| Message ID | 20230315215027.30685-2-asmaa@nvidia.com |
|---|---|
| State | New |
| Headers | show |
| Series | Support Nvidia BlueField-3 GPIO driver and pin controller | expand |
On Wed, Mar 15, 2023 at 11:50 PM Asmaa Mnebhi <asmaa@nvidia.com> wrote: > > Add support for the BlueField-3 SoC GPIO driver. > This driver configures and handles GPIO interrupts. It also enables a user > to manipulate certain GPIO pins via libgpiod tools or other kernel drivers. > The usables pins are defined via the "gpio-reserved-ranges" property. Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> > Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> > --- > drivers/gpio/Kconfig | 13 ++ > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-mlxbf3.c | 248 +++++++++++++++++++++++++++++++++++++ > 3 files changed, 262 insertions(+) > create mode 100644 drivers/gpio/gpio-mlxbf3.c > > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index ec7cfd4f52b1..beec1f6c34ff 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -1534,6 +1534,19 @@ config GPIO_MLXBF2 > help > Say Y here if you want GPIO support on Mellanox BlueField 2 SoC. > > +config GPIO_MLXBF3 > + tristate "Mellanox BlueField 3 SoC GPIO" > + depends on (MELLANOX_PLATFORM && ARM64) || COMPILE_TEST > + select GPIO_GENERIC > + select GPIOLIB_IRQCHIP > + help > + Say Y if you want GPIO support on Mellanox BlueField 3 SoC. > + This GPIO controller supports interrupt handling and enables the > + manipulation of certain GPIO pins. > + This controller should be used in parallel with pinctrl-mlxbf3 to > + control the desired GPIOs. > + This driver can also be built as a module called mlxbf3-gpio. > + > config GPIO_ML_IOH > tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" > depends on X86 || COMPILE_TEST > diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile > index 010587025fc8..76545ca31457 100644 > --- a/drivers/gpio/Makefile > +++ b/drivers/gpio/Makefile > @@ -101,6 +101,7 @@ obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o > obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o > obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o > obj-$(CONFIG_GPIO_MLXBF2) += gpio-mlxbf2.o > +obj-$(CONFIG_GPIO_MLXBF3) += gpio-mlxbf3.o > obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o > obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o > obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o > diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c > new file mode 100644 > index 000000000000..e30cee108986 > --- /dev/null > +++ b/drivers/gpio/gpio-mlxbf3.c > @@ -0,0 +1,248 @@ > +// SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause > +/* Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES */ > + > +#include <linux/bitfield.h> > +#include <linux/bitops.h> > +#include <linux/device.h> > +#include <linux/err.h> > +#include <linux/gpio/driver.h> > +#include <linux/interrupt.h> > +#include <linux/io.h> > +#include <linux/module.h> > +#include <linux/platform_device.h> > +#include <linux/spinlock.h> > +#include <linux/types.h> > + > +/* > + * There are 2 YU GPIO blocks: > + * gpio[0]: HOST_GPIO0->HOST_GPIO31 > + * gpio[1]: HOST_GPIO32->HOST_GPIO55 > + */ > +#define MLXBF3_GPIO_MAX_PINS_PER_BLOCK 32 > + > +/* > + * fw_gpio[x] block registers and their offset > + */ > +#define MLXBF_GPIO_FW_OUTPUT_ENABLE_SET 0x00 > +#define MLXBF_GPIO_FW_DATA_OUT_SET 0x04 > + > +#define MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR 0x00 > +#define MLXBF_GPIO_FW_DATA_OUT_CLEAR 0x04 > + > +#define MLXBF_GPIO_CAUSE_RISE_EN 0x00 > +#define MLXBF_GPIO_CAUSE_FALL_EN 0x04 > +#define MLXBF_GPIO_READ_DATA_IN 0x08 > + > +#define MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x00 > +#define MLXBF_GPIO_CAUSE_OR_EVTEN0 0x14 > +#define MLXBF_GPIO_CAUSE_OR_CLRCAUSE 0x18 > + > +struct mlxbf3_gpio_context { > + struct gpio_chip gc; > + > + /* YU GPIO block address */ > + void __iomem *gpio_set_io; > + void __iomem *gpio_clr_io; > + void __iomem *gpio_io; > + > + /* YU GPIO cause block address */ > + void __iomem *gpio_cause_io; > +}; > + > +static void mlxbf3_gpio_irq_enable(struct irq_data *irqd) > +{ > + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); > + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); > + irq_hw_number_t offset = irqd_to_hwirq(irqd); > + unsigned long flags; > + u32 val; > + > + gpiochip_enable_irq(gc, offset); > + > + raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); > + writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); > + > + val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); > + val |= BIT(offset); > + writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); > + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); > +} > + > +static void mlxbf3_gpio_irq_disable(struct irq_data *irqd) > +{ > + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); > + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); > + irq_hw_number_t offset = irqd_to_hwirq(irqd); > + unsigned long flags; > + u32 val; > + > + raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); > + val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); > + val &= ~BIT(offset); > + writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); > + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); > + > + gpiochip_disable_irq(gc, offset); > +} > + > +static irqreturn_t mlxbf3_gpio_irq_handler(int irq, void *ptr) > +{ > + struct mlxbf3_gpio_context *gs = ptr; > + struct gpio_chip *gc = &gs->gc; > + unsigned long pending; > + u32 level; > + > + pending = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0); > + writel(pending, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); > + > + for_each_set_bit(level, &pending, gc->ngpio) > + generic_handle_domain_irq(gc->irq.domain, level); > + > + return IRQ_RETVAL(pending); > +} > + > +static int > +mlxbf3_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) > +{ > + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); > + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); > + irq_hw_number_t offset = irqd_to_hwirq(irqd); > + unsigned long flags; > + u32 val; > + > + raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); > + > + switch (type & IRQ_TYPE_SENSE_MASK) { > + case IRQ_TYPE_EDGE_BOTH: > + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); > + val |= BIT(offset); > + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); > + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); > + val |= BIT(offset); > + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); > + break; > + case IRQ_TYPE_EDGE_RISING: > + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); > + val |= BIT(offset); > + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); > + break; > + case IRQ_TYPE_EDGE_FALLING: > + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); > + val |= BIT(offset); > + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); > + break; > + default: > + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); > + return -EINVAL; > + } > + > + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); > + > + irq_set_handler_locked(irqd, handle_edge_irq); > + > + return 0; > +} > + > +/* This function needs to be defined for handle_edge_irq() */ > +static void mlxbf3_gpio_irq_ack(struct irq_data *data) > +{ > +} > + > +static const struct