DAPM_OUTPUT("LORP"), >> + SND_SOC_DAPM_OUTPUT("LOLP"), >> + >> + SND_SOC_DAPM_INPUT("ADC IN Right"), >> + SND_SOC_DAPM_INPUT("ADC IN Left"), >> + SND_SOC_DAPM_MUX("ADC PGA Right Sel", SND_SOC_NOPM, 0, 0, >> + &a1_adc_pga_right_mux), >> + SND_SOC_DAPM_MUX("ADC PGA Left Sel", SND_SOC_NOPM, 0, 0, >> + &a1_adc_pga_left_mux), >> + SND_SOC_DAPM_PGA("ADC PGA Right", BLOCK_EN, PGAR_EN, 0, NULL, 0), >> + SND_SOC_DAPM_PGA("ADC PGA Left", BLOCK_EN, PGAL_EN, 0, NULL, 0), >> + SND_SOC_DAPM_ADC("ADC Right", NULL, BLOCK_EN, ADCR_EN, 0), >> + SND_SOC_DAPM_ADC("ADC Left", NULL, BLOCK_EN, ADCL_EN, 0), >> + SND_SOC_DAPM_MUX("ADC Right Sel", SND_SOC_NOPM, 0, 0, &a1_adc_right_mux), >> + SND_SOC_DAPM_MUX("ADC Left Sel", SND_SOC_NOPM, 0, 0, &a1_adc_left_mux), >> + SND_SOC_DAPM_AIF_OUT("ADC OUT Right", NULL, 0, SND_SOC_NOPM, 0, 0), >> + SND_SOC_DAPM_AIF_OUT("ADC OUT Left", NULL, 0, SND_SOC_NOPM, 0, 0), >> +}; >> + >> +static const struct snd_soc_dapm_route a1_t9015_dapm_routes[] = { >> + { "Right IN", NULL, "Playback" }, >> + { "Left IN", NULL, "Playback" }, >> + { "Right DAC Sel", "Right", "Right IN" }, >> + { "Right DAC Sel", "Left", "Left IN" }, >> + { "Left DAC Sel", "Right", "Right IN" }, >> + { "Left DAC Sel", "Left", "Left IN" }, >> + { "Right DAC", NULL, "Right DAC Sel" }, >> + { "Left DAC", NULL, "Left DAC Sel" }, >> + { "Right+ Driver Sel", "Right DAC", "Right DAC" }, >> + { "Right+ Driver Sel", "Left DAC Inverted", "Right DAC" }, >> + { "Left+ Driver Sel", "Left DAC", "Left DAC" }, >> + { "Left+ Driver Sel", "Right DAC Inverted", "Left DAC" }, >> + { "Right+ Driver", NULL, "Right+ Driver Sel" }, >> + { "Left+ Driver", NULL, "Left+ Driver Sel" }, >> + { "LORP", NULL, "Right+ Driver", }, >> + { "LOLP", NULL, "Left+ Driver", }, >> + >> + { "ADC PGA Right Sel", "Differential", "ADC IN Right" }, >> + { "ADC PGA Right Sel", "Positive", "ADC IN Right" }, >> + { "ADC PGA Right Sel", "Negative", "ADC IN Right" }, >> + { "ADC PGA Left Sel", "Differential", "ADC IN Left" }, >> + { "ADC PGA Left Sel", "Positive", "ADC IN Left" }, >> + { "ADC PGA Left Sel", "Negative", "ADC IN Left" }, >> + { "ADC PGA Right", NULL, "ADC PGA Right Sel" }, >> + { "ADC PGA Left", NULL, "ADC PGA Left Sel" }, >> + { "ADC Right", NULL, "ADC PGA Right" }, >> + { "ADC Left", NULL, "ADC PGA Left" }, >> + { "ADC Right Sel", "Right", "ADC Right" }, >> + { "ADC Right Sel", "Left", "ADC Left" }, >> + { "ADC Left Sel", "Right", "ADC Right" }, >> + { "ADC Left Sel", "Left", "ADC Left" }, >> + { "ADC OUT Right", NULL, "ADC Right Sel" }, >> + { "ADC OUT Left", NULL, "ADC Left Sel" }, >> + { "Capture", NULL, "ADC OUT Right" }, >> + { "Capture", NULL, "ADC OUT Left" }, >> +}; >> + >> static int t9015_set_bias_level(struct snd_soc_component *component, >> enum snd_soc_bias_level level) >> { >> @@ -241,6 +465,18 @@ static int