| Message ID | 20230320154841.327908-16-brgl@bgdev.pl |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: qcom: sa8775p: add basic PMIC support | expand |
On 20.03.2023 16:48, Bartosz Golaszewski wrote: > From: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > > Add GPIO controller nodes to PMICs that have the GPIO hooked up on > sa8775p-ride. > > Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org> > --- Only on 2 out of 4 SIDs? Konrad > arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi | 20 ++++++++++++++++++++ > 1 file changed, 20 insertions(+) > > diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi > index 276070b62ccd..574c20caf9eb 100644 > --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi > +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi > @@ -78,6 +78,16 @@ pmm8654au_0_pon_resin: resin { > status = "disabled"; > }; > }; > + > + pmm8654au_0_gpios: gpio@8800 { > + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; > + reg = <0x8800>; > + gpio-controller; > + gpio-ranges = <&pmm8654au_0_gpios 0 0 12>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > }; > > pmm8654au_1: pmic@2 { > @@ -99,6 +109,16 @@ pmm8654au_2: pmic@4 { > reg = <0x4 SPMI_USID>; > #address-cells = <1>; > #size-cells = <0>; > + > + pmm8654au_2_gpios: gpio@8800 { > + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; > + reg = <0x8800>; > + gpio-controller; > + gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; > + #gpio-cells = <2>; > + interrupt-controller; > + #interrupt-cells = <2>; > + }; > }; > > pmm8654au_3: pmic@6 {
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi index 276070b62ccd..574c20caf9eb 100644 --- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi +++ b/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi @@ -78,6 +78,16 @@ pmm8654au_0_pon_resin: resin { status = "disabled"; }; }; + + pmm8654au_0_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_0_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmm8654au_1: pmic@2 { @@ -99,6 +109,16 @@ pmm8654au_2: pmic@4 { reg = <0x4 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; + + pmm8654au_2_gpios: gpio@8800 { + compatible = "qcom,pmm8654au-gpio", "qcom,spmi-gpio"; + reg = <0x8800>; + gpio-controller; + gpio-ranges = <&pmm8654au_2_gpios 0 0 12>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; pmm8654au_3: pmic@6 {