irq_chip gpio_mlxbf3_irqchip = { > + .name = "MLNXBF33", > + .irq_ack = mlxbf3_gpio_irq_ack, > + .irq_set_type = mlxbf3_gpio_irq_set_type, > + .irq_enable = mlxbf3_gpio_irq_enable, > + .irq_disable = mlxbf3_gpio_irq_disable, > + .flags = IRQCHIP_IMMUTABLE, > + GPIOCHIP_IRQ_RESOURCE_HELPERS, > +}; > + > +static int mlxbf3_gpio_probe(struct platform_device *pdev) > +{ > + struct device *dev = &pdev->dev; > + struct mlxbf3_gpio_context *gs; > + struct gpio_irq_chip *girq; > + struct gpio_chip *gc; > + int ret, irq; > + > + gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL); > + if (!gs) > + return -ENOMEM; > + > + gs->gpio_io = devm_platform_ioremap_resource(pdev, 0); > + if (IS_ERR(gs->gpio_io)) > + return PTR_ERR(gs->gpio_io); > + > + gs->gpio_cause_io = devm_platform_ioremap_resource(pdev, 1); > + if (IS_ERR(gs->gpio_cause_io)) > + return PTR_ERR(gs->gpio_cause_io); > + > + gs->gpio_set_io = devm_platform_ioremap_resource(pdev, 2); > + if (IS_ERR(gs->gpio_set_io)) > + return PTR_ERR(gs->gpio_set_io); > + > + gs->gpio_clr_io = devm_platform_ioremap_resource(pdev, 3); > + if (IS_ERR(gs->gpio_clr_io)) > + return PTR_ERR(gs->gpio_clr_io); > + gc = &gs->gc; > + > + ret = bgpio_init(gc, dev, 4, > + gs->gpio_io + MLXBF_GPIO_READ_DATA_IN, > + gs->gpio_set_io + MLXBF_GPIO_FW_DATA_OUT_SET, > + gs->gpio_clr_io + MLXBF_GPIO_FW_DATA_OUT_CLEAR, > + gs->gpio_set_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_SET, > + gs->gpio_clr_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR, 0); > + > + gc->request = gpiochip_generic_request; > + gc->free = gpiochip_generic_free; > + gc->owner = THIS_MODULE; > + > + irq = platform_get_irq(pdev, 0); > + if (irq >= 0) { > + girq = &gs->gc.irq; > + gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip); > + girq->default_type = IRQ_TYPE_NONE; > + /* This will let us handle the parent IRQ in the driver */ > + girq->num_parents = 0; > + girq->parents = NULL; > + girq->parent_handler = NULL; > + girq->handler = handle_bad_irq; > + > + /* > + * Directly request the irq here instead of passing > + * a flow-handler because the irq is shared. > + */ > + ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler, > + IRQF_SHARED, dev_name(dev), gs); > + if (ret) > + return dev_err_probe(dev, ret, "failed to request IRQ"); > + } > + > + platform_set_drvdata(pdev, gs); > + > + ret = devm_gpiochip_add_data(dev, &gs->gc, gs); > + if (ret) > + dev_err_probe(dev, ret, "Failed adding memory mapped gpiochip\n"); > + > + return 0; > +} > + > +static const struct acpi_device_id mlxbf3_gpio_acpi_match[] = { > + { "MLNXBF33", 0 }, > + {} > +}; > +MODULE_DEVICE_TABLE(acpi, mlxbf3_gpio_acpi_match); > + > +static struct platform_driver mlxbf3_gpio_driver = { > + .driver = { > + .name = "mlxbf3_gpio", > + .acpi_match_table = mlxbf3_gpio_acpi_match, > + }, > + .probe = mlxbf3_gpio_probe, > +}; > +module_platform_driver(mlxbf3_gpio_driver); > + > +MODULE_DESCRIPTION("NVIDIA BlueField-3 GPIO Driver"); > +MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>"); > +MODULE_LICENSE("Dual BSD/GPL"); > -- > 2.30.1 >
On Wed, Mar 15, 2023 at 10:50 PM Asmaa Mnebhi <asmaa@nvidia.com> wrote: > Add support for the BlueField-3 SoC GPIO driver. > This driver configures and handles GPIO interrupts. It also enables a user > to manipulate certain GPIO pins via libgpiod tools or other kernel drivers. > The usables pins are defined via the "gpio-reserved-ranges" property. > > Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Yours, Linus Walleij
