From patchwork Sun Oct 24 06:00:58 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Randy Dunlap X-Patchwork-Id: 1545339 Return-Path: X-Original-To: incoming@patchwork.ozlabs.org Delivered-To: patchwork-incoming@bilbo.ozlabs.org Authentication-Results: bilbo.ozlabs.org; dkim=pass (2048-bit key; secure) header.d=infradead.org header.i=@infradead.org header.a=rsa-sha256 header.s=bombadil.20210309 header.b=sZFxpPhk; dkim-atps=neutral Authentication-Results: ozlabs.org; spf=pass (sender SPF authorized) smtp.mailfrom=vger.kernel.org (client-ip=23.128.96.18; helo=vger.kernel.org; envelope-from=linux-gpio-owner@vger.kernel.org; receiver=) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by bilbo.ozlabs.org (Postfix) with ESMTP id 4HcSBq2bNKz9s0r for ; Sun, 24 Oct 2021 17:01:23 +1100 (AEDT) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S229638AbhJXGDZ (ORCPT ); Sun, 24 Oct 2021 02:03:25 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:33290 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S229464AbhJXGDZ (ORCPT ); Sun, 24 Oct 2021 02:03:25 -0400 Received: from bombadil.infradead.org (bombadil.infradead.org [IPv6:2607:7c80:54:e::133]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 9EDBAC061764; Sat, 23 Oct 2021 23:01:04 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=infradead.org; s=bombadil.20210309; h=Content-Transfer-Encoding: MIME-Version:Message-Id:Date:Subject:Cc:To:From:Sender:Reply-To:Content-Type: Content-ID:Content-Description:In-Reply-To:References; bh=t3ikfoCzjLUbSENr+UW7RxZj7KTsuLFbLll8f3IrlNI=; b=sZFxpPhkry6Ng21WzM1Ohn56YU hoYI1QnvXauiYFrofn3NRC8280e7vGnLHebE2HERcVKMlgrA6z4U+mgF3C34GxOVHmUzgpH0iyu1h qXpTkW7GD4aLxz4vlHXHftOcpCv58zPwz7zIrT78H33P2isBe4xEpSwVMxofznFdTX8KP1DLbRHB4 dMDJT3j0NRPhtCFV0m0kFpz54ag6c6Z6P1wLfqMYGlg+ZKO7IooLnRBbe7lO2AW8PZ2lc9R+0Ng9e OwxEBPrfPD1i4UjjonOkCMc06BB0e4Nb52Q81ZgcphYnDzkpvKWMRuBmcBOBVRaQx+mouC0vAhUnO mQbKGfBA==; Received: from [2601:1c0:6280:3f0::aa0b] (helo=bombadil.infradead.org) by bombadil.infradead.org with esmtpsa (Exim 4.94.2 #2 (Red Hat Linux)) id 1meWZ1-00Dim6-LK; Sun, 24 Oct 2021 06:00:59 +0000 From: Randy Dunlap To: linux-kernel@vger.kernel.org Cc: Randy Dunlap , Linus Walleij , Bartosz Golaszewski , linux-gpio@vger.kernel.org, Mika Westerberg , Andy Shevchenko , Geert Uytterhoeven , Sean Young , Bamvor Jian Zhang , Michael Walle Subject: [PATCH] gpio: clean up Kconfig file Date: Sat, 23 Oct 2021 23:00:58 -0700 Message-Id: <20211024060058.6719-1-rdunlap@infradead.org> X-Mailer: git-send-email 2.31.1 MIME-Version: 1.0 Precedence: bulk List-ID: X-Mailing-List: linux-gpio@vger.kernel.org Fix multiple problems in punctuation, capitalization, grammar, wording, and typos in the GPIO Kconfig file. Signed-off-by: Randy Dunlap Cc: Linus Walleij Cc: Bartosz Golaszewski Cc: linux-gpio@vger.kernel.org Cc: Mika Westerberg Cc: Andy Shevchenko Cc: Geert Uytterhoeven Cc: Sean Young Cc: Bamvor Jian Zhang Cc: Michael Walle Acked-by: Andy Shevchenko --- drivers/gpio/Kconfig | 116 ++++++++++++++++++++--------------------- 1 file changed, 58 insertions(+), 58 deletions(-) --- linux-next-20211022.orig/drivers/gpio/Kconfig +++ linux-next-20211022/drivers/gpio/Kconfig @@ -15,7 +15,7 @@ menuconfig GPIOLIB bool "GPIO Support" help This enables GPIO support through the generic GPIO library. - You only need to enable this, if you also want to enable + You