t9015_component_probe(struct snd_soc_component *component) >> return 0; >> } >> >> +static int a1_t9015_component_probe(struct snd_soc_component *component) >> +{ >> + /* >> + * This configuration was stealed from original Amlogic's driver to >> + * reproduce the behavior of the driver more accurately. However, it is >> + * not known for certain what it actually affects. >> + */ >> + snd_soc_component_write(component, POWER_CFG, 0x00010000); >> + >> + return 0; >> +} >> + >> static const struct snd_soc_component_driver t9015_codec_driver = { >> .probe = t9015_component_probe, >> .set_bias_level = t9015_set_bias_level, >> @@ -254,6 +490,19 @@ static const struct snd_soc_component_driver t9015_codec_driver = { >> .endianness = 1, >> }; >> >> +static const struct snd_soc_component_driver a1_t9015_codec_driver = { >> + .probe = a1_t9015_component_probe, >> + .set_bias_level = t9015_set_bias_level, >> + .controls = a1_t9015_snd_controls, >> + .num_controls = ARRAY_SIZE(a1_t9015_snd_controls), >> + .dapm_widgets = a1_t9015_dapm_widgets, >> + .num_dapm_widgets = ARRAY_SIZE(a1_t9015_dapm_widgets), >> + .dapm_routes = a1_t9015_dapm_routes, >> + .num_dapm_routes = ARRAY_SIZE(a1_t9015_dapm_routes), >> + .suspend_bias_off = 1, >> + .endianness = 1, >> +}; >> + >> static int t9015_probe(struct platform_device *pdev) >> { >> struct device *dev = &pdev->dev; >> @@ -315,11 +564,21 @@ static const struct t9015_match_data t9015_match_data = { >> .max_register = POWER_CFG, >> }; >> >> +static const struct t9015_match_data a1_t9015_match_data = { >> + .component_drv = &a1_t9015_codec_driver, >> + .dai_drv = &a1_t9015_dai, >> + .max_register = LINEIN_CFG, >> +}; >> + >> static const struct of_device_id t9015_ids[] __maybe_unused = { >> { >> .compatible = "amlogic,t9015", >> .data = &t9015_match_data, >> }, >> + { >> + .compatible = "amlogic,t9015-a1", >> + .data = &a1_t9015_match_data, >> + }, >> { } >> }; >> MODULE_DEVICE_TABLE(of, t9015_ids); > >
diff --git a/sound/soc/meson/t9015.c b/sound/soc/meson/t9015.c index 48f6767bd858..365955bfeb78 100644 --- a/sound/soc/meson/t9015.c +++ b/sound/soc/meson/t9015.c @@ -19,16 +19,33 @@ #define LOLP_EN 3 #define DACR_EN 4 #define DACL_EN 5 +#define ADCR_EN 6 +#define ADCL_EN 7 +#define PGAR_ZCD_EN 8 +#define PGAL_ZCD_EN 9 +#define PGAR_EN 10 +#define PGAL_EN 11 +#define ADCR_INV 16 +#define ADCL_INV 17 +#define ADCR_SRC 18 +#define ADCL_SRC 19 #define DACR_INV 20 #define DACL_INV 21 #define DACR_SRC 22 #define DACL_SRC 23 +#define ADC_DEM_EN 26 +#define ADC_FILTER_MODE 28 +#define ADC_FILTER_EN 29 #define REFP_BUF_EN BIT(12) #define BIAS_CURRENT_EN BIT(13) #define VMID_GEN_FAST BIT(14) #define VMID_GEN_EN BIT(15) #define I2S_MODE BIT(30) #define VOL_CTRL0 0x04 +#define PGAR_VC 0 +#define PGAL_VC 8 +#define ADCR_VC 16 +#define ADCL_VC 24 #define GAIN_H 31 #define GAIN_L 23 #define VOL_CTRL1 0x08 @@ -46,6 +63,28 @@ #define LOLN_POL 8 #define LOLP_POL 12 #define POWER_CFG 0x10 +#define LINEIN_CFG 0x14 +#define MICBIAS_LEVEL 0 +#define MICBIAS_EN 3 +#define PGAR_CTVMN 8 +#define PGAR_CTVMP 9 +#define PGAL_CTVMN 10 +#define PGAL_CTVMP 11 +#define PGAR_CTVIN 12 +#define PGAR_CTVIP 13 +#define PGAL_CTVIN 14 +#define PGAL_CTVIP 15 + +#define PGAR_MASK (BIT(PGAR_CTVMP) | BIT(PGAR_CTVMN) | \ + BIT(PGAR_CTVIP) | BIT(PGAR_CTVIN)) +#define PGAR_DIFF (BIT(PGAR_CTVIP) | BIT(PGAR_CTVIN)) +#define PGAR_POSITIVE (BIT(PGAR_CTVIP) | BIT(PGAR_CTVMN)) +#define PGAR_NEGATIVE (BIT(PGAR_CTVIN) | BIT(PGAR_CTVMP)) +#define PGAL_MASK (BIT(PGAL_CTVMP) | BIT(PGAL_CTVMN) | \ + BIT(PGAL_CTVIP) | BIT(PGAL_CTVIN)) +#define PGAL_DIFF (BIT(PGAL_CTVIP) | BIT(PGAL_CTVIN)) +#define PGAL_POSITIVE (BIT(PGAL_CTVIP) | BIT(PGAL_CTVMN)) +#define PGAL_NEGATIVE (BIT(PGAL_CTVIN) | BIT(PGAL_CTVMP)) struct t9015 { struct regulator *avdd; @@ -103,6 +142,31 @@ static struct snd_soc_dai_driver t9015_dai = { .ops = &t9015_dai_ops, }; +static struct snd_soc_dai_driver a1_t9015_dai = { + .name = "t9015-hifi", + .playback = { + .stream_name = "Playback", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = (SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S20_LE | + SNDRV_PCM_FMTBIT_S24_LE), + }, + .capture = { + .stream_name = "Capture", + .channels_min = 1, + .channels_max = 2, + .rates = SNDRV_PCM_RATE_8000_96000, + .formats = (SNDRV_PCM_FMTBIT_S8 | + SNDRV_PCM_FMTBIT_S16_LE | + SNDRV_PCM_FMTBIT_S20_LE | + SNDRV_PCM_FMTBIT_S24_LE), + }, + .ops = &t9015_dai_ops, +}; + static const DECLARE_TLV_DB_MINMAX_MUTE(dac_vol_tlv, -9525, 0); static const char * const ramp_rate_txt[] = { "Fast", "Slow" }; @@ -179,6 +243,166 @@ static const struct snd_soc_dapm_route t9015_dapm_routes[] = { { "LOLP", NULL, "Left+ Driver", }, }; +static const char * const a1_right_driver_txt[] = { "None", "Right DAC", + "Left DAC Inverted" }; +static const unsigned int a1_right_driver_values[] = { 0, 2, 4 }; + +static const char * const a1_left_driver_txt[] = { "None", "Left DAC", + "Right DAC Inverted" }; +static const unsigned int a1_left_driver_values[] = { 0, 2, 4 }; + +static SOC_VALUE_ENUM_SINGLE_DECL(a1_right_driver, LINEOUT_CFG, 12, 0x7, + a1_right_driver_txt, a1_right_driver_values); +static SOC_VALUE_ENUM_SINGLE_DECL(a1_left_driver, LINEOUT_CFG, 4, 0x7, + a1_left_driver_txt, a1_left_driver_values); + +static const struct snd_kcontrol_new a1_right_driver_mux = + SOC_DAPM_ENUM("Right Driver+ Source", a1_right_driver); +static const struct snd_kcontrol_new a1_left_driver_mux = + SOC_DAPM_ENUM("Left Driver+ Source", a1_left_driver); + +static const DECLARE_TLV_DB_MINMAX_MUTE(a1_adc_vol_tlv, -29625, 0); +static const DECLARE_TLV_DB_MINMAX_MUTE(a1_adc_pga_vol_tlv, -1200, 0); + +static const char * const