Hi Andy, Hi Linus, I see that the pinctl-mlxbf3.c is in v6.4 kernel but I am not seeing gpio-mlxbf3.c, not even in Linux next. Do you know when this driver will be integrated? Thanks. Asmaa > -----Original Message----- > From: Andy Shevchenko <andy.shevchenko@gmail.com> > Sent: Friday, March 17, 2023 8:54 AM > To: Asmaa Mnebhi <asmaa@nvidia.com> > Cc: linus.walleij@linaro.org; bgolaszewski@baylibre.com; linux- > gpio@vger.kernel.org; linux-kernel@vger.kernel.org; linux- > acpi@vger.kernel.org > Subject: Re: [PATCH v6 1/2] gpio: mlxbf3: Add gpio driver support > Importance: High > > On Wed, Mar 15, 2023 at 11:50 PM Asmaa Mnebhi <asmaa@nvidia.com> > wrote: > > > > Add support for the BlueField-3 SoC GPIO driver. > > This driver configures and handles GPIO interrupts. It also enables a > > user to manipulate certain GPIO pins via libgpiod tools or other kernel > drivers. > > The usables pins are defined via the "gpio-reserved-ranges" property. > > Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> >
On Fri, May 26, 2023 at 3:49 PM Asmaa Mnebhi <asmaa@nvidia.com> wrote: > Hi Andy, Hi Linus, > > I see that the pinctl-mlxbf3.c is in v6.4 kernel but I am not seeing gpio-mlxbf3.c, not > even in Linux next. Do you know when this driver will be integrated? Bartosz is applying GPIO patches, I am sure he will get around to it once all things are reviewed, but you need to use the right email address to him (see MAINTAINERS). Yours, Linus Walleij
Thanks Linus! > On Fri, May 26, 2023 at 3:49 PM Asmaa Mnebhi <asmaa@nvidia.com> > wrote: > > > Hi Andy, Hi Linus, > > > > I see that the pinctl-mlxbf3.c is in v6.4 kernel but I am not seeing > > gpio-mlxbf3.c, not even in Linux next. Do you know when this driver will be > integrated? > > Bartosz is applying GPIO patches, I am sure he will get around to it once all > things are reviewed, but you need to use the right email address to him (see > MAINTAINERS). > > Yours, > Linus Walleij
On Wed, Mar 15, 2023 at 10:50 PM Asmaa Mnebhi <asmaa@nvidia.com> wrote: > > Add support for the BlueField-3 SoC GPIO driver. > This driver configures and handles GPIO interrupts. It also enables a user > to manipulate certain GPIO pins via libgpiod tools or other kernel drivers. > The usables pins are defined via the "gpio-reserved-ranges" property. > > Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> > --- Applied, thanks! Bart
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index ec7cfd4f52b1..beec1f6c34ff 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1534,6 +1534,19 @@ config GPIO_MLXBF2 help Say Y here if you want GPIO support on Mellanox BlueField 2 SoC. +config GPIO_MLXBF3 + tristate "Mellanox BlueField 3 SoC GPIO" + depends on (MELLANOX_PLATFORM && ARM64) || COMPILE_TEST + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say Y if you want GPIO support on Mellanox BlueField 3 SoC. + This GPIO controller supports interrupt handling and enables the + manipulation of certain GPIO pins. + This controller should be used in parallel with pinctrl-mlxbf3 to + control the desired GPIOs. + This driver can also be built as a module called mlxbf3-gpio. + config GPIO_ML_IOH tristate "OKI SEMICONDUCTOR ML7213 IOH GPIO support" depends on X86 || COMPILE_TEST diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 010587025fc8..76545ca31457 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -101,6 +101,7 @@ obj-$(CONFIG_GPIO_MERRIFIELD) += gpio-merrifield.o obj-$(CONFIG_GPIO_ML_IOH) += gpio-ml-ioh.o obj-$(CONFIG_GPIO_MLXBF) += gpio-mlxbf.o obj-$(CONFIG_GPIO_MLXBF2) += gpio-mlxbf2.o +obj-$(CONFIG_GPIO_MLXBF3) += gpio-mlxbf3.o obj-$(CONFIG_GPIO_MM_LANTIQ) += gpio-mm-lantiq.o obj-$(CONFIG_GPIO_MOCKUP) += gpio-mockup.o obj-$(CONFIG_GPIO_MOXTET) += gpio-moxtet.o diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c new file mode 100644 index 000000000000..e30cee108986 --- /dev/null +++ b/drivers/gpio/gpio-mlxbf3.c @@ -0,0 +1,248 @@ +// SPDX-License-Identifier: GPL-2.0-only or BSD-3-Clause +/* Copyright (C) 2022 NVIDIA CORPORATION & AFFILIATES */ + +#include <linux/bitfield.h> +#include <linux/bitops.