only need to enable this if you also want to enable one or more of the GPIO drivers below. If unsure, say N. @@ -140,8 +140,8 @@ config GPIO_AMDPT depends on ACPI select GPIO_GENERIC help - driver for GPIO functionality on Promontory IOHub - Require ACPI ASL code to enumerate as a platform device. + Driver for GPIO functionality on Promontory IOHub. + Requires ACPI ASL code to enumerate as a platform device. config GPIO_ASPEED tristate "Aspeed GPIO support" @@ -306,7 +306,7 @@ config GPIO_HISI help Say Y or M here to build support for the HiSilicon GPIO controller driver GPIO block. - This GPIO controller support double-edge interrupt and multi-core + This GPIO controller supports double-edge interrupt and multi-core concurrent access. config GPIO_HLWD @@ -326,7 +326,7 @@ config GPIO_ICH help Say yes here to support the GPIO functionality of a number of Intel ICH-based chipsets. Currently supported devices: ICH6, ICH7, ICH8 - ICH9, ICH10, Series 5/3400 (eg Ibex Peak), Series 6/C200 (eg + ICH9, ICH10, Series 5/3400 (e.g. Ibex Peak), Series 6/C200 (e.g. Cougar Point), NM10 (Tiger Point), and 3100 (Whitmore Lake). If unsure, say N. @@ -337,7 +337,7 @@ config GPIO_IOP select GPIO_GENERIC help Say yes here to support the GPIO functionality of a number of Intel - IOP32X or IOP33X. + IOP32X or IOP33X series of chips. If unsure, say N. @@ -364,7 +364,7 @@ config GPIO_LOONGSON bool "Loongson-2/3 GPIO support" depends on CPU_LOONGSON2EF || CPU_LOONGSON64 help - driver for GPIO functionality on Loongson-2F/3A/3B processors. + Driver for GPIO functionality on Loongson-2F/3A/3B processors. config GPIO_LPC18XX tristate "NXP LPC18XX/43XX GPIO support" @@ -392,15 +392,15 @@ config GPIO_MENZ127 depends on MCB select GPIO_GENERIC help - Say yes here to support the MEN 16Z127 GPIO Controller + Say yes here to support the MEN 16Z127 GPIO Controller. config GPIO_MM_LANTIQ bool "Lantiq Memory mapped GPIOs" depends on LANTIQ && SOC_XWAY help This enables support for memory mapped GPIOs on the External Bus Unit - (EBU) found on Lantiq SoCs. The gpios are output only as they are - created by attaching a 16bit latch to the bus. + (EBU) found on Lantiq SoCs. The GPIOs are output only as they are + created by attaching a 16-bit latch to the bus. config GPIO_MPC5200 def_bool y @@ -424,7 +424,7 @@ config GPIO_MT7621 select GPIO_GENERIC select GPIOLIB_IRQCHIP help - Say yes here to support the Mediatek MT7621 SoC GPIO device + Say yes here to support the Mediatek MT7621 SoC GPIO device. config GPIO_MVEBU def_bool y @@ -469,7 +469,7 @@ config GPIO_PL061 select IRQ_DOMAIN select GPIOLIB_IRQCHIP help - Say yes here to support the PrimeCell PL061 GPIO device + Say yes here to support the PrimeCell PL061 GPIO device. config GPIO_PMIC_EIC_SPRD tristate "Spreadtrum PMIC EIC support" @@ -483,7 +483,7 @@ config GPIO_PXA bool "PXA GPIO support" depends on ARCH_PXA || ARCH_MMP || COMPILE_TEST help - Say yes here to support the PXA GPIO device + Say yes here to support the PXA GPIO device. config GPIO_RCAR tristate "Renesas R-Car and RZ/G GPIO support" @@ -573,7 +573,7 @@ config GPIO_SPEAR_SPICS depends on PLAT_SPEAR select GENERIC_IRQ_CHIP help - Say yes here to support ST SPEAr SPI Chip Select as GPIO device + Say yes here to support ST SPEAr SPI Chip Select as GPIO device. config GPIO_SPRD tristate "Spreadtrum GPIO support" @@ -598,8 +598,8 @@ config GPIO_STP_XWAY help This enables support for the Serial To Parallel (STP) unit found on XWAY SoC. The STP allows the SoC to drive a shift registers cascade, - that can be up to 24 bit. This peripheral is aimed at driving leds. - Some of the gpios/leds can be auto updated by the soc with dsl and + that can be up to 24 bits. This peripheral is aimed at driving LEDs. + Some of the GPIOs/LEDs can be auto updated by the SoC with DSL and phy status. config GPIO_SYSCON @@ -679,10 +679,10 @@ config GPIO_VISCONTI Say yes here to support GPIO on Tohisba Visconti. config GPIO_VR41XX - tristate "NEC VR4100 series General-purpose I/O Uint support" + tristate "NEC VR4100 series General-purpose I/O Unit support" depends on CPU_VR41XX help - Say yes here to support the NEC VR4100 series General-purpose I/O Uint + Say yes here to support the NEC VR4100 series General-purpose I/O Unit. config GPIO_VX855 tristate "VIA VX855/VX875 GPIO" @@ -690,14 +690,14 @@ config GPIO_VX855 select MFD_CORE select MFD_VX855 help - Support access to the VX855/VX875 GPIO lines through the gpio library. + Support access to the VX855/VX875 GPIO lines through the GPIO library. - This driver provides common support for accessing the device, - additional drivers must be enabled in order to use the + This driver provides common support for accessing the device. + Additional drivers must be enabled in order to use the functionality of the device. config GPIO_WCD934X - tristate "Qualcomm Technologies Inc WCD9340/WCD9341 gpio controller driver" + tristate "Qualcomm Technologies Inc WCD9340/WCD9341 GPIO controller driver" depends on MFD_WCD934X && OF_GPIO help This driver is to support GPIO block found on the Qualcomm Technologies @@ -727,7 +727,7 @@ config GPIO_XILINX select GPIOLIB_IRQCHIP depends on OF_GPIO help - Say yes here to support the Xilinx FPGA GPIO device + Say yes here to support the Xilinx FPGA GPIO device. config GPIO_XLP tristate "Netlogic XLP GPIO support" @@ -748,7 +748,7 @@ config GPIO_XTENSA depends on !SMP help Say yes here to support the Xtensa internal GPIO32 IMPWIRE (input) - and EXPSTATE (output) ports + and EXPSTATE (output) ports. config GPIO_ZEVIO bool "LSI ZEVIO SoC memory mapped GPIOs" @@ -764,14 +764,14 @@ config GPIO_ZYNQ Say yes here to support Xilinx Zynq GPIO controller. config GPIO_ZYNQMP_MODEPIN - tristate "ZynqMP ps-mode pin gpio configuration driver" + tristate "ZynqMP ps-mode pin GPIO configuration driver" depends on ZYNQMP_FIRMWARE default ZYNQMP_FIRMWARE help - Say yes here to support the ZynqMP ps-mode pin gpio configuration + Say yes here to support the ZynqMP ps-mode pin GPIO configuration driver. - This ps-mode pin gpio driver is based on GPIO framework, PS_MODE + This ps-mode pin GPIO driver is based on GPIO framework. PS_MODE is 4-bits boot mode pins. It sets and gets the status of the ps-mode pin. Every pin can be configured as input/output. @@ -785,12 +785,12 @@ config GPIO_LOONGSON1 config GPIO_AMD_FCH tristate "GPIO support for AMD Fusion Controller Hub (G-series SOCs)" help - This option enables driver for GPIO on AMDs Fusion Controller Hub, - as found on G-series SOCs (eg. GX-412TC) + This option enables driver for GPIO on AMD's Fusion Controller Hub, + as found on G-series SOCs (e.g. GX-412TC). - Note: This driver doesn't registers itself automatically, as it - needs to be provided with