diff mbox series

[2/6] dt-bindings: pinctrl: qcom,pmic-mpp: switch to #interrupt-cells

Message ID 20211004232225.2260665-3-dmitry.baryshkov@linaro.org
State New
Headers show
Series pinctrl: qcom: convert ssbi-mpp and spmi-mpp to hierarchical IRQ | expand

Commit Message

Dmitry Baryshkov Oct. 4, 2021, 11:22 p.m. UTC 
Stop specifying individual interrupts properties. Use #interrupt-cells
instead as we are switching qcom,spmi-mpp and qcom,ssbi-mpp to
hierarchical IRQ setup.

Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
---
 .../devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml  | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
index 96cb78ab6437..ba16d8553c0b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-mpp.yaml
@@ -40,12 +40,10 @@  properties:
   reg:
     maxItems: 1
 
-  interrupts:
-    minItems: 1
-    maxItems: 12
-    description:
-      Must contain an array of encoded interrupt specifiers for
-      each available MPP
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
 
   gpio-controller: true
 
@@ -161,7 +159,8 @@  examples:
       gpio-controller;
       #gpio-cells = <2>;
       gpio-ranges = <&pm8841_mpp 0 0 4>;
-      interrupts = <4 0xa0 0 0>, <4 0xa1 0 0>, <4 0xa2 0 0>, <4 0xa3 0 0>;
+      interrupt-controller;
+      #interrupt-cells = <2>;
 
       pinctrl-names = "default";
       pinctrl-0 = <&pm8841_default>;