a1_adc_right_txt[] = { "Right", "Left" }; +static SOC_ENUM_SINGLE_DECL(a1_adc_right, BLOCK_EN, ADCR_SRC, a1_adc_right_txt); + +static const char * const a1_adc_left_txt[] = { "Left", "Right" }; +static SOC_ENUM_SINGLE_DECL(a1_adc_left, BLOCK_EN, ADCL_SRC, a1_adc_left_txt); + +static const struct snd_kcontrol_new a1_adc_right_mux = + SOC_DAPM_ENUM("ADC Right Source", a1_adc_right); +static const struct snd_kcontrol_new a1_adc_left_mux = + SOC_DAPM_ENUM("ADC Left Source", a1_adc_left); + +static const char * const a1_adc_filter_mode_txt[] = { "Voice", "HiFi"}; +static SOC_ENUM_SINGLE_DECL(a1_adc_filter_mode, BLOCK_EN, ADC_FILTER_MODE, + a1_adc_filter_mode_txt); + +static const char * const a1_adc_mic_bias_level_txt[] = { "2.0V", "2.1V", + "2.3V", "2.5V", "2.8V" }; +static const unsigned int a1_adc_mic_bias_level_values[] = { 0, 1, 2, 3, 7 }; +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_mic_bias_level, + LINEIN_CFG, MICBIAS_LEVEL, 0x7, + a1_adc_mic_bias_level_txt, + a1_adc_mic_bias_level_values); + +static const char * const a1_adc_pga_txt[] = { "None", "Differential", + "Positive", "Negative" }; +static const unsigned int a1_adc_pga_right_values[] = { 0, PGAR_DIFF, + PGAR_POSITIVE, PGAR_NEGATIVE }; +static const unsigned int a1_adc_pga_left_values[] = { 0, PGAL_DIFF, + PGAL_POSITIVE, PGAL_NEGATIVE }; + +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_pga_right, LINEIN_CFG, 0, PGAR_MASK, + a1_adc_pga_txt, a1_adc_pga_right_values); +static SOC_VALUE_ENUM_SINGLE_DECL(a1_adc_pga_left, LINEIN_CFG, 0, PGAL_MASK, + a1_adc_pga_txt, a1_adc_pga_left_values); + +static const struct snd_kcontrol_new a1_adc_pga_right_mux = + SOC_DAPM_ENUM("ADC PGA Right Source", a1_adc_pga_right); +static const struct snd_kcontrol_new a1_adc_pga_left_mux = + SOC_DAPM_ENUM("ADC PGA Left Source", a1_adc_pga_left); + +static const struct snd_kcontrol_new a1_t9015_snd_controls[] = { + /* Volume Controls */ + SOC_ENUM("Playback Channel Mode", mono_enum), + SOC_SINGLE("Playback Switch", VOL_CTRL1, DAC_SOFT_MUTE, 1, 1), + SOC_DOUBLE_TLV("Playback Volume", VOL_CTRL1, DACL_VC, DACR_VC, + 0xff, 0, dac_vol_tlv), + + /* Ramp Controls */ + SOC_ENUM("Ramp Rate", ramp_rate_enum), + SOC_SINGLE("Volume Ramp Switch", VOL_CTRL1, VC_RAMP_MODE, 1, 0), + SOC_SINGLE("Mute Ramp Switch", VOL_CTRL1, MUTE_MODE, 1, 0), + SOC_SINGLE("Unmute Ramp Switch", VOL_CTRL1, UNMUTE_MODE, 1, 0), + + /* ADC Controls */ + SOC_DOUBLE_TLV("ADC Volume", VOL_CTRL0, ADCL_VC, ADCR_VC, + 0x7f, 0, a1_adc_vol_tlv), + SOC_SINGLE("ADC Filter Switch", BLOCK_EN, ADC_FILTER_EN, 1, 0), + SOC_ENUM("ADC Filter Mode", a1_adc_filter_mode), + SOC_SINGLE("ADC Mic Bias Switch", LINEIN_CFG, MICBIAS_EN, 1, 0), + SOC_ENUM("ADC Mic Bias Level", a1_adc_mic_bias_level), + SOC_SINGLE("ADC DEM Switch", BLOCK_EN, ADC_DEM_EN, 1, 0), + SOC_DOUBLE_TLV("ADC PGA Volume", VOL_CTRL0, PGAR_VC, PGAL_VC, + 