platform specific configuration. - (See eg. CONFIG_PCENGINES_APU2.) + Note: This driver doesn't register itself automatically, as it + needs to be provided with platform-specific configuration. + (See e.g. CONFIG_PCENGINES_APU2.) config GPIO_MSC313 bool "MStar MSC313 GPIO support" @@ -800,7 +800,7 @@ config GPIO_MSC313 select IRQ_DOMAIN_HIERARCHY help Say Y here to support the main GPIO block on MStar/SigmaStar - ARMv7 based SoCs. + ARMv7-based SoCs. config GPIO_IDT3243X tristate "IDT 79RC3243X GPIO support" @@ -809,7 +809,7 @@ config GPIO_IDT3243X select GPIOLIB_IRQCHIP help Select this option to enable GPIO driver for - IDT 79RC3243X based devices like Mikrotik RB532. + IDT 79RC3243X-based devices like Mikrotik RB532. To compile this driver as a module, choose M here: the module will be called gpio-idt3243x. @@ -887,7 +887,7 @@ config GPIO_IT87 well. To compile this driver as a module, choose M here: the module will - be called gpio_it87 + be called gpio_it87. config GPIO_SCH tristate "Intel SCH/TunnelCreek/Centerton/Quark X1000 GPIO" @@ -903,7 +903,7 @@ config GPIO_SCH powered by the core power rail and are turned off during sleep modes (S3 and higher). The remaining four GPIOs are powered by the Intel SCH suspend power supply. These GPIOs remain - active during S3. The suspend powered GPIOs can be used to wake the + active during S3. The suspend-powered GPIOs can be used to wake the system from the Suspend-to-RAM state. The Intel Tunnel Creek processor has 5 GPIOs powered by the @@ -1056,7 +1056,7 @@ config GPIO_PCA953X_IRQ select GPIOLIB_IRQCHIP help Say yes here to enable the pca953x to be used as an interrupt - controller. It requires the driver to be built in the kernel. + controller. config GPIO_PCA9570 tristate "PCA9570 4-Bit I2C GPO expander" @@ -1183,7 +1183,7 @@ config GPIO_CRYSTAL_COVE help Support for GPIO pins on Crystal Cove PMIC. - Say Yes if you have a Intel SoC based tablet with Crystal Cove PMIC + Say Yes if you have a Intel SoC-based tablet with Crystal Cove PMIC inside. This driver can also be built as a module. If so, the module will be @@ -1213,7 +1213,7 @@ config GPIO_DA9055 Say yes here to enable the GPIO driver for the DA9055 chip. The Dialog DA9055 PMIC chip has 3 GPIO pins that can be - be controller by this driver. + be controlled by this driver. If driver is built as a module it will be called gpio-da9055. @@ -1235,7 +1235,7 @@ config HTC_EGPIO help This driver supports the CPLD egpio chip present on several HTC phones. It provides basic support for input - pins, output pins, and irqs. + pins, output pins, and IRQs. config GPIO_JANZ_TTL tristate "Janz VMOD-TTL Digital IO Module" @@ -1296,8 +1296,8 @@ config GPIO_MAX77620 help GPIO driver for MAX77620 and MAX20024 PMIC from Maxim Semiconductor. MAX77620 PMIC has 8 pins that can be configured as GPIOs. The - driver also provides interrupt support for each of the gpios. - Say yes here to enable the max77620 to be used as gpio controller. + driver also provides interrupt support for each of the GPIOs. + Say yes here to enable the max77620 to be used as GPIO controller. config GPIO_MAX77650 tristate "Maxim MAX77650/77651 GPIO support" @@ -1319,8 +1319,8 @@ config GPIO_RC5T583 help Select this option to enable GPIO driver for the Ricoh RC5T583 chip family. - This driver provides the support for driving/reading the gpio pins - of