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/gpio/driver.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include <linux/types.h> + +/* + * There are 2 YU GPIO blocks: + * gpio[0]: HOST_GPIO0->HOST_GPIO31 + * gpio[1]: HOST_GPIO32->HOST_GPIO55 + */ +#define MLXBF3_GPIO_MAX_PINS_PER_BLOCK 32 + +/* + * fw_gpio[x] block registers and their offset + */ +#define MLXBF_GPIO_FW_OUTPUT_ENABLE_SET 0x00 +#define MLXBF_GPIO_FW_DATA_OUT_SET 0x04 + +#define MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR 0x00 +#define MLXBF_GPIO_FW_DATA_OUT_CLEAR 0x04 + +#define MLXBF_GPIO_CAUSE_RISE_EN 0x00 +#define MLXBF_GPIO_CAUSE_FALL_EN 0x04 +#define MLXBF_GPIO_READ_DATA_IN 0x08 + +#define MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0 0x00 +#define MLXBF_GPIO_CAUSE_OR_EVTEN0 0x14 +#define MLXBF_GPIO_CAUSE_OR_CLRCAUSE 0x18 + +struct mlxbf3_gpio_context { + struct gpio_chip gc; + + /* YU GPIO block address */ + void __iomem *gpio_set_io; + void __iomem *gpio_clr_io; + void __iomem *gpio_io; + + /* YU GPIO cause block address */ + void __iomem *gpio_cause_io; +}; + +static void mlxbf3_gpio_irq_enable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); + irq_hw_number_t offset = irqd_to_hwirq(irqd); + unsigned long flags; + u32 val; + + gpiochip_enable_irq(gc, offset); + + raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + writel(BIT(offset), gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); + + val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); + val |= BIT(offset); + writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); +} + +static void mlxbf3_gpio_irq_disable(struct irq_data *irqd) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); + irq_hw_number_t offset = irqd_to_hwirq(irqd); + unsigned long flags; + u32 val; + + raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + val = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); + val &= ~BIT(offset); + writel(val, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_EVTEN0); + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); + + gpiochip_disable_irq(gc, offset); +} + +static irqreturn_t mlxbf3_gpio_irq_handler(int irq, void *ptr) +{ + struct mlxbf3_gpio_context *gs = ptr; + struct gpio_chip *gc = &gs->gc; + unsigned long pending; + u32 level; + + pending = readl(gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CAUSE_EVTEN0); + writel(pending, gs->gpio_cause_io + MLXBF_GPIO_CAUSE_OR_CLRCAUSE); + + for_each_set_bit(level, &pending, gc->ngpio) + generic_handle_domain_irq(gc->irq.domain, level); + + return IRQ_RETVAL(pending); +} + +static int +mlxbf3_gpio_irq_set_type(struct irq_data *irqd, unsigned int type) +{ + struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd); + struct mlxbf3_gpio_context *gs = gpiochip_get_data(gc); + irq_hw_number_t offset = irqd_to_hwirq(irqd); + unsigned long flags; + u32 val; + + raw_spin_lock_irqsave(&gs->gc.bgpio_lock, flags); + + switch (type & IRQ_TYPE_SENSE_MASK) { + case IRQ_TYPE_EDGE_BOTH: + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); + break; + case IRQ_TYPE_EDGE_RISING: + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_RISE_EN); + break; + case IRQ_TYPE_EDGE_FALLING: + val = readl(gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); + val |= BIT(offset); + writel(val, gs->gpio_io + MLXBF_GPIO_CAUSE_FALL_EN); + break; + default: + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); + return -EINVAL; + } + + raw_spin_unlock_irqrestore(&gs->gc.bgpio_lock, flags); + + irq_set_handler_locked(irqd, handle_edge_irq); + + return 0; +} + +/* This function needs to be defined for handle_edge_irq() */ +static void mlxbf3_gpio_irq_ack(struct irq_data *data) +{ +} + +static const struct irq_chip gpio_mlxbf3_irqchip = { + .name = "MLNXBF33", + .irq_ack = mlxbf3_gpio_irq_ack, + .irq_set_type = mlxbf3_gpio_irq_set_type, + .irq_enable = mlxbf3_gpio_irq_enable, + .irq_disable = mlxbf3_gpio_irq_disable, + .flags = IRQCHIP_IMMUTABLE, + GPIOCHIP_IRQ_RESOURCE_HELPERS, +}; + +static int mlxbf3_gpio_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mlxbf3_gpio_context *gs; + struct gpio_irq_chip *girq; + struct gpio_chip *gc; + int ret, irq; + + gs = devm_kzalloc(dev, sizeof(*gs), GFP_KERNEL); + if (!gs) + return -ENOMEM; + + gs->gpio_io = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(gs->gpio_io)) + return PTR_ERR(gs->gpio_io); + + gs->gpio_cause_io = devm_platform_ioremap_resource(pdev, 1); + if (IS_ERR(gs->gpio_cause_io)) + return PTR_ERR(gs->gpio_cause_io); + + gs->gpio_set_io = devm_platform_ioremap_resource(pdev, 2); + if (IS_ERR(gs->gpio_set_io)) + return PTR_ERR(gs->gpio_set_io); + + gs->gpio_clr_io = devm_platform_ioremap_resource(pdev, 3); + if (IS_ERR(gs->gpio_clr_io)) + return PTR_ERR(gs->gpio_clr_io); + gc = &gs->gc; + + ret = bgpio_init(gc, dev, 4, + gs->gpio_io + MLXBF_GPIO_READ_DATA_IN, + gs->gpio_set_io + MLXBF_GPIO_FW_DATA_OUT_SET, + gs->gpio_clr_io + MLXBF_GPIO_FW_DATA_OUT_CLEAR, + gs->gpio_set_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_SET, + gs->gpio_clr_io + MLXBF_GPIO_FW_OUTPUT_ENABLE_CLEAR, 0); + + gc->request = gpiochip_generic_request; + gc->free = gpiochip_generic_free; + gc->owner = THIS_MODULE; + + irq = platform_get_irq(pdev, 0); + if (irq >= 0) { + girq = &gs->gc.irq; + gpio_irq_chip_set_chip(girq, &gpio_mlxbf3_irqchip); + girq->default_type = IRQ_TYPE_NONE; + /* This will let us handle the parent IRQ in the driver */ + girq->num_parents = 0; + girq->parents = NULL; + girq->parent_handler = NULL; + girq->handler = handle_bad_irq; + + /* + * Directly request the irq here instead of passing + * a flow-handler because the irq is shared. + */ + ret = devm_request_irq(dev, irq, mlxbf3_gpio_irq_handler, + IRQF_SHARED, dev_name(dev), gs); + if (ret) + return dev_err_probe(dev, ret, "failed to request IRQ"); + } + + platform_set_drvdata(pdev, gs); + + ret = devm_gpiochip_add_data(dev, &gs->gc, gs); + if (ret) + dev_err_probe(dev, ret, "Failed adding memory mapped gpiochip\n"); + + return 0; +} + +static const struct acpi_device_id mlxbf3_gpio_acpi_match[] = { + { "MLNXBF33", 0 }, + {} +}; +MODULE_DEVICE_TABLE(acpi, mlxbf3_gpio_acpi_match); + +static struct platform_driver mlxbf3_gpio_driver = { + .driver = { + .name = "mlxbf3_gpio", + .acpi_match_table = mlxbf3_gpio_acpi_match, + }, + .probe = mlxbf3_gpio_probe, +}; +module_platform_driver(mlxbf3_gpio_driver); + +MODULE_DESCRIPTION("NVIDIA BlueField-3 GPIO Driver"); +MODULE_AUTHOR("Asmaa Mnebhi <asmaa@nvidia.com>"); +MODULE_LICENSE("Dual BSD/GPL");
Add support for the BlueField-3 SoC GPIO driver. This driver configures and handles GPIO interrupts. It also enables a user to manipulate certain GPIO pins via libgpiod tools or other kernel drivers. The usables pins are defined via the "gpio-reserved-ranges" property. Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com> --- drivers/gpio/Kconfig | 13 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-mlxbf3.c | 248 +++++++++++++++++++++++++++++++++++++ 3 files changed, 262 insertions(+) create mode 100644 drivers/gpio/gpio-mlxbf3.c