0x1f, 0, a1_adc_pga_vol_tlv), + SOC_DOUBLE("ADC PGA Zero Cross-detection Switch", BLOCK_EN, + PGAL_ZCD_EN, PGAR_ZCD_EN, 1, 0), +}; + +static const struct snd_soc_dapm_widget a1_t9015_dapm_widgets[] = { + SND_SOC_DAPM_AIF_IN("Right IN", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_IN("Left IN", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_MUX("Right DAC Sel", SND_SOC_NOPM, 0, 0, + &t9015_right_dac_mux), + SND_SOC_DAPM_MUX("Left DAC Sel", SND_SOC_NOPM, 0, 0, + &t9015_left_dac_mux), + SND_SOC_DAPM_DAC("Right DAC", NULL, BLOCK_EN, DACR_EN, 0), + SND_SOC_DAPM_DAC("Left DAC", NULL, BLOCK_EN, DACL_EN, 0), + SND_SOC_DAPM_MUX("Right+ Driver Sel", SND_SOC_NOPM, 0, 0, + &a1_right_driver_mux), + SND_SOC_DAPM_MUX("Left+ Driver Sel", SND_SOC_NOPM, 0, 0, + &a1_left_driver_mux), + SND_SOC_DAPM_OUT_DRV("Right+ Driver", BLOCK_EN, LORP_EN, 0, NULL, 0), + SND_SOC_DAPM_OUT_DRV("Left+ Driver", BLOCK_EN, LOLP_EN, 0, NULL, 0), + SND_SOC_DAPM_OUTPUT("LORP"), + SND_SOC_DAPM_OUTPUT("LOLP"), + + SND_SOC_DAPM_INPUT("ADC IN Right"), + SND_SOC_DAPM_INPUT("ADC IN Left"), + SND_SOC_DAPM_MUX("ADC PGA Right Sel", SND_SOC_NOPM, 0, 0, + &a1_adc_pga_right_mux), + SND_SOC_DAPM_MUX("ADC PGA Left Sel", SND_SOC_NOPM, 0, 0, + &a1_adc_pga_left_mux), + SND_SOC_DAPM_PGA("ADC PGA Right", BLOCK_EN, PGAR_EN, 0, NULL, 0), + SND_SOC_DAPM_PGA("ADC PGA Left", BLOCK_EN, PGAL_EN, 0, NULL, 0), + SND_SOC_DAPM_ADC("ADC Right", NULL, BLOCK_EN, ADCR_EN, 0), + SND_SOC_DAPM_ADC("ADC Left", NULL, BLOCK_EN, ADCL_EN, 0), + SND_SOC_DAPM_MUX("ADC Right Sel", SND_SOC_NOPM, 0, 0, &a1_adc_right_mux), + SND_SOC_DAPM_MUX("ADC Left Sel", SND_SOC_NOPM, 0, 0, &a1_adc_left_mux), + SND_SOC_DAPM_AIF_OUT("ADC OUT Right", NULL, 0, SND_SOC_NOPM, 0, 0), + SND_SOC_DAPM_AIF_OUT("ADC OUT Left", NULL, 0, SND_SOC_NOPM, 0, 0), +}; + +static const struct snd_soc_dapm_route a1_t9015_dapm_routes[] = { + { "Right IN", NULL, "Playback" }, + { "Left IN", NULL, "Playback" }, + { "Right DAC Sel", "Right", "Right IN" }, + { "Right DAC Sel", "Left", "Left IN" }, + { "Left DAC Sel", "Right", "Right IN" }, + { "Left DAC Sel", "Left", "Left IN" }, + { "Right DAC", NULL, "Right DAC Sel" }, + { "Left DAC", NULL, "Left DAC Sel" }, + { "Right+ Driver Sel", "Right DAC", "Right DAC" }, + { "Right+ Driver Sel", "Left DAC Inverted", "Right DAC" }, + { "Left+ Driver Sel", "Left DAC", "Left DAC" }, + { "Left+ Driver Sel", "Right DAC Inverted", "Left DAC" }, + { "Right+ Driver", NULL, "Right+ Driver Sel" }, + { "Left+ Driver", NULL, "Left+ Driver Sel" }, + { "LORP", NULL, "Right+ Driver", }, + { "LOLP", NULL, "Left+ Driver", }, + + { "ADC PGA Right Sel", "Differential", "ADC IN Right" }, + { "ADC PGA Right Sel", "Positive", "ADC IN Right" }, + { "ADC PGA Right Sel", "Negative", "ADC IN Right" }, + { "ADC PGA Left Sel", "Differential", "ADC IN Left" }, + { "ADC