RC5T583 device through standard gpio library. + This driver provides the support for driving/reading the GPIO pins + of RC5T583 device through standard GPIO library. config GPIO_SL28CPLD tristate "Kontron sl28cpld GPIO support" @@ -1389,7 +1389,7 @@ config GPIO_TPS65912 tristate "TI TPS65912 GPIO" depends on MFD_TPS65912 help - This driver supports TPS65912 gpio chip + This driver supports TPS65912 GPIO chip. config GPIO_TPS68470 bool "TPS68470 GPIO" @@ -1397,7 +1397,7 @@ config GPIO_TPS68470 help Select this option to enable GPIO driver for the TPS68470 chip family. - There are 7 GPIOs and few sensor related GPIOs supported + There are 7 GPIOs and few sensor-related GPIOs supported by the TPS68470. While the 7 GPIOs can be configured as input or output as appropriate, the sensor related GPIOs are "output only" GPIOs. @@ -1442,7 +1442,7 @@ config GPIO_WHISKEY_COVE help Support for GPIO pins on Whiskey Cove PMIC. - Say Yes if you have a Intel SoC based tablet with Whiskey Cove PMIC + Say Yes if you have an Intel SoC-based tablet with Whiskey Cove PMIC inside. This driver can also be built as a module. If so, the module will be @@ -1479,10 +1479,10 @@ config GPIO_AMD8111 depends on X86 || COMPILE_TEST depends on HAS_IOPORT_MAP help - The AMD 8111 south bridge contains 32 GPIO pins which can be used. + The AMD 8111 southbridge contains 32 GPIO pins which can be used. - Note, that usually system firmware/ACPI handles GPIO pins on their - own and users might easily break their systems with uncarefull usage + Note that usually system firmware/ACPI handles GPIO pins on their + own and users might easily break their systems with uncareful usage of this driver! If unsure, say N @@ -1530,22 +1530,22 @@ config GPIO_ML_IOH select GENERIC_IRQ_CHIP help ML7213 is companion chip for Intel Atom E6xx series. - This driver can be used for OKI SEMICONDUCTOR ML7213 IOH(Input/Output - Hub) which is for IVI(In-Vehicle Infotainment) use. + This driver can be used for OKI SEMICONDUCTOR ML7213 IOH (Input/Output + Hub) which is for IVI (In-Vehicle Infotainment) use. This driver can access the IOH's GPIO device. config GPIO_PCH - tristate "Intel EG20T PCH/LAPIS Semiconductor IOH(ML7223/ML7831) GPIO" + tristate "Intel EG20T PCH/LAPIS Semiconductor IOH (ML7223/ML7831) GPIO" depends on X86_32 || MIPS || COMPILE_TEST select GENERIC_IRQ_CHIP help - This driver is for PCH(Platform controller Hub) GPIO of Intel Topcliff - which is an IOH(Input/Output Hub) for x86 embedded processor. + This driver is for PCH (Platform Controller Hub) GPIO of Intel Topcliff, + which is an IOH (Input/Output Hub) for x86 embedded processor. This driver can access PCH GPIO device. - This driver also can be used for LAPIS Semiconductor IOH(Input/ + This driver also can be used for LAPIS Semiconductor IOH (Input/ Output Hub), ML7223 and ML7831. - ML7223 IOH is for MP(Media Phone) use. + ML7223 IOH is for MP (Media Phone) use. ML7831 IOH is for general purpose use. ML7223/ML7831 is companion chip for Intel Atom E6xx series. ML7223/ML7831 is completely compatible for Intel EG20T PCH. @@ -1596,7 +1596,7 @@ config GPIO_74X164 help Driver for 74x164 compatible serial-in/parallel-out 8-outputs shift registers. This driver can be used to provide access - to more gpio outputs. + to more GPIO outputs. config GPIO_MAX3191X tristate "Maxim MAX3191x industrial serializer"