Message ID | 20221206124456.4159-1-edmund.berenson@emlix.com |
---|---|
State | New |
Headers | show |
Series | [1/2] dt-bindings: gpio: max7317: add gpio driver bindings | expand |
On Tue, Dec 06, 2022 at 01:44:55PM +0100, Edmund Berenson wrote: > Add driver bindings for the maxim max7317 spi > gpio expander. Bindings are for h/w, not drivers. s/maxim/Maxim/ s/spi/SPI/ For the subject, no need to say 'bindings' twice: dt-bindings: gpio: Add Maxim max7317 GPIO expander > > Co-developed-by: Lukasz Zemla <Lukasz.Zemla@woodward.com> > Signed-off-by: Lukasz Zemla <Lukasz.Zemla@woodward.com> > Signed-off-by: Edmund Berenson <edmund.berenson@emlix.com> > --- > .../bindings/gpio/gpio-max7317.yaml | 52 +++++++++++++++++++ > 1 file changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max7317.yaml > > diff --git a/Documentation/devicetree/bindings/gpio/gpio-max7317.yaml b/Documentation/devicetree/bindings/gpio/gpio-max7317.yaml > new file mode 100644 > index 000000000000..88f1fe02a627 > --- /dev/null > +++ b/Documentation/devicetree/bindings/gpio/gpio-max7317.yaml > @@ -0,0 +1,52 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/gpio/gpio-max7317.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Maxim MAX7317 SPI-Interfaced I/O Expander > + > +description: | Don't need '|' > + Bindings for 10-Port Maxim MAX7317 SPI GPIO expanders. > + > +properties: > + compatible: > + const: maxim,max7317 > + > + reg: > + maxItems: 1 > + > + gpio-controller: true > + > + '#gpio-cells': > + const: 2 > + > + gpio-line-names: > + minItems: 1 > + maxItems: 10 > + > +required: > + - compatible > + - reg > + - gpio-controller > + - "#gpio-cells" > + > +additionalProperties: false unevaluatedProperties: false Or the $ref below doesn't work. > + > +allOf: > + - $ref: /schemas/spi/spi-peripheral-props.yaml# > + > +examples: > + - | > + spi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + gpio5: gpio5@0 { gpio@0 { > + compatible = "maxim,max7317"; > + reg = <0>; > + gpio-controller; > + #gpio-cells = <2>; > + spi-max-frequency = <100000>; > + }; > + }; > -- > 2.37.4 > >
On Tue, 06 Dec 2022 13:44:55 +0100, Edmund Berenson wrote: > Add driver bindings for the maxim max7317 spi > gpio expander. > > Co-developed-by: Lukasz Zemla <Lukasz.Zemla@woodward.com> > Signed-off-by: Lukasz Zemla <Lukasz.Zemla@woodward.com> > Signed-off-by: Edmund Berenson <edmund.berenson@emlix.com> > --- > .../bindings/gpio/gpio-max7317.yaml | 52 +++++++++++++++++++ > 1 file changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-max7317.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/gpio-max7317.yaml: 'maintainers' is a required property hint: Metaschema for devicetree binding documentation from schema $id: http://devicetree.org/meta-schemas/base.yaml# /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/gpio-max7317.example.dtb: gpio5@0: 'spi-max-frequency' does not match any of the regexes: 'pinctrl-[0-9]+' From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/gpio/gpio-max7317.yaml doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20221206124456.4159-1-edmund.berenson@emlix.com The base for the series is generally the latest rc1. A different dependency should be noted in *this* patch. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit after running the above command yourself. Note that DT_SCHEMA_FILES can be set to your schema file to speed up checking your schema. However, it must be unset to test all examples with your schema.
diff --git a/Documentation/devicetree/bindings/gpio/gpio-max7317.yaml b/Documentation/devicetree/bindings/gpio/gpio-max7317.yaml new file mode 100644 index 000000000000..88f1fe02a627 --- /dev/null +++ b/Documentation/devicetree/bindings/gpio/gpio-max7317.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/gpio/gpio-max7317.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX7317 SPI-Interfaced I/O Expander + +description: | + Bindings for 10-Port Maxim MAX7317 SPI GPIO expanders. + +properties: + compatible: + const: maxim,max7317 + + reg: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + gpio-line-names: + minItems: 1 + maxItems: 10 + +required: + - compatible + - reg + - gpio-controller + - "#gpio-cells" + +additionalProperties: false + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + gpio5: gpio5@0 { + compatible = "maxim,max7317"; + reg = <0>; + gpio-controller; + #gpio-cells = <2>; + spi-max-frequency = <100000>; + }; + };