PGA Left Sel", "Positive", "ADC IN Left" }, + { "ADC PGA Left Sel", "Negative", "ADC IN Left" }, + { "ADC PGA Right", NULL, "ADC PGA Right Sel" }, + { "ADC PGA Left", NULL, "ADC PGA Left Sel" }, + { "ADC Right", NULL, "ADC PGA Right" }, + { "ADC Left", NULL, "ADC PGA Left" }, + { "ADC Right Sel", "Right", "ADC Right" }, + { "ADC Right Sel", "Left", "ADC Left" }, + { "ADC Left Sel", "Right", "ADC Right" }, + { "ADC Left Sel", "Left", "ADC Left" }, + { "ADC OUT Right", NULL, "ADC Right Sel" }, + { "ADC OUT Left", NULL, "ADC Left Sel" }, + { "Capture", NULL, "ADC OUT Right" }, + { "Capture", NULL, "ADC OUT Left" }, +}; + static int t9015_set_bias_level(struct snd_soc_component *component, enum snd_soc_bias_level level) { @@ -241,6 +465,18 @@ static int t9015_component_probe(struct snd_soc_component *component) return 0; } +static int a1_t9015_component_probe(struct snd_soc_component *component) +{ + /* + * This configuration was stealed from original Amlogic's driver to + * reproduce the behavior of the driver more accurately. However, it is + * not known for certain what it actually affects. + */ + snd_soc_component_write(component, POWER_CFG, 0x00010000); + + return 0; +} + static const struct snd_soc_component_driver t9015_codec_driver = { .probe = t9015_component_probe, .set_bias_level = t9015_set_bias_level, @@ -254,6 +490,19 @@ static const struct snd_soc_component_driver t9015_codec_driver = { .endianness = 1, }; +static const struct snd_soc_component_driver a1_t9015_codec_driver = { + .probe = a1_t9015_component_probe, + .set_bias_level = t9015_set_bias_level, + .controls = a1_t9015_snd_controls, + .num_controls = ARRAY_SIZE(a1_t9015_snd_controls), + .dapm_widgets = a1_t9015_dapm_widgets, + .num_dapm_widgets = ARRAY_SIZE(a1_t9015_dapm_widgets), + .dapm_routes = a1_t9015_dapm_routes, + .num_dapm_routes = ARRAY_SIZE(a1_t9015_dapm_routes), + .suspend_bias_off = 1, + .endianness = 1, +}; + static int t9015_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -315,11 +564,21 @@ static const struct t9015_match_data t9015_match_data = { .max_register = POWER_CFG, }; +static const struct t9015_match_data a1_t9015_match_data = { + .component_drv = &a1_t9015_codec_driver, + .dai_drv = &a1_t9015_dai, + .max_register = LINEIN_CFG, +}; + static const struct of_device_id t9015_ids[] __maybe_unused = { { .compatible = "amlogic,t9015", .data = &t9015_match_data, }, + { + .compatible = "amlogic,t9015-a1", + .data = &a1_t9015_match_data, + }, { } }; MODULE_DEVICE_TABLE(of, t9015_ids);
A1's internal codec is very close to t9015. The main difference, that it has ADC. This commit introduces support for capturing from it. Signed-off-by: Jan Dakinevich <jan.dakinevich@salutedevices.com> --- sound/soc/meson/t9015.c | 259 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 259 insertions(+)